Jump to content
SAU Community

vladr33

Members
  • Posts

    16
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by vladr33

  1. i got low mount.. makn 423.3 rwhp on hypers dyno,... 21psi gt30 .82 housing
  2. on gate sideways is how u should drive in the rain
  3. thanks for the replies guys. no im not doing head work, im aware that the poncam is drop in but does ne1 no ssize. like degree and lift ect... i got told by some1 tomei. 260 deg, 9.1mm lift?? i've seen hks 264 deg same lift 9.1mm lift ,, does iot matter if u have more degree and keep the lift the same??
  4. hey guys i have an r33 skyline, and am looking to buy cams. was wondering if anybody knew whats the biggest size cam you can get without doing work to the head etc.. thanks guys
  5. hey guys, i went to change my cams, and took off the exhaust rocker covers off to find my cam surrounded by green coolant?? have i blown my headgasket, ne ideas ne one? i started my car this morning and it did not overheat :S
  6. i was told the belt was to tight to have skipped. no i dont have cam gears, id like some
  7. try putting the standard bov back on and see if ur getting the same problem, if not id say the bov is dodgy or not put in properly. does the bov have an adjustment for hard n soft
  8. hey guys, i have a r33 with a low mount 6 boost and a gt3076r with o.82 ar. When tuned my car didnt make the power i wanted and is laggy. what figures should i be expecting. last week took it to a garage and they spotted that my timing belt is on wrong, out 1 tooth to the retarded side. if i get this problem fixed will i see hp increase and better response???? thanks guys
  9. problem fixed. half moon of cam lobe snapped off.. thanks everyone for the help
  10. it cant be cam angle sensor otherwise i wouldnt have spark. ive tried to unplug afm, but no luck. im running out of options. maybe not enough fuel pressure????
  11. hey guys was wondering if ne 1 could help me out. i was at powercruise last weekend lining up n my car started idling lumpy, then tried to take off and it stalled and didnt start AGAIN. Car cranks ova but doesnt start. i have check for fuel and spark and all good. and all intercooler pipes are sweet and boost lines. any ideas ne1 car runs a power fc
  12. yeah had a mate say that but we checked it but didnt seem like it, whats the major sign?
  13. hey man, yeah we checked the fuel by like you sed pulling it off and turning ignition and it had fuel. we tested spark by pulling out the coil and plug and sitting it up and turning it over and it was making spark so im kinda thinking cas sensor to... but thanks for all ya feed back. so what you reackon? if it helps was in powercruise the day before giving it abit and then burnout comp that nyt.. but started fine in the mornong.. lol cheers ya help
  14. hey guys just wondering if someone could help me out. i've got a r33 with s2 rb25det, 6boost, big garrett and making 400hp but on sunday i got up, started it was running good, then drove to the track for powercruise (wa) and was waiting in line on idle and it decided it had pro cams in it and startd idling lumpy then when i went to take off it stalled n from then on i couldn't get it started agen....... see my problem lol. i checkd it yesterday and pulled out no.1 plug and it was dry after tryna turn it over few time and made sure it was geting spark witch it was and checked the other ones and they were wet but not dripping... but all getting spark and battery is allil dead but we had jumper leads on but still wouldnt start just turns over.... any ideas would be much apprecaited. cheers
×
×
  • Create New...