Jump to content
SAU Community

ShyBoi

Members
  • Posts

    940
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by ShyBoi

  1. Just bought my blue LED dash lights off Beau from here, but mines a 33 need to take out from centre console up across the the cluster to get in behind. Not 100% where the screws are for the 34...mine was: 2 behind cigarette butting tray pulled up the surrounding for the gearbox, then 2 screws at base holding centre console then have to remove plugs for the hazards, demister, clock and other fittings at the top and a/c on door side of steering wheel drop the steering wheel so u can pull the centre console out two screws in base on cluster casing and two in the top then 1 main screw holding cluster in place at the top then pull it forward should be 5 or 6 globes to replace all the LEDS
  2. just redone my interior from previous owners damage, now im goin to clean up the wheel arches especially the brake calipers looks awsuM! How long did it take u to do it?
  3. agreed with adam as I have one a quick polish will get rid of the black/brown marks u can see on it...no actual damages from what i can see unless Adam bottomed it out on a driveway and u can see it
  4. just giving some general ones, but Jun for sure
  5. Dont get the veilside rear bar...agreed worst one you can get so out of shape Look at bodykits like Trust, Do-Luck for front bars Either Bomex, 400R, Do-Luck Skirts 400R, Do-Luck Rear Bar
  6. Definately C-West front bar and skirts, skirts are similar to bomex as well with slight difference
  7. Im currently getting Top Stage in melbourne to make these c/f skirts and splitter and aprons for my r33...maybe they'll keep producing if there's a high demand for them
  8. Very interested to see how this project goes as I'm using a fair bit of C/F on my project but not the full body panels extent only: Duck Wing Bonnet Front Splitter Side Skirts B Pillars Exhaust Shroud Door Inserts Rear Aprons Door Sills Have seen this done on a car in UK, but still want to see how this goes. As its hard for Aussie project builders to source certain parts, Ill probz have to get door inserts from F1.
  9. You can definately pick up kits for $600 from places but they dont always fit properly and can need alot more work...geuine kits like Trust/Do-Luck etc...cost more but are better quality unless they are cheap replicas
  10. There's heaps of places to pick up kits depending where bouts you are: Top Stage (Melb) Viva Garage (SA) Car Mate (Syd) PSI Parts (Melb) Garage-13.com (Melb) GT Autostyle (Syd) J-Racing (ACT)
  11. +1 angle up the sides as well would look clean and no cop probz Other than that you've done a topz job with the lip...
  12. They just are cops and couldnt get me for too low, engine mods and exhaust...so they picked on me for the sticker If I knew the roadworthy regulations i wud have stood up to them...but I didnt and they were going to fine me $185 cause it was supposedly obscuring my view, but for anyone here who drives a skyline would know that cause of the seating height it doesnt interfere with our view
  13. Have had a banner across my windscreen for like 6 months now, got told last week by cops not allowed it due to lack of visibility...read the roadworthy regulations as long as its above the range of the windscreen wipers its legal...so pissed off i had to remove it
  14. Sure thing it'll hopefully be done within July but obviously not all of it, main thing is the white pearlescent respray wont be done until everything else is bought and ready to fit... Basically picture this atm: Front: R34 Vspec front bar on a R33 Got sum custom aggressive looking f/g eyelids, not those sleepy ones C/F Z-tune bonnet C/F Front splitter to fit Vspec front bar Sides: Custom skirts with wide rear GTR style fenders with a carbon fibre lip along the bases Rear: C/F Duck Wing Not 100% about what rear bar I'm going to replace it with just yet but want one which I can make the centre look like C/F rear diffuser until I can afford to get a real one C/F Exhaust Shroud C/F Rear Aprons Basically white pearlescent paintjob with a nice c/f line around the base...so it'll look clean
  15. only found these ones in UK...but vivagarage have them but on for 32's not 3 or 4's...otherwise they'd already b in my car
  16. Check out the following places I'm doing alot of CF Exterior mods to my car, and general interior parts: Sniper Racing PSI Parts Viva Garage Carmate What parts are you after specifically, here's the list of what I'm doing Bonnet Front Lip Side Skirts (Custom made by Top Stage) Replica of the Z-Tune R34 ones Rear Aprons B Pillars (Nengun) Depends if your after genuine or overlays Door Sills (PSI Parts) $199 Door Inserts/Cards (Not the exterior panel the interior) Exhaust Shroud (PSI Parts) $99 Duck Wing (PSI Parts) $299 Did come across a whole R33 c/f dash but it was $3500...so not going to waste my money its only a show car not a track car
  17. Im getting C/F Door Inserts for my R33...can get them either Blank, with GTST or GTR...
  18. his speedo is worth the customizing looks sick...surprised he hasnt splashed out $3.5k for the full c/f dash on it yet maybe thats coming soon still
  19. Im putting alot of c/f on my car but for exterior mods...so will have weight saving
  20. hav already emailed u guys at psi but thanks for the heads up last i knew was still 2 weeks till you had them in stock...will also grab a set of 33 c/f door sills when i get a duck wing off u guys
  21. Nuh the conversion guards would be fibre glass not c/f as the whole cars being resprayed quad layer white pearlescent to show off the c/f accessories The main c/f parts cops harass u about is the bonnet when people dont secure then properly as they are lightweight and under pressure can come off and its happened to my mate
  22. think psi parts had this...not 100% if not mayb vivagarage
  23. thats what i thought i saw
  24. Yeh jsai is takin a while havent heard any replies...
×
×
  • Create New...