andyseven

Hi everyone I've changed my number plates and returned NSW 89-GTR to Service NSW. These will be available on My Plates in a day or so. Enjoy Andy

Sold

It looks too high now but they fit, I think I'll roll the guards and drop it down at some point. Sorry for the crap photos and dirty car but at least you get the idea. Sweet

R34 GTR Wheels with Federal SS595 255/35/18s For Sale $1600 ONO R34 GTR Wheels 18x9+30 with Federal SS595 255/35/18s All tyres have heaps of tread left cheek the photo with the key in it - all still have spikes in the edges these haven't been used much at all. All rims have centre caps All have minor tyre fitting marks - nothing too bad - just being honest. One has some minor rash and a scratch - see photo - its not too bad. One has a very small chip its about 3mm MAX - see photo. Other 2 just have fitting marks. These are good used wheels with great near new tyres - just so we are clear they are NOT mint - if your looking for MINT wheels for your show car these are not for you, if your looking for a decent set of R34 GTR wheels for your street or track car BINGO! Sydney Pick Up ONLY - I'll meet you pretty much anywhere East of Penrith, I'm in Kings Cross but have a Station Wagon and am more than happy to drive and meet you somewhere reasonable. Check the photos - All taken 10/11/16 - Off my car (R32GTR) and ready for yours. $1600 ONO Andy 0402 350 827

Finally got around to putting these on my car 17x9+16 with 255/40/17 semi slicks fit with Tein Super Streets wound all the way down. There is only a slight difference in fit to my R34 GTR wheels with 255/35/18s. The look heaps better will post photos after a wash. [emoji106]?[emoji322]

Sold please delete. [emoji322]

Listed on eBay Abbey Road (ARC) Skyline R32 GTR Titanium Front Strut Brace BNR32 Ends Sunday 30th October 20:17 NO RESERVE

Hey Sean I've got a set on my 32GTR currently with Federal 595 255/40/18 with loads of tread all original all complete. Passenger rear has 2cm (max) minor rash the rest are unmarked, this is an easy repair. Let me know and I'll shoot all 4. Whats your budget? Where are you located?

Abbey Road (ARC) R32GTR Titanium Front Strut Brace Abbey Road (ARC) Titanium Front Strut brace for an R32GTR. Name plate needs re-spot welding on one side, easy fix. Aside from that it's in great shape for something thats well over 25 years old. Old School hand made in Japan - these are super rare - just check out Yahoo Japan theres 2 for sale and both are double what I'm asking. $750 plus delivery/courier. I'm in Sydney so happy to meet somewhere too. Thats half the landed cost of a similar one on Yahoo Japan if you bought it via Import Monster. I've had this for years and never fitted it, I bought it to match the my ARC air box and ARC radiator air guide but it's sat in the garage for at least 4 years so off it goes. Email text or PM - before I change my mind Andy 0402 350 827 [email protected]

SOLD

Here it is. Name plate needs re-spot welding on one side, aside from that it's in great shape for something thats well over 25 years old.

Sweet

Hi Robbie I've got an Abbey Road (ARC) Ti strut brace the same as this if your still interested. It for an R32GTR, I've had it for 4 or 5 years and never fitted it I've got a Tomei triangle one that works fine. Let me know and I can take some actual photos for you.

Call/Text or PM Andy 0402 350 827 Thanks

FS BNR33 HKS ETS electronic torque split controller Forsale BNR33 HKS ETS with complete harness for BNR33 You don't see these with the complete harness very often so grab it while you can. There is some double sided tape on both the Controller and the Power Amp which would be easy to removed. Removed from a R33 GTR it maybe compatible with R34 GTR's but I have no way to confirm, if anyone knows if its compatible feel free to post. My understanding is that it will NOT work on the R32 GTR's as the 4WD system is different to the R33/34's Cool, check the photos it's in good condition what you see is what you'll get. $350 Plus postage or can meet in Sydney.

Getting them Friday so I'll post the result on the weekend. Thanks for the help

Totally. ??

Yeah the guy I'm getting them from said +16, what size tyres are you running? Ive had conflicting info on if they'll fit. I might just have to roll the guards.

The Rays will be 14mm further out than the current R34GTR wheel I have now. I'll measure it and see if there is room, have you fitted +16's on your GTR? Cool thanks

Sweet it's only 14mm further out than the R34GTR wheels on it now. Thanks

I can't seem to work out if a set of Rays LMGT2 17x9+16 with 255/40/17s will fit on my R32GTR. I've searched but can't find anything. Has anyone fitted Rays LMGT2 17x9+16 on a R32GTR without rolling the guards? I'd like to avoid rolling them. Any help will be appreciated Andy

I can't seem to work out if a set of Rays LMGT2 17x9+16 with 255/40/17s will fit on my R32GTR. I've searched but can't find anything. Has anyone fitted Rays LMGT2 17x9+16 on a R32GTR without rolling the guards? I'd like to avoid rolling them. Any help will be appreciated Andy

SOLD

FOR SALE $9000 ONO 2004 Nissan CUBE located in Sydney 2011 This CUBE is in great condition. I have owned this car for 2 years, during this time I have replaced various parts to make sure everything runs perfectly, anything that looked like failing was replaced well before it failed. Oil and oil filter changed every 6 months, Air filter every 12 Months. New tires 29/10/14 from Tempe Tires. 4AT Auto Trans replaced with 2010 MICRA 4AT on 13/01/14 at 56570km Original 4AT started slipping so I replaced it with a 9000km 4AT from a Australian Delivered MICRA. Work was carried out by Landmark Auto - runs perfectly shifts like a new car (MICRA)... The driveline for this CUBE is identical to the Australian Delivered MICRA - parts are plentiful and cheap. New genuine Nissan thermostat, radiator flushed and new coolant on 24/03/14 at 60000km. Cusco front strut brace - Bought NEW from Japan. HKS Muffler - all looks - is quieter than original - this was second hand direct from Japan. Greddy Intelligent Infometer - this reads data from the factory computer via the OBD port, the factory gauges in the Cube's are pretty basic - the factory temp gauge is 2 lights one blue (cold) one red (Bingo too late 110 degrees - bye bye head gasket)... The Greddy info meter can monitor up to 6 different things like: Water Temp Speed Tacho Intake Temp Ignition Timing AMF's Voltage etc... It also has a peak hold feature so for example you will know exactly how hot the water temp got - in this case the water gets to 96 then the fan kicks in and down it goes to 89 - the cooling system in this car is perfect it will sit in traffic or sit on 100kmh on a 35+ day and not miss a beat. The AC is ICE cold. Wheels are MazdaSpeed MS-01R 15in these are made in Japan by RAYS - they are light-weight high quality Japanese wheels with all the original centre caps. Stereo is a Pioneer DEH-P7050BT - this was pretty expensive when it was new and is loaded with features including Bluetooth Audio and Bluetooth Phone - there is a microphone just above the Greddy gauge. Everything works perfectly, you can also plug most phones or USB stick's into it via the USB port - it will play MP3's etc and CD's - if you have any. The remote also has a new battery. The roof racks are THULE and are the correct CUBE version - they fit perfectly and make no extra noise - 2 keys included. I also have these parts that are included with the car but not fitted: Genuine NISSAN front brake pads cost $196.00 from NISSAN - current front pads are still fine I bought these so I had them ready to go. Water pump - bought at same time as the thermostat but not fitted - I was going to change it but original pump works perfectly. TEIN STREET BASIS Damper Coilovers - These are BRAND NEW still in the box. Made in Japan. I bought these but just haven't had the time to get them fitted - these retail for $1400 - just have a look on eBay or call a TEIN dealer. TEIN only make high quality products these when fitted will make this CUBE a real pleasure to drive - these are NOT super hard and will not make the ride harsh - nothing beats new suspension. I have a copy of the NEVDIS report showing the car has NOT been stolen or written off. It is also fully insured with JUST CAR for $10,400.00 As you can see I only buy high quality made in Japan parts, this little CUBE has been very (very) well looked after. I only ever filled it up with 98 from from SHELL or BP. The car is in great condition and has been fully sorted out to last, all the preventative maintenance has been done way before anything failed - this is always the cheapest option. This would make a great first car for someone - its super easy to drive the driving position is high and the front windscreen is huge so you can see everything, it's also the same size as a hatchback you can park it the smallest spaces and loading zones. $9,000 ONO Please feel free to give me a call to arrange an inspection. Thanks Andy 0402 350 827 <script cf-hash='f9e31' type="text/javascript"> /* */</script>

Import Monster http://www.importmonster.com.au