Jump to content
SAU Community

rbr31andrew

Members
  • Posts

    84
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by rbr31andrew

  1. I full set of Brand new RB30 Spool Conrods $750 Delivered
  2. Have a few parts that are up for sale.. Used Set of Wiseco forged pistons, rings and gudgen pins. .020" oversized. Have done 50KM only, removed due to bearing issues. All pistons are in good condition and still have the dry lubed skirts intact! $500 for the Kit in original packaging Genuine Nissan RB25 oil pump, Bought new from Nissan. Has had very little use. $250 ACL Race series MLS Headgasket 1.3mm (.051" thickness) $150 Pictures available on request!
  3. I also have for sale... 2 x Proflow Billet 30micron inline Fuel filters with -6 male ends $40 Posted For the Pair!
  4. There top feed. You would need a aftermarket rail to suit. Siemens Racing Injector, designed for Aftermarket Performance Applications Suitable for 175HP per injector in Non-Turbo Applications Suitable for 139HP per injector for Turbo and Supercharged Applications 83 lb/hr (890cc/min) 14mm O'Ring Low Impedance (2.2ohms) Uses Bosch Style Square Connector (EV1) Also Suitable for Alcohol (Methanol) Price is per injector Siemens Part # FI11405 (old P/N 3105) (Commonly known as Siemens 83's) All tests run with n-Heptane (0.6855g/mL) @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar) (43.5PSI) , 14VDC (+/-0.05VDC), peak/hold driver. Gas (0.735g/mL) ratings converted at a 1.035:1 ratio. Static Flow Rate: 83.2 lb/hr = 10.87g/s = 888 cc/min (+-/ 4%) Dynamic Flow Rate 2.5ms PW @ 100Hz: 19.5mg/pulse (+/-4%) Coil Resistance: 2.35 Ohms / Low Impedance / Low-Z (Peak/Hold driver circuit required) Spray Pattern: Pencil Connector: Minitimer (Bosch EV1)
  5. Set of 6 x Siemens 890cc EV1 injectors. 14mm o'ring, will suit a large range of applications! Brand new injectors! $400 Posted. PM me if you are interested or email me at [email protected]
  6. Hey, PM sent, Have made you an offer
  7. AS title says, I'm after a complete R33 GTS-T 5spd gearbox in good condition. (Including release fork assembly, neutral/reverse switches, speedo sender and shifter all still fitted) Please PM me or email me at ([email protected])
  8. Surge Tank still up for grabs! $100 New Genuine Series 3 R31 In tank pump - $Open to offers RB30 Sump and Turbo fittings still for sale!
  9. Hey, I have for sale.... 1 x Genuine speedflow 1/8NPT to -04 oil feed fitting for turbo. Originally came off a Garrett GT35R $10 1 x T3 Oil Drain flange including mounting bolts - suits 19mm ID hose. This also was fitted to a Garrett GT35R. $30 1 x Nissan RB30 Sump - Good condition, no dents! $50 1 x Alloy 2L surge tank with 4 hose tails (3 x 8mm and 1 x 10mm) + Bosch 044 fuel pump bracket Complete assembly, Brand new hasn't been used! $100 ( It is the Square surge Tank assembly in picture ) New genuine Series 3 R31 Skyline intank fuel pump open to - $Offers I can post all parts Australia wide! Feel free to contact me at [email protected] or PM me for details...
  10. sounds good, looking forward to the dyno print out
  11. Oh right, thanks for that. I guess its more exciting to drive with the t04Z then the GT35? whats it like to drive?
  12. Have you had it on the dyno with the New T04Z .84??
  13. Hey I have a quick tech question someone may be able to help me with. In regards to preparing RB30 Crankshafts. I noticed a lot of people talk about grub screwing the crank (Screw in oil gallery plugs fitted) Where are these located on the crank and what is involved? I have a crank here and I'm going to take it to a local machinist to have some similar work done and there but there not what you would call a ' performance' shop but they do good quality work. If I have a rough idea of what is involved and the location it would make it easier to explain it to them if they are not 100% sure. A close up picture if available of the finished product would be helpful. Thanks for your time; any help will be much appreciated!
  14. Excellent Gauge, As new condition! $50! Can post Australia Wide...
×
×
  • Create New...