SLY-33

Perfect condition $100 0401 651 796

Up for sale is a 6 point Cusco Safety 21 full roll cage to suit an R32 2 door. Front legs wrap around the dash so no cutting required. There are mounts on the main hoop and rear leg, for the the rear cross bar to make it a 7 point. In excellent condition, just finished sanding it back to paint, but have changed my mind and decided to go weld in now. So it is ready to paint any colour you wish. Comes with all mounting plates, high tensile bolts etc. After $800 Contact me on 0401 651 796

What spring rates?

Hey mate call me on 0401 651 796, very keen also in Melb. Cheers.

Mars bar in batter?

PCD 5x114.3 Front: 17 x 8 +35 Bridgestone B500si 225/45/17 tyres, about 2-3mm of tread, camber wear on inside. Just above rwc indicators. Rear: 17 x 9 +38 1x Bridgestone Potenza 255/40/17, about 5-6mm of tread, sidewall has a groove worn into it from scrubbing on the gaurd, but nothing to worry about. Pretty even tread wear. Well above rwc indicators. 1x Khumo Ecsta 255/40/17, also about 5-6mm of tread, pretty even tread wear and well above rwc indicators. Contact Matt on 0401 651 796.

Motor sold. RB20 Yellow Jacket Coilpacks still for sale - $250

Gearbox sold. Motor still available, $1000 or $1200 with yellow jacket coilpacks.

If you will take $400 I will take them both off your hands. I'm close to Preston, can pickup asap. Cheers.

Forgot to mention the motor comes with the complete wiring loom. Also have yellow jacket coilpacks which I can throw in for a bit extra.

Pulled the RB20DET motor & manual box out of my 32 gtst. Motor & box have only travelled 130,000k's. Both in excellent condition. Came out of a bone stock 32, still running the standard exhaust, side mount cooler and standard boost. Compression tested the motor before I pulled it out. All on video. Results were as follows: CYL 1 - 160 psi CYL 2 - 160 psi CYL 3 - 162 psi CYL 4 - 167 psi CYL 5 - 160 psi CYL 6 - 165 psi Only selling as no longer needed and need to raise funds for my RB30DET project. Can supply videos of compression test to serious buyers. Price is $1,500. Located in Melbourne Northern Suburbs. Contact Matt on 0401 651 796 for more info.

How much for postage to Melbourne? Cheers.

What size gate does the manifold suit? Also how much for postage to Melbourne? Cheers.

Hey mate are they straight and free of dints? If so will you take $300 for both cash on pickup? Cheers.

Computer sold. Injectors sold, pending payment.

Hi, up for sale is a Microtech LT-12 with a plug & play loom for an RB25. It came out of an R33 gts-t. $1,000 I also have a fresh set of RB25 740cc hiflow injectors. They have been ultrasonically cleaned, flow tested and received new seals, caps etc. Have not been used since being hiflowed, as you can see from the picture. They are lubricated, sealed and ready to be installed. $400 I will take $1,300 for both. Open to reasonable offers. Located in Melbourne. Pickup or post is fine. Contact Matt on 0401 651 796. Cheers.

I added 2 x 1.1mm shims to the existing 0.8 shim and was shocked to only see it single during it's first set of donuts

I have a welded R33 GTS-T Diff, which I was planning on using for drifting. I ended up getting a 2 way so this is no longer needed. Just been sitting in the garage taking up space, so it's time to go. Cheap alternative if you can't afford a 2 way. $150 come take it. Located in Mill Park, Melbourne. Contact me on 0401 651 796.

Hey mate my number is 0401 651 796, let me know when I can get them off you. Cheers.

$50 for the rear shocks and springs? When you driving up to East Melbourne next?

1993 S1 R33 Gts-t. 129,xxx km’s Timing belt changed at 100,000km 2 Pak respray was just done 2 way sunroof Tinted windows Viper remote start alarm HKS Turbo Timer Drift Boost Gauge Kenwood MP3 head unit 6” Alpine front splits 6” Focal rear coaxials 4 gauge 2 amplifier wiring kit fitted, including 3 RCA cables (All ran to the boot) Genuine Trust No-holes front mount intercooler with 3 inch piping (No holes cut in the chassis) 3” Turbo back mandrel bent exhaust with 3” high flow cat & stainless steel split dump pipe Splitfire coilpacks Turbotech boost controller (Running 9-10 psi) Pedders heavy duty front & rear sway bars Front & rear strut braces Cusco adjustable pillow ball tension rods Rear subframe uras pineapples Hicas lock bar 11 months registration $12,000 Either PM me or contact me on 0401 651 796.

Up for sale is a locked diff (spider gears have been welded together) to suit a series 2 R33 Gts-t. I bought this the other day intending to fit it to my series 1, but I didn't realise the stub axles were different until my diff was out Tried swapping the axles around but there different lengths. So now I have no need for this and am just going to weld my one. Chasing $250 ono. Contact me on 0401 651 796.

ITEM: Series 1 R33 Gts-t T28 & standard dump pipe LOCATED: Melbourne, Northern Suburbs CONDITION: I haven't used this turbo hence the price, but seems to be in good condition. There is minimal shaft play. PRICE: $150 CONTACT: Pm me or add msn [email protected]

Sorry not sure. I just purchased the car and the wheels came with it.

Will you take $150, can pickup asap. PM me.