Nosure

Hi mate do you know what the size of your turbo's vband inlet size?

R34 gtr nur Rb28 Poncam 260 valve spring gtx3582 0.82 ts t3 4inch front pipe 3.5inch catback 1650cc injectors 650awhp @ 28psi 500hp on 5000 rpm

I got gtx3582 gen2 0.83 a/r ts t3 in r34gtr dyno on 4th gear. Also plumb back 3.5 inch exhaust. made 650awhp(480kw) @28psi. Response not that good on the graph but I still have 3500rpm power band, and tuner did not touch the cam gear yet. hope I can get better response after adjust the cam gear. I feel not laggy on road. But definitely laggy than my old gtx3576. With 1.01 a/r rear housing and more boost it should be over 750hp on all 4.

Garrett turbo bag, used $70

I dyno test both screamer and plumb back wastegate pipe. made no different on power. One key point is plumb back the waste gate pipe far away from turbo. good luck:)

i got 470kw with 3.5 cat and 3.5 cat back, also wastegate pipe plumb back before cat. Legal：) but my front pipe is 4 inch.

Update 1 New Radium High volume external pump surge tank. $600 2. New JMS FUELMAX single pm2000 40A (boost up voltage from 14v-20v adjustable and ramp in function, active when boost or 5v, much better than kennebell bap) $500 3. Aeroflow push lock fitting from 6an to 12an. Enough build one whole car fuel system with surge tank. And a lot other fittings ( orb fitting, hard line fittings, npt fittings) 4. Tomei type A valve springs for rb26 (only test fit. $80 5. R34 gtr cas used good condition $180 6. New turbosmart 1200 fuel reg v2 ( waiting turbosmart send back). $200

I used have gtx3576 gen1 with rb26. It spool 600 rpm early than my 3582 gen2 with 2.8. If no one interest my 3582 I will set the 8700rpm limiter. Then I should still have same power band as 3576.

I have the 610hp one. Will post it later

Car made 540hp awhp on 24psi e85 0.83ar 610hp awhp on 26psi. E85 (2 more psi = 60hp) 0.83ar I think it will make 650+hp on 28psi. Or 700+ on 30psi. It's a happy turbo if go north of 25psi Let me know if someone interest it.

Id1300 Magnafuel pump and filter sold.

EOI: gtx3582 gen2 I have the gtx3582 gen2 on my car for 1200kms. I want a little more response so I might change to Gtx3576 gen2. if someone interest my 3582 gen2, pm me please. Price will be around 2300 and you can have any size of rear housing because I will keep the old housing and buy a 3576 gen2 with the rear housing you want.(they only sale a kit, no supercore) locate Gold Coast.

A lot parts still for sale. 1. New Magnafuel pump mp4303 (good for 750hp e85 single pump continue duty. Flow about 500lph at 70psi) $600,new filter suit the pump: $70 2. New Radium High volume external pump surge tank. $600 3. New JMS FUELMAX single pm2000 40A (boost up voltage from 14v-20v adjustable and ramp in function, active when boost or 5v, much better than kennebell bap) $500 4. Near new turbosmart 1200 v2 fuel reg good condition with fittings and gauge. $120 5. A lot New aeroflow fittings (an 6 8 10 12 full flow push on hose end, 8 orb-6 8 10an fittings efi fittings, 5/16,1/2 hard line fittings) want sale as a package. From $100-500. 6. Id1300x e85 injectors 11mm rail. (Can be fit on different rail with different hats) only done 2 dyno run. $1000. Paid 1700 6. Tomei type A valve springs for r34gtr (only test fit. $100

FS: Id1300 injectors Near new condition. Only 2 dyno runs and a few hundreds km on road. Paid: 1760. Sale for $1000

Wtb: Garrett gtx35 rear housing( t3 ts 1.01) Good condition or new. i can also trade my fuel system parts (1000hp surge tank setup) for the housing.

Will swap my parts for garrett gt35 rear housing ( t3 ts 1.01)

1/2 hard line sold.

I also have 2x New aeroflow check valve for Bosch efi pump. $60 both

I don't have enough money for id1700 so I might keep my id1300. ( If I want sale it again I will post up. unless someone want buy my surge tank setup then I can sale the injectors.

If someone want buy as a package I also can put a set near new id1300 for very cheap price.

Fs: Id 1300cc e85 11mm rb26 Less than 600kms. Perfect condition. still on my car, if someone want them I will remove them after 13.02.2017 price:1000 Locate: gold coast

If you find somewhere sale them cheaper I can make it even cheaper But im sure they are cheapest new parts already.

FS: New 1000hp fuel setup. Top brand. And aeroflow fittings 1. New Magnafuel pump mp4303 (good for 750hp e85 single pump continue duty. Flow about 500lph at 70psi) $600,new filter suit the pump: $70 2. New Radium High volume external pump surge tank. $600 3. New JMS FUELMAX single pm2000 40A (boost up voltage from 14v-20v adjustable and ramp in function, active when boost or 5v, much better than kennebell bap) $500 4. Used SARD fuel reg good condition with fittings. $100 5. New Aeroflow Kevlar braided teflon hose -6an 4.5m $220 6. New black hard line 1/2 (12.7mm) $50 7. New aeroflow 400 blue hose -6 an (3/8) 3m. $50 8. A lot New aeroflow fittings (an 6 8 10 12 full flow push on hose end, 8 orb-6 8 10an fittings efi fittings, 5/16,1/2 hard line fittings) want sale as a package. From $100 9. Tomei type A valve springs for rb26 (only test fit. $100 If buy pump, surge tank and fuelmax bap together. I can do a better deal. Or give you the fittings you need for install. And this is 1000hp e85 combination on single pump. One pump= less heat less worries. I change my mind, so no need these parts. They all genuine. Location: gold coast