Sparky206

Thanks for the replies,Not too worried on looks, much more interested in just replacing 20 year old hoses. Theres 14 piece ebay kits that look very convienient for $80, just wanting to double check that Im not getting myself some dodgy hoses that are likely to burst

I am looking to replace all of the coolant and heater hoses on my Rb35det R33 and was wondering what everyone was using these days. Theres a few threads from 5 years ago with all the nissan part numbers for about $430 worth of hoses, but now theres a couple of silicone hose kits on ebay and just jap and was seeing if anyones had any experience with either of them. Cheers

Would love to know who the person was who asked to stick their go-pro on my car with about 15mins left in the day and got a recording of my last run. I was the silver R33 with the chrome lip'd 18's who had a passenger most of the day.

Engine had been on its way out for a while, its just going to be parted out to another project car then scrapped so further damage was not a concern

The hilux had a 1G-GTE in it, he would not be happy to have someone say its an rb . It defiantly spun a bearing, then threw a rod on the way home about 2km out and had the crank vibrating so much it was moving the clutch pedal inside the car. Made it home to his street then died an honorable death and hadto be pushed into the driveway.

sent in forms and payment for me and a mate, which also means the POS white trayback ute from this time last year will be returning for some laughs

Cant download the forms, im just getting a "opps something went wrong" page on both links on the original post

Heres my result with a r33 highflow i had done a few years back, just running 14psi off the actuator. 263KW

End up getting those times transcribed?

2nd hand hose for sure! That hose from nissan is $400

Yes because the airflow through the AFM isnt going to be consistant. If your right on the edge, which you are running 11psi, sometimes you'll trigger it and sometimes you wont

Your just hitting Rich and Retard. Search the forums for it. Trying to run anything other than stock on a r33 is just a waste of time, the ECU's absolutely hate it when they see anything their not expecting. Whats happening is your hitting the limit of how much air the ECU wants to see going through the engine. When it sees this, it pulls all timing until its corrected. Thats why it'll feel like you hit a flat spot in the rev range. If your running 11psi you could try dropping it to 9 or 10 if your JUST hitting it occasionally, but either just run it stock or get a nistune and avoid all these hassles

Not a bad car either....

I've been searching around for a boost leak for a while now, causing slow spooling and general lack of power. I've pressurized up the intake to about 12psi and found a few small leaks but nothing major. If i pressurize to 12psi, it will slowly drop about 1psi every 10 secs till about 4 psi, then it will take longer. I can hear some air flowing somewhere around the head. Sounded very much like it was coming from the spark plugs, so i checked them and 2 bubbled a bit of water, but a little tighening and it stopped. The noise is still there, most prominent if i put my ear around the spark plug valley, but still very hard to get a direction on it. Im almost certain no more hoses are leaking, so where else could i be loosing pressure? Thanks

Sent payment through for 2 first timers, me and bbtr, will send through forms tonight