nicr4wks

Ang's Audio Shop 354 North East Road Klemzig SA 5087 Phone: (08) 8266 3188 [email protected]

Heres my air bag init from NDS, not sure of the read or clear code commands as they're behind the gui. Send FF FF DC (100ms pause between commands) Receives 00 00 23 ^ Works on my 33 And the SHICAS SENDING: FF DELAYING: 100 mS SENDING: FF DELAYING: 100 mS SENDING: E4 DELAYING: 100 mS RECEIVED: 00 00 1B INITIALIZE OK ... After that I believe it starts probing for sensors and fails: SENDING: 5A DELAYING: 25 mS RECEIVED: A5 SENDING: 00 DELAYING: 25 mS RECEIVED: FE REGISTER 00 ... INVALID SENDING: 30 (STOP) RECEIVED: CF This goes through 00 to 06. So assuming E4 is the actual HICAS system we just need to find the correct sensor addresses? Edit:: looking at the commands pdf linked earlier, "9F stream all sensors" might give an interesting output, ill give it a shot when its not so dark and cold >.> And when looking for 01 on the hicas ecu it returns valid, this is only the speed sensor though.

Airbag errors wont show up in the main ECU I've found, I'll give datascan a go as it's successfully been able to read bag codes on my 33 hopefully the 34 isn't too different. Did you happen to give any of the reset procedures a go? There's a few guides floating around the forums where you turn your key and push the door switch several times which works for some people. The datascan software states SHICAS which I'm guessing might have a different instruction set or initialisation string to HICAS, would be great to get some real time info displayed.

What software was used and what was tried? Make sure I'm not gonna go ahead and try the same thing dohmar did

At which stage are you getting an error? Check all of your file paths in the setup.

systems and network admin here too Was searching around today and found a couple docs of interest: http://vacated.net/carstuff/Generic_Nissan...table_Ver_2.pdf http://www.plmsdevelopments.com/images_ms/...nds_Issue_6.pdf Could get fairly annoying needing the car on to test all this out.. Perhaps we should take this to a global forum for more input? I believe the creator of Nissan Data Scan hangs around the ACT forums. Problem being a lot of these guys sell their own software and don't want to give away the secrets!

And I'd like to try it on a 33 plz ^-^ So no one has ever been able to make the HICAS speak? Wonder if chucking some commands to it over a terminal might get something from it instead of relying on other peoples software, need to find and initialize it first tho....

Nissan Data Scan will enter the airbag in to diagnostic mode and read/clear error codes, at launch you can select between AT/SHICAS/AC/SRS etc then scan the bus for the device and connect, on my 33 I can bring up main and air bag. SHICAS will connect but the sensors between hicas and shicas must be different as I can't get readings. conZult lists plain old HICAS support but I've only got the trial version and it isn't enabled Also thres one for mac, ConSultan that will let you download fuel maps from your ECU and graphs them out, looks pretty fancy except my usb>serial wont work in osx!.

The software I have has an option to clear air bag codes, I've never had an air bag error to test it though. I'd be willing to give it a shot, Highbury after hours or Frewville during my lunch break, no charges

^ this is what all of the 33 and 34's I've plugged in to have had, supposedly 32's also have the same connector. ^ This is the newer (post 2000?) OBDII interface which is on V35 etc.

I also have a Nissan Consult cable that should work.

I'm planning to go on, will be shit tho as just setting a baseline

Dave, you can download 10gb off the Adam newsgroups every month, which is 10gb you wont have to seed back. Also, don't suppose you've looked in to Adam's Communitynet? www.communitynet.net.au Communitynet being you can download from people on your same exchange for free, won't count toward ANY of your quota, ever, no matter how much you leech.

*plugs antenna back in* Safe to assume an 02 sensor shouldn't be doing that an its probably farked? /noob Thanks!

Anyone know how much work is involved in removing a r33 rear bar? I've had a look from the bottom but can't clearly see any bolts, I'm guessing that maybe the rear pods, garnish etc comes off and there might be some mount points under all that?

Put my first ever mark on the line, I cried.

Someone in a Galant flashed and waved but I was distracted and didnt realise till the last second, on lower north east. Black 34 turning off lower north east. And the BWS guy.

Might be cleaned up by now, was on the corner of Grenfell and King William about 40 minutes ago and didn't notice anything

Any ideas for photo locations? PM'd. IMO somewhere with some greenery could be cool, before summer turns everything brown again.

For those interested in car audio, the guys over at mobileelectronics.com.au have been try to respark the car audio interest in SA and as a result have organised a Sound Off and general car audio meet for SA. At the moment it's scheduled to be held on the 28th November at Ministry of Bass. Original thread is here: http://www.mobileelectronics.com.au/forums...howtopic=552029

Please check your committee email.

I've only bought 2 and they've both been instant, tried rebooting your modem?

I work next door in frewville, never seen your stag or 33 about tho.

Use whatever license is on your current PC, technically not legal but no one will know unless they come and look at both of your PC's. It will update fine and everything. Try some other stores to see if they will sell you OEM licensing.

Black 33 & dark coloured 34 corner of Glynburn & Magill about 5:40 White 33 turning on to hanbledon rd? off newton just before 6pm, realised a the last second and chucked a nod but i think it was too late!