pedro skyline

Ok i will try that tomorow. This is new for me. I Never Done it before.

It is just to know how far down does the stopper goes

By the way i saw in this fórum http://forums.nicoclub.com/how-to-degree-your-rbxx-aftermarket-cams-t425466.html

So if i rotate the engine to the 0° tdc i do then install my piston stoper? I read a posting just now and there explains how to do. But my issue was that i didn't know how to install the stoper And how long it should be. Then my other issue is Wen do i install the stoper, cause if i install it when the engine and shafts are align with marks on tdc i cannot rotate the engine can i? Cheers

The dials indicators i am waighting for it. I bought one on ebay

I have only the dials that come with the camshaft in paper

Hi there do someone knows how to degree tomei poncam on r33gts-t s2 rb25det motor? And by the way how far/long has the piston stoper should go? Thanks to all

Here is a bit dificult to find a tuner that can tune an apexi pfc d-jetro. There are many that are specialized in AEM or HALTECK. But i will folow your advice and try to find one. Cause the car idles very bad and the fuel mixture is way far to rich. Thanks mate for the advice

Hi there. I have a r33 gts t s2 whith rb25det from 1996. I bought a top feed injectors rail front facing plenum and 90mm throtle body. The injectors are make jecs and thei are orange color is like to be rated at 850cc. I want to know how do i calculate the latency maths to ad them to my pfc d-jetro. My mods are Pfc d-jetro late model with commander Top feed injectors Large fuel rail Front facing plenum with 90mm throtle body Tomei poncams Big valves Big ar70 topmounted turbo Forged engine internals Light fly wheel and clutch heavy duty 3"exhaust from turbo backwards. My car has a unstable idle too much fuel not burn coming out from the exhaust, hi rpm on idle like 1500 to 2000 rpm. I need to take the car to tuner but it canot drive with crap idle. Thanks for reading my post. Sorry about my wrighting iam portugese.

Hi there mates. I have an issue whith my r33 s2 tps sensor. I folowed the many topics that have here wroten but no answer. I turn my key to on position, and then use a multimeter and turn to dc voltage and tri the signal wire that is the center one blue and red wire. And it shows like 2.94v. That is the minimum voltage that i can get and at WOT it shows 4.96v some times 5v. I have a 90mm throtle bodi mounted on a front facing plenum. Can anione help me with this issue please. I tryed nearly everything, i got a power fc new model D-Jetro

Thanks. Was the seller that didnt send all together. Problem solved By the way the bar is the strut mounted in boot hold from one strut tower to the other strut tower. Thanks

Hi there mates. I have an issue whith my r33 s2 tps sensor. I folowed the many topics that have here wroten but no answer. I turn my key to on position, and then use a multimeter and turn to dc voltage and tri the signal wire that is the center one blue and red wire. And it shows like 2.94v. That is the minimum voltage that i can get and at WOT it shows 4.96v some times 5v. I have a 90mm throtle bodi mounted on a front facing plenum. Can anione help me with this issue please. I tryed nearly everything, i got a power fc new model D-Jetro

Hi there someone knows were to buy a the 2 black holders for holding the bar to the rear struts towers? I have bought one on ebay but i have been tricked and the seller said it is sold only the bar cause the 2 black metal holders comes whith the car. Any help will be much apreciated thanks

can some one help me, cause i bought a super afc apexi from a seller in japan but i tried every thing to find the help on the installation and i cant find. there is help for safc 1 and 2 whith monitor, but my one is older than that, is the one with 5 turning buttons marked each one with 800 , 2400 , 4000 , 5600 , 7200. and have 6 wires 1 black, 1 red, 1 blue, 1 green, 1 white and one yellow. if anyone can help me with this i will appreciate thanks

hy guys can u pls tell me where to find the ecu on the r33 gts t ?? thanks

hi guys do anyone know how to access the skyline r33 gts t ecu???