sweefu

R33 rears fit S13 Not fronts, you can only put S13 front hubs on an R31 not rear. If you want 5 stud on your R31, do s13 front end with alloy hubs, or s14 front end, then fill/redrill your rear axles and use R32 rear discs.

Ah I see, thank you for your help. Yep, car is 95% track, or if it's not on the track it's in the mountains anyway. What about QFM A1RM?

Are Ferodo DS2500 still a good pad for a track oriented car? They seem to have a good heat range, my car is used for drifting mainly with a hydraulic handbrake, but the car still gets driven on the street (to/from track) and some mountain driving / general track (grip) days.

Not exactly the right area, but.. Does anyone know where I can get a replacement wheel stud for a bolt on spacer? I've stripped one on my spacer, standard s13 studs don't fit Any ideas? Thanks

No R33 hubs will fit.

If you want 5 stud + upgraded front brakes You could do s13/s14 front suspension conversion, LCA/hub/knuckle/brakes etc. This allows you to run R32/R33/R34/S14/S15 calipers For 5 stud, you could run some aftermarket alloy 5 stud hubs if you're using s13 gear, or s14 is already 5 stud. For rear, you need to get your axles filled/redrilled 5 stud, then use R32/R33/R34/S14/S15 or redrill your standard rotors. All of this info is over at R31 Club forum / wiki. Lots of people have done RB25 conversions, you're best to go to R31 Club.

Sorry, I can't help unless you have a 15amp outlet in your garage..

Can you still drive the car?

Who's heading out tonight?

For sale: Standard RB20 Turbo - reasonable condition, some shaft play but still usable $50 T04e dump pipe flange + gasket (suit eBay turbo KLS Power Spirit, maybe others) $25 S13 front hubs, appear to be good condition, missing 4 wheel studs $40 Monza catch can, 1 litre, comes with fittings and hose brand new $30

Part: Standard RB20 turbo Condition: Has some shaft play, still in usable condition (I have never used it though) Description: Standard RB20 turbo, came with a dump/front pipe I bought. Has some shaft play but I think it should still be fine for a bit of use Location: Canberra Contact Details: Here or 0401 785 535 Asking Price: $50 Pick-up/Postage Arrangements: Happy to post, courier shouldn't cost much as it's quite small _______________________________________________________________________________________________________________________________________________ Part: eBay spec T04e dump pipe flange + gasket Condition: Brand new unused Description: I bought this when I was going to run an eBay tubo (KLS Power Spirit) - should fit others of similar specification I think, 5 bolt of this shape. Comes with gasket. Location: Canberra Contact Details: Here or 0401 785 535 Asking Price: $29 delivered ($50 RRP) Pick-up/Postage Arrangements: Postage included in sale price, or local pickup is fine also _______________________________________________________________________________________________________________________________________________ Part: S13 Silvia Front Hubs Condition: Used, missing 4 wheel studs, bearings appear to spin freely by hand Description: S13 Silvia front hubs, I bought these when I was doing my front end conversion and ended up with 2 sets. They appear to be in good condition, I stole 4 wheel studs out of one of them. The bearings spin freely by hand, I've put some grease on them while they've been in storage. I haven't used them in car so can't guarantee if they are good or not. Location: Canberra Contact Details: Here or 0401 785 535 Asking Price: $40 Pick-up/Postage Arrangements: Happy to post, courier wouldn't be too expensive _______________________________________________________________________________________________________________________________________________ Part: Monza Catch Can Condition: Brand new, unused though box has been opened Description: Monza Catch Can, 1 litre capacity. It's new and comes with all the fittings/hose etc though I have opened the box and had a look at it. Location: Canberra Contact Details: Here or 0401 785 535 Asking Price: $35 posted Pick-up/Postage Arrangements: Postage included in sale price

I would just need to organise a trailer and money/a job

I'll be there in my Brolina representing Mobile Electronics Australia

I think if both the pumps are Hicas it's ok?

Does anyone have a car trailer? I need to borrow one for October 11th - October 15th Happy to pay cash / beers / erotic favours.

Yeah I've been wanting to get there for a while, this 2 day event sounds like it would be great fun. Just need to try and find a trailer to borrow.

Would anyone be keen on heading up for this? It's about a 9ish hour drive to Raleigh, I will be going to Sydney on the Thursday, then head up north to Port Maquarie / possibly to Raleigh (If camping is available Friday night) on the Friday. Pretty cheap for 2 days of drift, it looks like a really fun track.

I went to Woden Tyre and Exhaust in June, they were great and not over the top.

This. I don't enjoy pulling out gearbox at home.

My boss asked me to come into work for an hour at 10am, left work after 5pm lol

I spotted an S1 R33 2 door on the parkway, around 5pm maybe? Appeared to have a cut out/grey front bar, car itself was black. Tried to race me it seemed, or do a burnout or something weird..

And hopefully we don't have a heap of 20" Dolce wheels showing up.

I agree, avoid BAS and any employment/GST stuff, really not needed unless you're turning a good profit.

Would you sell the multistud pair by themselves?

I don't think so, unless you are contracting for someone else (bigger company with ABN etc) Those are more for tradies working on various worksites etc