cthawes

hi im after a right hand unbroken tail light cover for a R34 sedan thanks craig

Hi guys im after a front fog light (gen acc ) for a r34 after it was backed into it while at work pm me here or [email protected] thanks craig

Hi guys im sure this has been done before ?? but if not i was just stuffing around today and found the nissan remote in the pic from patrol , pulsar ect works on the r34 factory keyless entry system there is my 2c im sure this will be cheaper than buying a $350-$400 master key have fun

hi pm replied yes genuine HKS SSQV with the foot mount for rb25

hi guys i have a black ltd hks ssqv bov kit for a rb25 r33 /r34 maybe r32 ?? only used for 5 min ,wife did not end up liking the sound of it on her car im in brisbane pm me here or email [email protected] $350 inc postage < this is just a pic i got off the net to show what the black ones look like

is it 2 door or 4 door ? gear box sold as a kit ??

hay http://gemcuts.com.au/prod274.htm is one place $17 plus shiping maybe a rock hobby store i cant seem to find the web site i got my last lot from

the higher kelvin temperature you go the less light is outputted 4300k is the brightest light all oem hid lights are 35w d2c/s lights are used for projector lights housings d2r lights are used in reflector housing housings ( r34 type ) :note the d2c metal blocking guard

easy job you will need cerium oxide if they are light Scratches, if they can be felt with a fingernail they will need to be ground out with a stone first < i would not do this if you have never done it you will want some cerium oxide powder for the polishing a polishing pad (suggest lambs wool, felt or leather) mounted on a backing disc low speed drill (1500 rpm or less) to use with the polishing pad - polishing too fast will generate excessive heat and may crack the glass. a marking crayon to mark the inside of the glass (use this to guide you when polishing)a cleaning cloth to wipe and allow inspection of the work area small spray bottle - use to apply mixture to glass and keep moist while polishing how to do it Mix some polish into water to a form a thin slurry (eg. milk-like consistency) - we suggest mixing in a small spray bottle which can be used to apply to polishing pad Clean glass thoroughly to remove all traces of dirt and grease Apply polish mixture to the polishing pad Mark the inside of the glass with the crayon to identify the area to be worked Mount pad in the drill and apply to work area. Move pad up and down, left and right in work area. Keep the surface wet to prevent glass getting hot - if sufficient polish has already been applied, then just spray a fine mist of water to keep the area cool. Wipe off residue and inspect repair - keep working until polish is satisfactory Wash and store pad for later use

sorry to steal the thread what about the HKS SSQV3 are they any good ?? thanks

yeah u should be able buy a oil cooler kit form repco auto barn ect i have had a few for supercharged falcons i have had over the years

take off the oil filter , then the shaft that the oil filter screws on to at the base of that thread will be a big nut / or there will be a big allen key head inside the end of the shaft undo it then the cooler will come off

hi guys is there a front Intercooler kit out there for a r34 gtt that can be fitted without having to mod / cut the front end ??? factory gtr one ?? thanks

pm sent

can you put up a pic ?? will you sell them separately??

rear booth ?? boot lid do you mean ?? what colour / spoiler ?? thanks

yeah that maybe a way i just thought someone out there may have done it before i was thinking it would be a case of swaping the parts in the red out of the old dash in to the new or the blue parts out of the new into the old

hay guys this is a question about the nismo 300km dash for the r34 can some one out there confirm if the auto PRND display from a auto dash be fitted to them thanks

any pics ??

hi allan i downloaded the repair manual and it helped me out as nissan dealers are no help it was just a case on pulling the key in and out of the steering lock locking the door pressing buttons ect and it's done

it's not comming from the ABS pump motor is it ?? over on the uper left side ( on a r34 ) then can make a sort of buzzing sound when pumping up

a beaver panel is not some thing you want to use second hand un less there is nothing else out there , due to the fact they are welded / glued on they are not made to come off they should not be much new from nissan ???

hmmm ok so when the car is off pushing the hazard switch makes all of them flash ok ?? and when you turn the car on they stay on ?? do they stay on with the turn switch off or when it is on left or right turn ??

hi there anybody out there got a set of oem hid headlights for a R34 sedan in vgc thanks guys

do they come on when the car is turned on ? or stay on all the time ? is there a afrermarket alarm fitted that is making them come on ?? it could be faulty flasher unit or hazard switch if there is no alarm in the circuit