willyr33

Pics?

I,ve had a Jim Berry(Race Clutch) single plate for some time now,never had any drama,s holding 270rwkw. I had him build it to hold over 300rwkw,(400rwhp)which is not too far away now. Only had to adjust linkages above the pedal.Soft feel just like a standard clutch. Jim knows his stuff! Cost was somewhere around $600-800 i think?

Has anyone had anything to do with Kelford Cams? I was wondering if someone has tried them in their RB,s specifically in a RB25. What sort of profile etc etc I am considering them in my RB25 if i could find out if others are happy with their performance I have been advised to go 256 in and 264 ex. My turbo is a Garrett GT30, rated 600Hp, not sure of wheel and trim specs, Ex .82 housing Any feed back from these forums relating to Kelford cams would be appricated thanks Cheers Willyson

YOU HAVE pm

Would you know if the mirrors for a 2 door r34 fit a 4 door r34?? I,m wondering if the rake angle would be the same at the front of the door/ front window???

There are a couple of different types of eyelids around,do you have some pics,and where are you located

I understand that the only ceramic coating for turbo manifolds is the Black stuff (extreme coat),as the alloy looking ceramic can,t handle the excessive temps,and after awhile cracks and flakes off.Also the black coating is much more exspensive. Try High Perfomance Coatings. www.hpcoatings.com.au

Need a reply from my pm thanks

Hi I,m wondering if anyone out there could help me out with this one, i,d like to get my RB25 head CNC ported as i,m told the results are better than the manual modifcations. Were to find a machining shop that does this in the Brisbane area or NSW has me stumped. If anyone can help me out,suggest somewhere, i would appreciate it thanks Willy

Slapper: I,ve spoken to John at JHH, also Bryant Engineering,Rob at Bryant quoted me approx $800-900 for port and polish 50FFT: Do you have a contact number for Mendams? i guess they,d be in the ph book??

Yeah me too Must be somewhere in QLD or NSW? long way to send a head from Nth QLD,cost of frieght will be the anti climax?? Surely someone can help out??

Is someone able to help me out here? I want to get my RB25 head CNC ported can anyone suggest a place ?? preferably in QLD Thanks Willy

I,m wondering who does cnc porting of RB25 heads around the Brisbane area??, Can someone help me out with this, i,d apprieciate it. thanks Willy

Have you got some pics of this setup,manifold and all Did you run this with the .82 housing??,how was it? Interested,without the Microtech