sic33r

Hey everyone just in a pickle could I please get some advice on what to do next so I have a r33 been built/tuned at 1000hp in 2021 and have done approximately 500-1000km. It’s on e85, i went to have a look over it and noticed there is a little bit of oil in the radiator on the weekend… hope I haven’t done a head. car is idling normal and drives fine. Doesn’t over heat,smoke or anything etc. I rang the engine builder but I get the vibe that no matter what it is, they will say “oh we didn’t replace that when we done the build” or something. I could take it back to the workshop but it’s 8 hours away and I’m worried I’m gonna get stuck with the bill, if the motor is stuffed. They did give me 6 month’s warranty but I would of done 200km in that period as it had a few issues at the start.. tps sensor and heat soak etc. am I better off taking my chances and get him to look at it as he built it or am I better off taking it to crd or somewhere and get them to pull it apart and identify what is wrong just incase it is a machining job or something? Cause I doubt an any workshop would actually admit if they bugged something up? Is every workshop like this.. once they build it they don’t wanna be responsible if anything goes wrong at all? I could understand if it was 5000km or something but not 500km? please see attachment of oil in radiator and bleeder tank.. that bleeder tank was making a weird noise early on the scene but I sent it to him and he said it was normal.. is this correct? any info would be much appreciated was gonna flush radiator etc and change oil and re start the car and see if any oil pops up. Is it possible for it to be something small like residue from somewhere off the old build? Used the original cooling system that was on the fir IMG_5239.MOV st build

Yeah I would of thought so too, it’s annoying because I’m getting a ss rebuilt soon and want to use them to tune that as well but have been waiting months just for a print out

Hey. Thanks for the info, that makes sense. The Car got put on a tow truck straight after dyno and delivered to me 8 hours away. Paid for it yes but not in person. yeah it was done on the hub dyno and said that only one person had the password to log in and get it, that person was always busy with tunes. but I think I have managed to find someone to go in there and ask them for it, if so I’ll delete this post once I get the sheet.

You pay for postage and it’s yours. Pm me your address

Ok

Yeah exactly

Done that a million times but nothing yet. I would go in my self but live 8 hours away

Exactly 100 percent

Thanks heaps mate, I will still be waiting by then hahaha. so happy to pay you, let me know how much$ when you get it thank you

🤦‍♂️For when I sell the car. looking on all the forums you post on, you have a chip on your shoulder

Bench racing means nothing to me

I have bolt and washer off old rb30 if you want it

I would do it my self but I live 8 hours away. Car showed up on back of truck with no print out in it

Hey all Got my car tuned at JEM(Sydney)and trying to chase up the paper copy of the dyno result. I am willing to pay Someone cash. To go in there to ask for the print out. Or email tried to get them to email it or send in text but they just keep saying yeah I’ll do it tomorrow. Even offered to pay them just for the bit of paper I don’t care what it cost I just want it. willing to pay $100 or what ever your price is

Thanks, can confirm the Series2 Steering wheel goes on fine. Got rid of the hicas steering angle sensor drive, and slides straight on

My old steering wheel doesn’t have an airbag anyway so I’m not worried about an airbag just wanted to have a better condition steering wheel. can I get rid of the clockspring and put new steering wheel on

Hey everyone. Just trying to install a r33 steering wheel series 2 with airbag on my r33gtst please see photos I go to slide the new wheel on but it’s hitting the plug on the right hand side. Do I have to take that black disc looking thing off or is that series 2 steering wheel not going to fit at all? middle picture is of the series one that came off it.

Hey I have a spare CAS unit if you wanted to borrow or buy

Can anyone at least measure there’s so I could possibly get one made up please

Ok no worries had a look online at the rb26 ones and the arrow is going clockwise not anti close use. ill pm you for price etc if that’s ok?

Thanks for the reply yeah that makes sense, thanks very much. The mechanic made me turn the car off and then put the foot flat and nothing changed still at 0.01v Has a new loom in it. New wires to tps etc see photo. It run sweet on dyno and test drive afterwards. I went to go for first drive yesterday, warmed it up around town then went to give it a bit of a squirt and yeah wouldn’t let me go anything over 3k revs As for the rotation is yours the same in the picture? is so I’ll be keen to buy if your keen to sell.

Thanks very much for the reply its off a r33 gtst rb3026 Drove the car yesterday and it won’t rev past 3k.. on the laptop the tps gauge is not moving at all. Spoke to engine builder he logged on and had a look and said something about 0.01v and it’s not changing or something while driving or anything So just to clarify are you saying that the number is wrong on the back of that sensor in the photo? or that number isn’t a part number it’s just a random number for something else? Does your tps look similar? Same rotation etc? again thanks for the info really appreciate it

Thanks very much for the reply its off a r33 gtst rb3026 Drove the car yesterday and it won’t rev past 3k.. on the laptop the tps gauge is not moving at all. Spoke to engine builder he logged on and had a look and said something about 0.01v and it’s not changing or something while driving or anything So just to clarify are you saying that the number is wrong on the back of that sensor in the photo? or that number isn’t a part number it’s just a random number for something else? Does your tps look similar? Same rotation etc? again thanks for the info really appreciate it

Hey all Have a faulty TPS just wondering does anyone have a spare tps see photo below? tried googling part numbers but I can’t find one with same numbers on it came off a r33 any info would be greatly appreciated..I am in no way a mechanic

Hey all Does anyone have the bit that screws into the dash so the glove box will stay shut, that I can buy.. r33