Aza82

Hey are these still available? My number is 041697348. Cheers

Hi just after r33 ignition barrel and key. And if possible door and boot locks too. My number is 0416971348 Cheers Aaron

Hey mate just after a crank angle sensor, how much including post to Lismore 2480?

Hey 'm fter the cas sensor.

Hey all, I have been doing up my r33 that I bought with a dead motor. Someone had wound out the boost and cracked every pistons ring lands (not pretty). Since purchacing the car I have donethe following: - forged CP Pistons - Forged Eagle rods - Acl race bearings (main and rod) - Commetic MSL Head gasket - Greadyyle plenum - 80mm throtle body - Front Mount Intercooler - Gates timing belt - top mount turbo set up (t3/t4 rated to 600hp) - light weight flywheel + HD clutch - Custom turbo dumppipe - 3" from ump to cat, 3.25"-3.75" cat back with 4.5" tip Okay now I have followed he workshop manual throughout the process and now it is time to start the rb for the first time I have no spark (so no go). I have gotten an auto electrician over to look at it and he confirmed there was no power to the coils, and at this point my battery was flat and we couldn't try out his bypass set up. Since then ( three weeks ago) he has said he wes comming over again but has been a no show. CAN ANYONE GIVE ME THE NUMBER OF A GOOD AUTO ELECTRICIAN THAT WILL DO CALL OUTS IN TH LISMORE NSW AREA! I just want to get mast on the road Any advice or help would be much apprecieated.

Hi there, was after a pasenger side window. If ya got it still how much posted to Lismore 2480? Cheers Aaron.

Hi I am building up a rb25det. I want 400hp at about 18-20 psi with min lag. It will have - ACL racs series bearings (main and rod) - ACL forged pistons - ACL full gasket kit with MLS head gasket - Gready forward plenum - Top mount exturnal wastegate - Thinking 555cc top feed injectors + fuel rail to suit (not sure if size will be enough for 400hp) - 3" exhaust - 600x400x75 fmic - Computer system ??? (been told the VN comodore computer is vertually the same as a Mo-Tech, could be a cheap option) - Turbo ????? I have seen a turbo with specs - ball bearing - Turbine Housing: A/R .68 - Turbine Wheel: Trim - 75 Major -2.52" Exducer 2.28" - Compressor Housing: A/R .70 Inlet 4" outlet 2.5" - Compressor Wheel: Trim 60-1 Major 3" Inducer 2.36" - Flange t3 (same as stock turbo) Can anyone tell me if this turbo will do what I want? Any usfull info/guidence would be appreciated.

Five!

Four!

Three!

Two!

One!

i like skylines but if you need to do work on it strait up to fix the misfire don't bother. isn't that what you didn't want to do?

good link mate interesting.

it should just fit. you can get the whole kit if you want to make it look like an r33 gtr

Hey i am building an r33 up for street use though but really i am just posting to get my post no.s up so I can reply to a pm.wtf?

thisle if you read this yes but i can"t reply to your message becouse admin won't allow it something about not enough post or something

If anyone has a cracked head or just has these lying around I am after the cam caps and baffle plates from a rb25det head. I am in Lismore NSW. Cheers people.

Hi all, I am after the cam caps and baffle plates from a rb25det head. If anyone has a buggered head and has no need for them or you just have a spare set by any chance and can fix me up for a decent price ie $10-20 or something give me a buzz. Cheers Aza