shinobi_s14

Yeah bro, it's as simple as replacing the polariser film. Gotta do the odometer to match this weekend

Not sure if anyone has done this yet but decided I might as well write up a tutorial upon completion of mine Tools needed: 1x small phillips head screwdriver 1x small flat head screwdriver Linear polariser film (preferably with adhesive side, I got mine from http://www.3dlens.com/shop/lcdpolarizer.php) Acetone Scalpel/Razor Procedure: 1. Remove climate control from car. 2. Remove the temperature knob along with the nut behind it 3. Remove the 4 screws holding the front half of the unit to the back half 4. Using the flat head undo the 4 clips, and the front part should pop off 5. Undo the the 2 screws holding the back circuit boar, then push on the part where the plug goes to slide it out 6. Undo the 4 screws holding the front circuit board to the face 7. You should be able to pop the circuit board out now 8. Now comes the tricky part, using a scalpel slowly try and peel back the existing polarising film. Easiest to work from the corner and slowly sliding the scalpel along the glass 9. If there's adhesive residue left over on the screen, then use acetone to remove it 10. Time to apply the polarising film, if you place it the correct way it should look normal (white backlight with black writing), but if you turn it 90 degress, it'll reverse the colours 11. Once your happy with it, cut the film to size and apply to the LCD screen 12. Reassemble the climate control unit and reinstall into car, now you should have something that looks like this

Looks like this person may have used an extension kit similar to the one JSAI sell for the GTT

Is this pick up only? Or are you willing to packed it and freight it interstate as well?

Darwin NT mate

Stock r34 op6 (suits rebuild) and stock manifold Can post at buyers expense $300 ono

Another shot from this afternoon

A sneak peek at today's photoshoot https://www.facebook.com/BenHarmsenPhotography

That's a ballsy move

Awesome ride. Saw this a TL's the other day. Should go for a cruise sometime

Bahah yeah I really needed to realign the rear bumper but haven't had much free time lately

It's kind of a DIY job fellas. Got the LED ones off eBay (they're the same ones that daniels14a posted earlier) and then just heated them up removed the plastic covers and switched them with the OEM ones, sealed them back up. Done! I'm happy with how they turned out

Just passing through and leaving a pic of my LED tail lights

Anyone got photos of this lip on a 34?

Fair enough bro. Can't wait to see them fitted to the car! Good work

Its coming together nicely. Should paint the whole headlight to get rid of that chrome surround around the projector

Hmm maybe try a lighter colour like a turquoise or something. The headlights are all finished and on my car now and work a treat. Light output is so much better! Yeah the paint is still fine. Just make sure it's high temp that you paint it with. My projectors are mounted a little further back so the shroud can sit flush with the reflector. And cause of that the only light that you see is the light coming out of the projector. I'll try get EvoXenon in on here so he can share some of his insight

I reckon for a classier look, try going white projectors bro, looks a treat on white cars also Here's some that Steve (Evoxenon) did on a CZ4A

Cause I already had them on the car and I couldn't find any halogen ones at the time. Plus I like the parker lights on the xenon ones as well

Can anyme confirm that the 32 and 33 N1 vents are different? It looks like the 32 ones might have a slight bend in it whereas the 33 ones are straight? And if possible anyone know the sizes of them? I wanna put them in my 34 bumper just not sure if they'll fit or not

Thanks a lot guys. I might hunt for some genuine ones and Anthony my car is the white that the 34's came in (QM1 I think it was)

Hey guys, just wondering if anyone knew where I could get my hands on a pair of N1 slots. Thanks, John

A few photos of the retrofit my friend did on my ER34 xenon headlights Here's the link to the build thread of them: http://www.skylinesaustralia.com/forums/topic/417403-custom-er34-bnr34-hid-headlights/

EvoXenoN currently taking orders now guys https://www.facebook.com/pages/Evoxenon-Custom-Headlights/295138580609204

So many nice examples here!