SRP
Members-
Posts
54 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by SRP
-
OK, last Christmas I had some B-stock Haltech gear offered to me cheap, well, now its the end of the financial year and Haltech want to clear the last of the stock before the next batch arrives in July. So, I have some awesome deals I can offer. There is only limited stock and once it runs out, thats it. E8 with plug and play loom is normally $1800 brand new and air temp sensor and map sensor are around $130 bringing total kit price to just over $1900 I can sell E8 with plug and play loom, map sensor and air temp sensor for $1250 plus freight E11 with plug and play loom, air temp sensor and 3 bar map sensor is normally $2630 brand new. I can sell for $1550. Limited stock on these. People who bought them in December can vouch for payment and delivery being all good. Terms are direct depoist or cash and then it gets sent out. Simple really. If your interested, email me at [email protected]
-
Hey guys I was at Haltech the other day and they've offered me a bunch of B-Stock Haltechs that an be sold at a good price so I thought id pass the deal on. Basically B-Stock are ECUs that have a small scratch or mark on them but have nothing wrong with them inside and are brand new. I looked at them and cant see much to tell you the truth. Out of 18 on the list, 15 or so have been deemed fine to go back to A stock but they're still gonna let me buy them at B-stock price until Christmas when they are returned to A stock. OK. E8 with plug and play loom is normally $1800 plus air temp sensor and map sensor is $130 I can sell whole lot for $1250 plus delivery E11v2 is normally $2300 plus air temp sensor and map sensor is $130 I can sell whole lot for $1550 plus freight Have plug and play loom for R32 -R34 GTS-t and GTR If your interested email me [email protected] Deal lasts until Christmas or until stock gone. already sold 6 units in last couple of days.
-
Seems as you cant get a drive of one in Austarlia, I got to drive one for 2 days in the US and do a full review on the new GTR compared to the R34. Its a feature we produced for DSport DVD in the US. Probably show the feature here in Australia too. Faultless car but compared to modified R34 and Silvias it gets pretty boring. faultless but soulless
-
Hey guys here is the offical trailer to the new extreme sports drifting tv show we just finished filming. The website will be online next week and the show airs at the end of the year on Fuel TV. Will also be doing DVD box set once it airs. enjoy http://www.youtube.com/watch?v=wJeJK0hkysQ
-
OK AVS Model 5 style rims for sale. I've had them for 3 years, not sure what brand but they're not overly heavy and seem pretty good. Just had them re-sprayed, although its not the best paint job ever but better than scratched and gutter rashed. They are 18x8 and 18x9 5x114.3. Not sure of exact offset but fit R32, R33, R34, S14, S15, Z32 no problem. ( clears front brakes) I'm supplying with the wheels and brand new set of Toyo Proxes 4 235/40/18s. They are completely brand new. Have not ben driven on and still have the sticker on the tread. The tyres and re-spray on the rims owes me $1100. Located in Sydney, will take nearest offer. Can courier through work account for free. email if serious [email protected]
-
my drift car isnt underpowered, its over gripped!!! Its going back for full tune this Saturday and gets cams next Saturday
-
the guy that started this thread now thinks everyone else is being stupid and wants the thread locked? This is so typical of a forum. On another note. I had Jim tune my drift car last night and he once again provedwhat a guru he is. The guy has more talent than anyone here will ever know. Fernando Weirhl drove the car and was shocked at how well it drove. its not jsut how much power you make but how you make it.
-
Im slightly concerned that you started a post with "please don't reccommend CRD, you must be kidding" but you obviously ahvnt been there and are responding to " my mate's mate's mate said this" its alos pretty rude to slander online. dont see Croydon starting threads about how badly you do your job and as you can see there is plenty of people here to defend Jim's tuning
-
Firstly I'm insulted having my car called the Hot4s car as its clearly the Ignition DVD car let me clear something up. my original workshop built that engine and it had ots of problems and drove like crap. when i took it to Croydon is was laggy, crap to drive, revved to 7700 and made less than 290rwkW when it left Croydon it made 340rwkW on pump fuel ( won dyno comp at Final Battle last year to prove it) and it revved to 8800 rpm without breaking rocker arms. It also drove to Newcastle, did 10 dyno runs and drove back on half a tank so off boost driveability and fuel economy was awesome. Basically it went form dog to best car Ive driven so dont use my car as a reason not to take it there when my car is a perfect example of why you should definitely take it there. I've been to a few workshops and seen a lot of other peoples work in my travels and Jim is the only person Ill take my 200SX to. Period.
-
OK Ignition skipped a month with HPI and Hot4s. edition 031 and 032 still to come out with HPI and Hot4s. edition 033 is the first issue where we are back on our own again at newsagents. The trailer shows that the DVD will be available from JB HiFi, Ezy DVD, Autobarn, Supercheap and you can buy it online thorugh our online store. www.ignitiondvd.com Will have it on sale at Autosalon too.
-
thats cos your hectic Paul lol go TWOOGLE !!!! your feature is in the DSport DVD in the US in September too
-
it will be available online in 10 days and at stores in 3 weeks. wont be sold at Newsagents due to a lisencing deal with a diributer
-
I know some people dont like the Ignition Bling but this will change your mind about our DVDs
-
video speaks for itself http://www.youtube.com/watch?v=urloQ98C-ME
-
on the run with higher mph they upped boost a little bit more. If that launch had been spot on, it would have run a 10. They'll get there soon enough.
-
I was down at Gas Motorsport today for some closed door dyno testing. Haltech have their R35 GTR running o their Platinum series ECU ( available later in the year) Its a prototype set-up and they are still ironing some bugs out but so far doing well. They replaced the centre muffler and cat with straight through pipe but it made no difference to power. Also tried removing the rear muffler. This also made no tangible difference. But upping boost to 15psi and doping some fine tuning meant power went from 2987kW stock to 356kW at the wheels. Not bad huh Will be at Compak Attak tomorrow. [mod edit: Edited thread title to include drag results]
-
You will all think im nuts, and so do I, for selling these rims but I have my reasons. OK, they are: 18x9-inch +11 offset front 18x11-inch +11 rear They are Face 2 and are gunmetal grey. Also includes centre caps and wheel nuts ( which cost over $500) They fit under +20mm front guards no problem and are a tight fit ( need stretch tyres) under +50mm rear guards on S14 I had them ordered brand new and cost me ( yes i paid for them out of my own pocket in cash) $3850 Many of you are fmailiar with the retail price which is over $4500 for just the wheels. Im selling with teh Toyo T1Rs that are on them which would normally cost over $1400, so this package has a retail value of nearly $6000 and a "good price" of just under $5000 The T1Rs are 235/40/18 and 265/35/18. These tyres have done less than 2000km so about 80-90% front and 70% rear. Im asking $3500 plus freight. They are in perfect condition and are the hottest rims known to man. IM in no hurry so no stupid offers. [email protected]
-
Hey guys. We're holding a monster Industry and Christmas party on Thursday 20th December at NOX nightclub. We've hired it out so its for the automotive industry only. All of the top workshops, manufacturers and journalist for the industry will be. It's a chance for car owenrs in the scene to leave their cars at home and come and socilaise Hot4s will have girls and I'll be hosting the night along with our new host Renee. We'll be giving free DVDs to everyone who comes in and hot4s will be giving mags out as well. WE'll aslo be filming the night and hot4s will be taking photos Lets make it big and finish the year on a high. See you there
-
Ignition DVD is offering an exciting opportunity to someone who is looking to make it in the modified car industry. How does meeting Australia’s top car builders, drifters and drivers sound? What about checking out the best events and the hottest models? What about domestic and international travel? Sound to good to be true? Read on. We are currently looking to employ someone to train as a Production Assistant with on going training for other potential positions including field producer and producer. The job is demanding but rewarding and is the perfect way into the modified car industry with all the training and experience you will ever need as a journalist and media producer. No official experience is necessary and money can’t buy the on-the-job training you will receive. So if you think you’ve got the skills, are motivated and know your cars, then read on. JOB DESCRIPTION: As Production Assistant you will assist the Producer and Production Manager in the production of Ignition DVD. Your main role will be to help produce the features in the DVD while assisting with general production in the office including database and stock management. You will liase with clients, workshops and car owners to help arrange shoot dates and locations. You will also attend various shoots to act as assistant Field Producer. On going training will be provided and if the candidate is suitable, the opportunity to move into a Field Producer or Producer role will be provided. Some travel will be included with the chance of regular travel in the future. Salary is to be negotiated based on skill level, experience and qualifications. The opportunities are endless within the Infinity Entertainment organization. QUALIFICATION REQUIREMENTS. No official qualifications are required although some will be considered an advantage such as: -Media or Journalism courses or degree - Mechanical apprenticeship The main priority is to have a strong knowledge of import cars, the import modified car scene and it’s different cultures. Car knowledge is essential for script writing, field producing and helping editors with features. A strong car knowledge will also help when liasing with car and workshop owners. English and grammar is as high a priority as a professional and motivated attitude. We are seeking someone who wishes to help the product excel and move forward into the future. This job is the ultimate opportunity into the modified car industry. Must be: Over 18 years of age Passed secondary school Be an Australian Resident or Citizen Be able to hold a valid passport Have a current drivers licence Reside in Sydney NSW Be able to work nights and weekends when required APPLICATION PROCESS All applicants are to submit a resume and cover letter to: [email protected] Applicants who meet the initial criteria will then be sent a “application pack” to assess the candidates suitability for the job before progressing to the interview stage. For more information contact [email protected] or ring Andrew on 0422 043 555.
-
Wrecking R33gtst 4door 5spd Man
SRP replied to s14force's topic in For Sale (Private Car Parts and Accessories)
hey PM sent about getting some stuff of it -
Hi guys Ignition DVD is shooting a hotspot segment in Sydney this weekend for our July edition. Well be there with out Host Darren, our STi project car and film crew. We'll be giving out Ignition DVD's to everyone there and also giving out stickers and scouting for feature cars. The meet point is Bunnings Yennora carpark at 7.30-8pm From there we'll be cruising to Newport adn tehn another location. See you all there