PLYNX

Im afraid Im out as well ! $%&%en work called me in early this morning.

I got the exedy 5 puck. It bights hard and I love it. The pucks are usually cintered ceamic bronze. The 8 puck is a fantastic buy from bigsully84 and is more streetable. Its swings and roundabouts. I went for the 5 puck cause the pucks are riveted on and( as far as I can remember ) are cheaper to change when they wear out . The 8 puck are bonded and are a bit more involved to reco.

Might be a good idea to check if your clutch pedal box aint broken. It happened to mine with a couple of the spot welds on one side of the bracket failing

Bahahahah ! Smoky you were there about three weeks ago with me and ZEDDUDEette dropping off my spare shifter to brizzi. What a cool run out from the west . Bring on the Putty Road this saturday and probably Wisemans on the 9th as well !

Got a just about complete silver top turbo top end, red top as well, And a brand new unused bare turbo head .

Thanks guys ! That would be great if I could track them down.

Hey guys Im trying to chase down Zeni Tani. Specifically some body kit parts (rear flares for my r33 gtst) or where they got them from. Any help would be great. Thanks

Hi all, I was reading through High Performance Imports #64 and I came across the SAU QLD cruise with a R33 GTST with licence plates GAZ-99, what I wanted to know is where can I get the rear flares that sit along the rear guards from? or if the owner could PM me with some details, thanks in advance dudes.

By "engine brackets" do you mean the brackets that bolt to the engine block and the engine mounts ? If so I got a pair

Hows that suspension running Dude ?

Cool Dude ! if you have any other pics of the front brace can you send then to [email protected]. Thanks again

"Chromed front sway bar" Dont you mean strut bar/brace ??? If so Im interested. What brand is it and do you have any other pics ? Where abouts are you located ? Thanks

I got a brand new head gasket and and intakeplenm gasket that came out of a VRS kit that I didnt use. PM me

Is there fluid coming out anywhere ? Is the new clutch a heavy duty unit ? Cause if it is the extra pressure plate pressure might of busted your clutch pedal box. You'll have to get underneath where the pedals are and check

Yep ! There both pressure packs. I use Holts Dupli-color Auto Spray Plastic primer ( its clear ) and K+H Surface technologies Engine Enamel 300 degrees C. in matt black.

Ha Ha ! Ive done several of these now and got a couple waiting to be finished off and painted. I found the best way to do it is to just carefully scrape off the soft coating with a lable scraper, stanley blade and then go over it with scotch brite to get into all the nooks and crannies. Its time consuming but worth it with the scotch brite. Then I sand the whole thing down with some very fine wet and dry sand paper and water to get rid of any nicks or scratches. Then I wipe it down with metholated spirits and apply two coats of plastic primer and then two coats of matt black high temp engine enamel. The last one I did for a mate I also filled in the blanked off hole next to the air con sensor vent and also filled in the coin holder next to the side mirror adjster. Came up a treat.

Im after a very small boost gauge to fit in a small spot. From memory I think HKS put out a very small one ( feel free to correct me on that one ) Might of been about 30mm or so in diameter Thanks Guys

Bin givin away brand new original reproduction ones since no one was interested in buyin em. Exactally the same as the original except they dont wear out. Your welcome to one if you pick up the postage. Where are you at ?

Are the caster rods bushed type (like the originsals) or rod end type ?????

Yep ! Got a brand new head gasket, plenm to runner gasket and water pump gasket from a kit that I didnt use. Oh and Im in Sydney if you wanna pick up !

As the above states Thanks Guys

Where abouts areyou ? State etc.

Im after a working cd player (CV 703) out of 93 GTST as mines kapoot ! Already posted in the wanted section thought Id try here as well Thanks guys

Dude ! Glad your ok. Went through something similar about a month ago sitting at an intersection waiting to turn right was hit head on by a Porsch running a red trying to avoid hitting a van doing a u turn at the lights ! Ambo, intesive care the works ! Concrete medium strip got him airbourne on impact, spun 180 and smashed into the back of my line above the rear right wheel ! So I know what youve gone through and as long as your ok the rest dont mean squat !

PM sent to you kasanoff !