Jump to content
SAU Community

goldgem

Members
  • Posts

    59
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by goldgem

  1. chasing regested plates, in sa, pm me regards adam
  2. Im chasing anybody thats wrecking any serries r 33 must be in SA in sa, have a few things im after
  3. gtrs are a fair bit different compared to gtst i have done a few gtrs and there is no way to get engine out unless box is out too.
  4. was trying to find out why my engine was missing, wouldnt run over 1000rpm when throttle was opened it would rev lower and pop and carry on but idle ok. did a compression check and 1 and 5 had 50psi im assuming thats enough to say the engine is stuffed?? have not taken an engine out of a r33 gtst before, looking at it, it looks like it will be eaiser to pull engine and box out together? is this possible?? keeping in mind im doing it with a engine crane and car is not on a hoist.
  5. bought an amp, very good comunication, on time and easy meeting, very well advertised item

  6. im chasing bonnet, front guards, rear bumper, headlights, Rh tail lights and afew other bits and peices, dont care what serries or colour. regards adam
  7. bump
  8. Im chasing a bit of a list of r 33 panels must be in black, and located in SA I need a bonnet, lh, rh front guards, rear bumper, headlights and spoiler im also after a few other small things trim bits and stuff like that. Not fussed if its serries 1,2 or 3 im looking for cheaper stuff too so hope theres someone wrecking a black 33 out there. in sa.
  9. sent a pm about fuel flap
  10. bump
  11. bump
  12. bump
  13. bump
  14. thanks mate will keep that in mind be more so looking for stuff in SA
  15. Im chasing a bit of a list of r 33 panels must be in black, and located in SA I need a bonnet, lh, rh front guards, rear bumper, headlights and spoiler im also after a few other small things trim bits and stuff like that. Not fussed if its serries 1,2 or 3 im looking for cheaper stuff too so hope theres someone wrecking a black 33 out there. in sa.
  16. what colour was the car?? im after some black panels
  17. cool thats what i wanted to know. thanks heaps
  18. I just put a high mount manifold on my r 33 and wanting to put a standard turbo on but the lines dont line up, seems the middle part of the turbo and the exhaust housing are about 90 degrees out, was wonering if i can myself undo the bolts holding the centre to the exhaust manifold myself and rotate it to line up everything up and do the bolts back up. is it that simple?? regards adam
  19. Big turbo high rise custom manifold, ceramic coated braided lines hks intercooler Autoronic mafless ecu[map sensor] extreme ceramic clutch custom wiring loom turbosmart BOV Gready boost controller high and low setting turbosmart turbo timer apexi rsm hks 3inch dump pipe and exhaust upgraded injectors and fuel rail upgraded high pressure/flow external fuel pump apexi rising rate fuel pressure reg cold air intake system and pod filter fresh engine, gearbox and diff,[lsd] no bearing noise chromes and polished rocket covers, inlet manifold intercooler pipes, strut brase turbo compressor housing All servicing is up to date ie, cambelt water pump, all fluids ect 400r gtr front bar, side skirts and rear pods, all in fresh paint with no scratches, body in perfect condition no major dents or scratches. fully adjustable front and rear JAC coilovers, strut brase satin black allloy wheels no gutter rash, 265 rear tyres 235 fronts, no body rub. 15inch pioneers subs colour matched to body, twin kenwood amps, pioneer front splits, pioneed 6X9s and twin face pioneer deck 2 way alarm with 5km range and 2 remotes car has been regularly serviced everything works perfectly, nothing leaks oil. body has a good shine bars and skirts have just been painted, engine bay is detailed and tidy as photo shows. Interior has been colour matched to body white handbrake and gearshift boots, nissan floormats. new dash mounted boost guage. Dark tinted windows. Everything in the car is colour matched, tidy and in good condition. I have dyno papers to prove power. Not inerested in swaps so please dont ask. Car has never had any police atention while I have been driving, does not need any work, just needs to be driven away. If i do not answer my phone during work hours leave a message and I will call you back. No joy riders or time wasters Selling due to family prioraties, very regretfull Im chasing the $15000 mark call 0402504049 feel free to leave a message if i dont answer.
  20. bump
  21. im hunting for some r 33 rear bumper pods with the part that goes around the rear bumper as well as the sides not overly fussed about colour or condition would prefer in sa as postage will be a bit I think. I think they came standard on gtr v specs if that helps.
  22. have done a bit if internet searching but have only found a kit in usa and not australia. Im looking for a diy kit to ceramic coat my exhaust manifold. not to keen on paying for getting it done proffesionly as its very costly, anybody know of any kits available. regards adam, goldgem
  23. as stated im after a standard r33 gtst boost controll solenoid and the indicators that go in the front bumper i have a non matching pair and prefferebly after the type with just the indercator and blank clear bit not the spot light type. regards adam
×
×
  • Create New...