so after about two years of sitting i fired up the old girl and she idles for a while then just shuts off, starts again then just stops again,. she has near new plugs, new coils and new fuel pump. any ideas?
cheers Rob
hi guys,
Just need a couple of points cleared up please. Replacing a walbro gss294 with a walbro gss342
1- do I need to cut the bottom off the cradle and attach using a hose clamp?
2- do I bother with the foam sleeve?
3- The old pump had wire with "spade" connectors on which clipped to + and - of the pump will this be fine to use instead of the supplied clip and then soldering the wires together?
cheers Rob
Hi guys, just bought a wallbro gs342 to replace my wallbro gss294 and need clarification on a couple of points.
1- as the bottoms of the pumps are different do I just cut off the bottom of the cradle and hose clamp the pump in place?
2- the old pump didn't use the supplied wire and clip it just has fittings on the end of the wires attached to the cradle, this will be ok to use?
3- do you bother with the foam sleeve provided?
cheers Rob
Hi guys,
Does anyone know where to get coil packs from to suit a 92 r32 rb20det? I prefer to buy over the counter but I only want cheaper ones I don't want to spend $5-600 on splitfire and the like. I'm in Brisbane and online purchase is ok to
Thanks Rob
hey, my r32 gtst has wobble in the rear end on the highway. It feels like the rear steering is free. Can I lock hicas? and how to do it?Can I buy a Kit? any help or thoughts?