wpnsx

Hi all, Aquired a few of these bad boys a year or so ago and am selling one at the moment. In Very good condition. Working with TWO working sensors. The harness is a shorter one with the sensor cable about 1.8m in length. Looking for around $600ono if I can sell within Australia. These retail for $1500US with one sensor, then sensors are $400 each. http://img252.images...2/imgp1822b.jpg I doubt anyone on here will know what this actually is but it is an OEM quality wideband oxygen setup made in the states. Australia's equivilent would be an Autronic B model analyzer or Motec PLM. The best tuning shops in the states utilize these units with their Dyno's and charge accordingly. This link to the product's details on the manufacturers site. Ive tried both ways to get the photos on there but I doubt it will work. http://www.ecm-co.co...oduct.asp?a1000 I have sold one of these units already through ebay to a guy back in the states (who was very happy with it), however between ebay, paypal and Australias very expensive postal system my revenue was probably down about $150 from where it should be, and now with the Aussie dollar up it would be even worse. So i am just trying here to see if there is any interest locally. Contact me through here or on mobile; 0421 120 235 - Rob. Any questions at all please dont hesitate to ask. cheers,

Hey mate Im chasing a Rear number plate light?

On the subject of dicking around with connectors... what is peoples opinions of using second hand connectors from wreckers, but taking the contacts out, getting old wires out as best you can, soldering new wires to the wire crimp area, then re-crimping the insulation crimp on the new wire?Bit long winded in the end there. But you get the idea. Ive been doing this a bit cause I hate the look of joined wires. Seems the best is purely crimped on connectors, but a couple of oem yazaki connectors i have pulled apart lately have been crimped and soldered.Thoughts anyone?

Found this one also. http://www.gtr.co.uk/forum/142215-aftermarket-wiring-harnesses.html

http://webbersrbguide.com/index.php?option=com_content&view=article&id=83:nissan-wiring-connectors&catid=45:wiring-electrical-a-ecu&Itemid=23 Nuf said.

hey mate do you have the big rubber boot thing that goes around the shifter and seals the body?

Bump.

I had a quick look at the window seals then. There is one at the back which looks like it forms into the door seal itself. and also one at the front (next to mirror). These are both there and seem in decent condition. If you give me a photo of what your after I can confirm further? Cheers, Robbie

Do you still have the tailshaft? If so can you give me a price posted to 3096. Cheers,

Hey mate could you do the clutch posted to 3096 for $200. (tried to PM you but wouldnt let me. Cheers, Robbie

Could you do the OEM flywheel posted to 3096 for $60? Also do you have the flywheel bolts?

Gearbox Mount, Clutch and Flywheel?

Do you have the clutch, clutch slave, flywheel and flywheel bolts? If so how much?

Hey mate how much for shipping of the flywheel to 3096 (Vic), cheers.

Les, Both window have the little vertical scratches that you generally get from the outside rubber getting bits of dust in it, but no major scratches. Also so you know they have some type of tint on them. As for the price how does $40 sound? Side mirrors - $50 for the pair Seal - Hrmm, are you talking one inside the door or the one on the B pillar, If there is one inside the door it may be there. The one on the pillar no. If yous want any photos let me know. Cheers, Robbie