G3TR4G

Who were these sold to? I need to track some down

For sale 114.3 work meister s1r mbl made in Japan in July, 1,500 Km's old Not a mark or scratch on them Aggressive fitment for gtrs No longer needed ***Tyres not included*** http://www.gumtree.com.au/s-ad/st-marys/wheels-tyres-rims/work-meister-s1r-s-19-x-10-5-8/1008080450#

still for sale???

its ok guys i was missing a diagram that explained it all

anyone know how to fill in one of these? i have the alcon 365mm brake kit on front and 33mm alcon rear brake kit? Brake caliper FRONT REAR A mm A mm B mm B mm C mm C mm D mm D mm K mm K mm L mm L mm M mm M mm A X factor (max. caliper protrusion) B highest point of caliper (min. radius) C highest point of caliper (max. radius) D widest point of caliper (max. radius) K The upper of between inclination start and end L The lower of between inclination start and end M lowest point of caliper Car center hub FRONT REAR E mm E mm CAR F mm F mm G mm G mm MODEL H mm H mm TYPE J mm J mm R mm R mm YEAR E Diameter center bore F Diameter hub PCD G Height center bore H Height hub J Total Height car hub R Radius center bore (chamfer) COMPANY NAME NAME DATE TEL NO.

Awesome day guys... First of many I hope

i havent driven a lap of mallala with the new setup... tomorrow should be fun

yea think this may have been me.. lack of memory but i was in the city sunday night

power enterprises 800cc injectors X6 to suite RB26 Brand new still in a box (i ended up fitting 1000cc instead) $790 ono im in adelaide and can post aus wide regards luke

ross pwr steering under drive pulley (for better steering feel) also stop the belt from jumping at higher rpms (rb26's are prone to) tomei oil pump tomei sump baffle plate acl race bearings i also have the original bonnet... might sell this seperately if anyone is interested??? also have about 50ish photos of the rebuild. spent well over 100 hours labour getting the motor to perfection. "the quietest rebuilt and forged 26 i have ever heard" ...brett. from graham west workshops that tuned it.

few days too late

hey mate yes i am interested in this car and i have an r34 gtr that i am trying to sell or swap for an evo 8 mr http://www.skylinesaustralia.com/forums/topic/376232-r34-gtr-for-sale/

also has apexi power fc just runs a T piece bleed valve to keep it looking standard 1265nm torque atw ported and high flowed head done by hanlon race engineering splitfire coilpacks many other things i may have for gotten

62,000kms engine has been fully rebuilt 12,00kms ago (including gearbox rebuild) car has following nismo parts, LMGT4 10.5 +15 x 18 320km dash rear camber arms super coppermix twin plate (new plates 12,000kms ago) carbon pillar ganishes weldina 3" cat back (and stainless after market larger front pipe wheel arch lips (not fitted to vehicle) carbon (nismo style) bonnet smoked indicators front and side Air Flow meters gearbox and engine mounts intank fuel pump fuel pressure regulator engine; garrett -5 turbos... serviced and checked out of vehicle 12,00 kms ago fully balanced with ross balancer, CP pistons, eagle rods and nismo twin plate hks cam gears (duralumin) tomei type B poncams 260 deg tomei valve springs new valve guides arp main studs, girdle bolts bosch 1000cc injectors hks engine oil cooler kit head oil restrictors nitto 1.5mm head gasket 8.46:1 comp ratio cams have been dialed in to comply with tomei cam specs further mods; alcon 365mm front brakes (6 pot) sheerly awesome alcon 335mm rear bkakes (4 pot) zeale function coilovers jvc entertainment unit dvd/mp3/bluetooth 350awkw on a very healthy 22psi on 98octane... injectors are running 72% duty at this power very capable of pushing 400awkw if desired this car has been my pride and joy (very honestly a regretful sale) i am in no rush to sell but i am at a point in my life where i would like to buy into a business... car is immaculate on the inside and has 1 very small dent above the rear left guard (can only be seen on an angle) and the rear bar has a small paint chip that has been touched up but still visable all modifications have been made in a way that you can feel safe to pop the bonnet infront of a fellow officer... the engine bay looks practically stock minus the painted cam covers and tomei valley placard. $69,500 or near offer... all serious offers considered also i will be buying a car around the 25-35k mark a swap plus cash will be considered evo 8 MR preferably pm for details and please be patient as i only check the site maybe 2-3 times a week.. regards luke

interested.. has it sold yet?

ive got all the goodies inside forged and now its time to fit it back into the 34 i just got my 26 rebuilt by miltons and now i need to know where to get it tuned? they recommended graham west? wat about willal or john keen? POWER FC and nismo afm's.. suspecting around the 400 mark has 2560-5's what injectors would be recommended for that power also???

if ur still looking i maybe selling my getrag 6 speed from my 34, so i can then buy a blown one and put ppg dog set in it... i dont know a price at the moment... but the box is mechannicaly sound! i may even keep mine if i could just find the power rating of the standard getrag... if anyone knows?... im runnin about 400awkw so im thinkin it might not cope?