hey guys I'm after an aftermarket ac condenser foe my gtr 32 I thought someone would make them like they make after market radiator's just so I don't have to buy a genuine condenser can anyone help part number , brands etc ?
whats the best pads to use if the discs have heaps of meat left and arnt cracked.
ps they have been working fine just getting low on pads but there is slight groves in discs etc
hey guys my gtr 32 is due for a brake service i have standard bakes all round on my r 32 gtr. pads are pretty worn down im unsure on what pads are in it. car is making close to 500 hp at 4.
are the standard drilled rotors ok to use again can you get them machined? and i am wanting to know what good pads i can put back in the car is a street car mainly might do a little track in the future.
hey guys i have an issue when i hit hard acceleration i have a vibration go through the rear but it seems to smoothen out after past a certain rev range.had garage 101 look at it they couldnt see anything noticeable.and said it maybee could be diff...? what do you guys reckon .it drives normal the rest of the time .
yeah but it grabs normal when u let it out its like there not enough pressure holding the fork . ps it comes and goes aswell its not like this all the time it just started doing it
hi guys my 32 gtr starting creeping forward when i pulled up to an intersection when i had it n first gear and was hard to pull back into neutral when clutch was in all the way
what could the problem be and how do i diagnose whether its the slave cylinder or master cylinder ? the fluid level still seems to be pretty full .
also clutch is brand new
please pm me
thanks
ok i have found the problem was tyres all along 2 tyres on front were bigger dimension tread orsomething changed front ones to back and back one to front and it seems to be all good
attessa does prime . it has standard gtr 32 rim s with 245 50 16 bridge stone on front and federal on back I the front s are about 80 pierce t and tube back about 60 .
g sensors have been swapped out along with ecm.and front wheel speed sensors
I'm not sure about the fluid I transfer case . but I know 4wd been fully bled ..actually is a bit over full in resivour .
origonaly it had 225 on front and 245 on rear . then someone told me they should be same all round so I changed the front to 245 50 16 same as rear.
what next ???
hey guys I have a 4wd issue when I go over 80 kms in 4wd mode only it jerks I have had garage 101 look at it changed out ecm for 4wd chdecked for fault codes and is not logging and codes . I have changed my types on front so they are all the same all round . still makes no difference I notice when I'm cruising along my torque gauge is sitting .at about 10 before I put the foot Down so it's like that when cruising and when it jerks the gauge goes up and Down. I 2wd it's fine no problem we also changed out fro.nt speed sensors to test made no diff
can someone please point us in the right direction
I have a nistune ecu and a fresh built forged 26 I need a run in tune done Allstar and hyperdrive are booked out .
Pease pm me I Can't find anything in search