DrifteR33

Ok I've figured it out... The Line from the Actuator and the line from the Hks Wastegate both run to the Rear of the Intake plenum. (on seperate lines of course.) So I've left the Wastegate line alone, cut the Acutator line and plugged the end running for the Plenum, then I've installed a smell Tubbing nipple before the throtle body (i.e in between the after market intercooler and the inlet manifold, not between the pipe from the Turbo to ic, this makes alot of difference.) then run the T-Piece in between that outlet and the actuator, then that vents off to the in cabin BC.

Can someone please help me, I have bought a new incabin Boost Controller made by Turbosmart, I was going to install it to find, the stock Solenoid controller had already been removed by the previouse owner, the car has an after market Intercooler and a HKS Sequential Wastegate installed on the pipe between the Turbo and the Intercooler, the hosing coming out of the Actuater on the Turbo runs out of it then back up into the Plenum then the hosing from the HKS Wastegate runs back up into the Plenum as well, where do I install the Tee Piece, I'm so lost and the only intructions I have are the one for if I still had the factory Solenoid still installed, so now I'm pretty lost... ???