stealth-ish

Just out of interest (for S2 AWD models) has anyone tried El Grand front rotors? From the measurements I've found for the TE 52 these should in theory work? 290mm Diameter 28mm Thickness 49.2mm 68mm centre

That would be me!

Yellow C34 in Geelong? I actually see you every couple of days as you drive past my work.

Ok I've just read this entire thread and I'm probably more confused than when I first started... I have a manual RS4S (series 2) with BC coilovers. At the moment I have Enkei NT03M 18 x 9.5 +27 (with 15mm spacers in the rear; so +12) Tyres are 235 45...AND I still scrub on the coilover in the rear. Going straight is fine, it's mainly bumps, hard corners and heavy offloading onto the back (front is fine) SSOOO...I'm look at getting some new wheels. 18 x 10, what are people's opinions on offset to sit at least flush with the guard? Just looking at opinions as I have found a couple of pretty low offset wheels... Thanks for any help in advance! - stix

Have a read through Build Thread: Adam's Nissan Stagea C34 It will answer some questions regarding a manual conversion as well as all the differences and work involved. The time, effort and detail he has put into the thread is really impressive.

I'm not too sure I can help you with everything but what varient of c34 have you got? I had major issues with 18x9.5 +27 on my manual with coilovers. I've had to put 15mm spacers on the back to just get it moving, it scraps on the inside when the attesa kicks in or when the weight shifts onto one of the back corners heavily. If it's noisey after the vehicle has stopped I'd once again look at the attesa, there is also a fluid reservoir in the back behind one of the removable panels that i'd check levels of

I'd never turbo an N/A motor. Don't get me wrong, you can do it, but it won't be long before something goes pop If you want boost, do an engine conversion. If you want something different and don't need your car reliable for several months, go charged Otherwise you could stroke it?

[vic] spotted dark silver C34 at Winton yesterday...the one time we don't take mine

2nd suits me, I'll catch you guys near geelong

hey sorry i didn't want to rebump the thread but this is long gone

These puppies, fixed back bucket and three people

Hi all, After stripping out the one of the project cars need to start clearing some space. We do have some other interior bits and pieces also but just putting this up for now. ITEM: 6 point roll cage to suit A31 Cerfiro. This is a non sunroof - around dash type This comes bolts and plates to go straight in CONDITION: Good, few scratches on the paint PRICE: $500 LOCATION: Geelong, VIC. Prefer pickup only. If you want post you are to organise courier as too big for auspost. I am on here regularly so please PM PICTURES: Loosing put together:

glad i could help

If you are not too sure better to spend less cash and get it looking a little nicer while you make up your mind. Although most member seem to have stock grills so I'd keep yours Heres the front of mine with the series two grill if you want to know exactly what yours would look like

holy cow, the exterior of your stagea is almost my twin! (except wheels and grill) welcome and hope you enjoy your stay