sriver killer

pm sent

hey mate interested in your mounts, what condition are they in? what do you want for the pair

sold

bump. make an offer

hey guys, Ive got a pair of front nismo adjustable damper shocks and springs (5 adjustments from hard to soft, adjustable from strut top) and a pair of rear standard shocks with aftermarket japanese springs in them i am after $200 bux for the four, give a nice firm ride height, the fronts stiffen right up boots are worn still work awesome 0411 353 493

Hey guys, I have a damaged r33 trial bar in white, comes with indicators, good for someone who wants to repair or needs a bar to get around with. asking $150 for the bar. the indicators are worth that 0411 353 493

anyone want to come with me for a drag with saturday night? or maybe next weekend?

helpful yes, my clutch failed and they failed to accept responsibility then they beated around the bush trying to point the blame on contamination bah, i just went to another clutch joint. dime a dozen

gl with it i got turned away from npc today with the worst customer service hope your clutch goes better than mine

mobil 2000 15W 40 semi synthetic ($40 at autobarn) daily driver/ nite time thrasher 140 thousand kms and still got 155-160ish across all six yay!

Hey guys, i've got a cusco billet lightened flywheel, its in awesome nic, no wear on it haven;t even had it in the car for that long. only been on the car for six months, can get it machined if needed i can sms pics if needed, will post will fit any rb20/rb25/rb26 http://www.priceme.co.nz/Cusco-Lightened-F...-883157283.aspx same as that one, works really well when on asking $300 for it located brisbane south may trade for other r33 bits cheers

Hey guys, i've got a cusco billet lightened flywheel, its in awesome nic, no wear on it haven;t even had it in the car for that long. only been on the car for six months, can get it machined if needed i can sms pics if needed, will post will fit any rb20/rb25/rb26 http://www.priceme.co.nz/Cusco-Lightened-F...-883157283.aspx same as that one, works really well when on asking $300 for it located brisbane south cheers

yer i tried dmd, they supply but don't paint and fit, i haven;t tried camerons body works yet, everyone i talk to says that they expensive, i am yet to call tho i have seen their work, it looks good

hey guys. just looking for opinions of places that have you have bought fibreglass front bars from, or that have painted your car?(yes i have already searched) i was looking at getting a gtr style front bar from a place called aj's, its the bodykit place opposite autobarn moss street i've rang around alot the the round the town place for a gtr style bar is 400-550, plus fitting and painting, which is normally about 300. taking just the total cost of about $700-850 just to get a front bar painted and fitted, where have you guys got your gear from, had any cheaper places where you got your stuff done at? what about the quality of the work? i don't mind forking out for a quality job, i'm just sketchy about a couple of the places that i have tried. where have you guys got your bars from? painted and fitted?

hey guys got an rb25det with a seized camshaft the bottom end is still fine has no manifolds or ancillaries, bare long motor pm me for my number if interested $350 located brisbane south near springwood

hey guys got an rb25det with a seized camshaft the bottom end is still fine has no manifolds or ancillaries, bare long motor pm me for my number if interested $350 located brisbane south near springwood

i'm still getting 460- 480 kms to the bottom quarter mark on the fuel gauge, which from memory is about 38 ish L i picked up heaps extra kms going back to standard wheels. picked up an extra 60 kms per tank going from 245 50 (?) 18's on the rear to 225 50 16's

i ended up buying the sr na highflows, worked out fine for me so far xd

would you recommend carmate? i want to buy a gtr style bar, how did you find the fitting of your bar?

i just made 241 rwkw @15 psi(spikes 18 then eases to 15) 3071r IW nissan t3 style 6 bolt dump rb25, stock manifolds. 3inch exhaust fmic 600cc inj nistune z32 afm does that sound about normal?

i get roughly 9.5 ish L per hundred kms, half highway half start stop on the highway i can knock it down to just under 8L per 100 kms thats what i had when i got the car, still getting the same right now with 3071r, 620 cc highflow injectors, and 250 rwkw. but when i put my foot down---------> =[

i played around with this on my r33. ran alrite, but under load used to stutter real hard. i guess the afm's don;t really like it. i just put the afm back where it was, cause thats where its meant to be

hey guys. i am halfway thru swapping turbos over. just wondering bout making a home made oil cooler setup. wud it work by taking the oil from oil sender. running it thru a small cooler and run the return into my turbo oil drain pipe. wud this work? safe idea?

that ebay kit seems to be the go.anyone tried them? crap quality? do yo need a restrictor in the oil feed? the current lines that i have for the turbo ( damaged) seem to be the same inside diameter as standard. they don't have an oil restrictor are the stock water lines the right size aswell ( inside diameter). . cause i might cut my standard water feed, and hose clamp the braided turbo lines that i already have to the cut water feed. tapping it wouldn;t be to bad tao do you do any oil and water line kits? cheers

hey guys got a rb25det. about to reove my standard turbo and put a 3071r on. just a couple of questions, i have an oil line made up for the oil feed for the turbo. it does't have a restrictor in it. is this alrite? i was told that 3071r's have in built in oil restrictors. . what about the size of the oil feed line? as for the water lines, i was thinking of cutting the standard water lines and barbing the ends of them. and running braided hoses clamped to the original lines for the turbo. are the inside diameters of the standard water lines good enough for cooling a 3071r/ cheers