2FST4U.R33

I belive it is although not 100% sure. Yep springs are also different to stock (I believe a stiffer spring rate) Best condition shocks i've seen come out of a 15YO car. The only issue (if u can even call it that) is the that the shock rubber boot is split chasing $100 for the pair I'll have to check. If i have them chasing $15ea. Will let u know next weekend when i'm back in adelaide

bump

Got a heap of parts to get rid of. Moving at the end of the month and want to get rid of as much of it as possible. Make a decent offer and it's urs S13/180SX - STOCK stock front pipe stock dump pipe with oxy sensor 4 stud hubs with good bearings sr turbo front brakes with disks and pads Hicas power steering resivour with level sensor Hicas subframe with all Hicas lines, senders, lower control arms, disks & knuckles AC condensor with lines AC compressor with idler and brackets R180 diff (suit 5x1 half shafts) half shafts (5x1) interior fan and heater core AC interor core hicas PS pump T25 turbo on standard manifold clutch fan shroud stock intercooler with piping & BOV charcol canister standard suspension arms most interior parts available AFTERMARKET Blitz aluminium mandrel bent piping to suit front mount 3" front dump pipe (mandrel bent, mild steel) with oxy sensor C34 STAGEA wrecking a c34 stagea (no gbx, motor), if any parts u want aren't listed let me know as i probably have it nismo front suspension (springs & shocks, not height adjustable) standard rear suspension (springs & shocks) interor fan with heater core AC interior core front seats door shells rear hatch shell roof rack dash carpet (minus hatch area) headliner visors rear seats (top section only) steering wheel (with radio controls) no centre auto shifter wiper and indicator stalk assemblies front & rear seat belts front AWD knuckles with 5 stud hubs ABS unit front X-member rad overflow bottle (good condition) UNIVERSAL 5x114.3 space saver spares floor mats 4x114.3 space saver spares 4x 17"x7.5ish ROH adrenalin rims without tyres (4x114.3). can get specific offset/width if required. Can be freshly sprayed (rattle can) if needed 4x 17"X7.5ish speedy rims with pretty much gone tyres, one rim damaged (probs beyond repair). 4x114.3. can get specific offset/width if required. Also have an NA R33 manual with full kit and a MQ patrol diesel 4 speed man for sale, soon to be posted ph. 0407971706

Got a heap of parts to get rid of. Moving at the end of the month and want to get rid of as much of it as possible. Make a decent offer and it's urs S13/180SX - STOCK stock front pipe stock dump pipe with oxy sensor 4 stud hubs with good bearings sr turbo front brakes with disks and pads Hicas power steering resivour with level sensor Hicas subframe with all Hicas lines, senders, lower control arms, disks & knuckles AC condensor with lines AC compressor with idler and brackets R180 diff (suit 5x1 half shafts) half shafts (5x1) interior fan and heater core AC interor core hicas PS pump T25 turbo on standard manifold clutch fan shroud stock intercooler with piping & BOV charcol canister standard suspension arms most interior parts available AFTERMARKET Blitz aluminium mandrel bent piping to suit front mount 3" front dump pipe (mandrel bent, mild steel) with oxy sensor C34 STAGEA wrecking a c34 stagea (no gbx, motor), if any parts u want aren't listed let me know as i probably have it nismo front suspension (springs & shocks, not height adjustable) standard rear suspension (springs & shocks) interor fan with heater core AC interior core front seats door shells rear hatch shell roof rack dash carpet (minus hatch area) headliner visors rear seats (top section only) steering wheel (with radio controls) no centre auto shifter wiper and indicator stalk assemblies front & rear seat belts front AWD knuckles with 5 stud hubs ABS unit front X-member rad overflow bottle (good condition) UNIVERSAL 5x114.3 space saver spares floor mats 4x114.3 space saver spares 4x 17"x7.5ish ROH adrenalin rims without tyres (4x114.3). can get specific offset/width if required. Can be freshly sprayed (rattle can) if needed 4x 17"X7.5ish speedy rims with pretty much gone tyres, one rim damaged (probs beyond repair). 4x114.3. can get specific offset/width if required. Also have an NA R33 manual with full kit and a MQ patrol diesel 4 speed man for sale, soon to be posted ph 0407971706

Nismo shocks/springs are sold

shell and wiring loom goes to the scrap yard next week let me know ASAP if ur after anything

bump

going to be dropping the stripped shell with all wiring at the wreckers in the next week or so If there are any connectors/peices of loom that people want let me know ASAP and i'll cut it out of the loom for you, happy to give it away if u pay postage/pick it up in either whyalla or adelaide

if u mean roof then yes, if u meant the actual hood then no, car had a pretty solid front end hit so no pannels infront of the doors btw located in whyalla, but in adelaide every second weekend the followng parts have sold 180sx clutch fan shroud stagea front doors stagea rear hatch stagea front half shafts all other parts still available

bit of an odd question, but attempting to upgrade some rear half shafts and it seems as if v35 also have 1515mm of rear track are u able to do me a massive favour and take a photo of the bolt pattern and get a couple of dimensions for me? after the width of the diff (between the flanges) diameter of the shaft diameter of the bolt if it all works out i'll take at least the half shafts off u (if ur willing to separate parts)

nah sorry didn't come with the car

should be coming thru now. Been away all weekend

Got a heap of parts in the shed i need to clear out S13/180SX - STOCK stock front pipe - $30 stock dump pipe with oxy sensor - $50 4 stud hubs with good bearings - $10ea sr turbo front brakes with disks and pads - $100 Hicas power steering resivour with level sensor - $50 Hicas subframe with all Hicas lines, senders, lower control arms, disks & knuckles - $150 AC condensor with lines - $30 AC compressor with idler and brackets - $50 R180 diff (suit 5x1 half shafts) - $100 half shafts (5x1) - $50ea interior fan and heater core - $15 AC interor core - $15 hicas PS pump - $50 T25 turbo on standard manifold - $150 clutch fan shroud - $35 stock intercooler with piping & BOV - $50 charcol canister - $5 standard suspension arms - $20ea most interior parts available AFTERMARKET Blitz aluminium mandrel bent piping to suit front mount - $150 3" front dump pipe (mandrel bent, mild steel) with oxy sensor - $50 C34 STAGEA wrecking a c34 stagea (no gbx, motor, suspension or brakes), if any parts u want aren't listed let me know as i probably have it front nismo shocks and springs - $150 rear standard shocks and springs $100 interor fan with heater core - $15 AC interior core - $15 front seats - $50ea door shells - $30ea rear hatch shell - $40 roof rack - $30 passenger side rear hatch glass - $50 dash - $50 carpet (minus hatch area) - $15 headliner - $15 visors - $5ea rear seats (top section only) - $40 steering wheel (with radio controls) no centre - $40 auto shifter - $25 wiper and indicator stalk assemblies - $30ea front & rear seat belts - $30ea (or the lot for $120) front driveshafts (drivers side needs repair) - $30 front AWD knuckles - $30ea ABS unit - $30 front X-member - $30 rad overflow bottle (good condition) - $25 UNIVERSAL 5x114.3 space saver spares - $25ea floor mats - $5 set

bump

i'll get them 2nite and post them up Also have standard rear shocks/springs and Nismo fronts to suit stagea,etc

bump

oh and u can contact me on 040797one seven zerosix

Got a heap of parts in the shed i need to clear out S13/180SX - STOCK stock front pipe - $30 stock dump pipe with oxy sensor - $50 4 stud hubs with good bearings - $10ea sr turbo front brakes with disks and pads - $100 Hicas power steering resivour with level sensor - $50 Hicas subframe with all Hicas lines, senders, lower control arms, disks & knuckles - $150 AC condensor with lines - $30 AC compressor with idler and brackets - $50 R180 diff (suit 5x1 half shafts) - $100 half shafts (5x1) - $50ea interior fan and heater core - $15 AC interor core - $15 hicas PS pump - $50 T25 turbo on standard manifold - $150 clutch fan shroud - $35 stock intercooler with piping & BOV - $50 charcol canister - $5 standard suspension arms - $20ea most interior parts available AFTERMARKET Blitz aluminium mandrel bent piping to suit front mount - $150 3" front dump pipe (mandrel bent, mild steel) with oxy sensor - $50 C34 STAGEA wrecking a c34 stagea (no gbx, motor, suspension or brakes), if any parts u want aren't listed let me know as i probably have it interor fan with heater core - $15 AC interior core - $15 front seats - $50ea door shells - $30ea rear hatch shell - $40 roof rack - $30 passenger side rear hatch glass - $50 dash - $50 carpet (minus hatch area) - $15 headliner - $15 visors - $5ea rear seats (top section only) - $40 steering wheel (with radio controls) no centre - $40 auto shifter - $25 wiper and indicator stalk assemblies - $30ea front & rear seat belts - $30ea (or the lot for $120) front driveshafts (drivers side needs repair) - $30 front AWD knuckles - $30ea ABS unit - $30 front X-member - $30 rad overflow bottle (good condition) - $25 UNIVERSAL 5x114.3 space saver spares - $25ea floor mats - $5 set I'm chasing the following parts (trade for above with cash either way) bosch 040 (or equivelent) fuel pump fixed back racing seat (medium or large) 180sx stock front bar injectors to suit sr20det (other then factory s13) 17x8/9 5x114.3 skid rims 215/45/17 tyres r33 turbo front brake disks R33/r34/s14/s15/c34stagea rear adjustable toe arms R33/r34/s14/s15/c34stagea rear adjustable camber arms

Got a heap of parts in the shed i need to clear out S13/180SX - STOCK stock front pipe - $30 stock dump pipe with oxy sensor - $50 4 stud hubs with good bearings - $10ea sr turbo front brakes with disks and pads - $100 Hicas power steering resivour with level sensor - $50 Hicas subframe with all Hicas lines, senders, lower control arms, disks & knuckles - $150 AC condensor with lines - $30 AC compressor with idler and brackets - $50 R180 diff (suit 5x1 half shafts) - $100 half shafts (5x1) - $50ea interior fan and heater core - $15 AC interor core - $15 hicas PS pump - $50 T25 turbo on standard manifold - $150 clutch fan shroud - $35 stock intercooler with piping & BOV - $50 charcol canister - $5 standard suspension arms - $20ea most interior parts available AFTERMARKET Blitz aluminium mandrel bent piping to suit front mount - $150 3" front dump pipe (mandrel bent, mild steel) with oxy sensor - $50 C34 STAGEA wrecking a c34 stagea (no gbx, motor, suspension or brakes), if any parts u want aren't listed let me know as i probably have it interor fan with heater core - $15 AC interior core - $15 front seats - $50ea door shells - $30ea rear hatch shell - $40 roof rack - $30 passenger side rear hatch glass - $50 dash - $50 carpet (minus hatch area) - $15 headliner - $15 visors - $5ea rear seats (top section only) - $40 steering wheel (with radio controls) no centre - $40 auto shifter - $25 wiper and indicator stalk assemblies - $30ea front & rear seat belts - $30ea (or the lot for $120) front driveshafts (drivers side needs repair) - $30 front AWD knuckles - $30ea ABS unit - $30 front X-member - $30 rad overflow bottle (good condition) - $25 UNIVERSAL 5x114.3 space saver spares - $25ea floor mats - $5 set I'm chasing the following parts (trade for above with cash either way) bosch 040 (or equivelent) fuel pump fixed back racing seat (medium or large) 180sx stock front bar injectors to suit sr20det (other then factory s13) 17x8/9 5x114.3 skid rims 215/45/17 tyres r33 turbo front brake disks R33/r34/s14/s15/c34stagea rear adjustable toe arms R33/r34/s14/s15/c34stagea rear adjustable camber arms

Can anyone confirm that the gktech weld in plates will/won't fit?

Hey Guys, After months of racing with a slight bend in my 180sx's rear subframe i have finally found an auto a stagea one to put into it (more track). My questions are; Why it's out of the car are there any known weak points of the subframe (or LCA's) that i should weld some bracing onto? Any parts i should re-build/replace? It will have new rose jointed adjustable suspension arms (or second hand if anyone has some...) and will replace any bushes that are worn. Should also hopefully have my rebuilt 2-way finished soon to go in it. oh and will also be using solid offset bushes to fit it in I'm buying a rolling shell for it and a few other nice bits and pieces so if anyone is after something let me know as i may have the part

anyone know the answer? Have a S1 RB25de with spun bottom end bearing and looking at putting S2 long motor in

After a working RB25DE long motor prefer S1 R33, needs to be running.

Got a R33 you may be keen on. http://www.skylinesaustralia.com/forums/topic/369903-r33-for-sale-sa/page__p__5895632#entry5895632 3k without the gearbox, it also has coil overs now. open to offers

After a RB25de (pref series 1) Intercooler core around 75x600x300 prefer with 60-70mm outlet/inlet. cheers Luke