nickperth

Hi i got a general question and hope this doesnt stupid, but ive got a r33 series 2 rear subframe with the whole running gear on it with the ABS type diff and its got the tailshaft. However i have a r33 series 1 gtst which has a odd vibration under load and its defenietly coming from the rear, however on the car its also got a diff that im unkown how well condition the diff is in and its been sitting around for a while so some of the bushes on the control arms are cracked. Would a R33 Series 2 subframe bolt up fine to a series 1 r33 body however the tailshaft on the series 1 is for an auto but as far as i know the 1st section for an auto is generally the unique part and the 2nd part of the tailshaft with the center bearing tends to be the same to the manual models. The reason im asking ive read the r33 ABS diff tend to be longer then series 1 diff and am worried if i bolt it up, the tailshafts might not bolt up correctly. Would anyone know if it would bolt up fine or do you know what you would recommend to measure to see if it would fit fine. Regards, Nick

Hi guys id like to update, the o2 sensor is working fine i didnt check it properly at the time, however i believe after looking at my car i must have a vaccum leak somewhere as the car mainly idles rough,but will stall when i turn the ac on, it drives fine around and you know you can trash it but i think it might be under boosting as when i set it 20psi on the power fc it only boosts to 15psi. However im not too concerned about it not boosting to enough pressure i am more interested in why its running rough and it stalling when the ac comes on. Ive noticed on the fuel pressure regulator it running at 28psi and under load about 36psi, i read somewhere that the fuel pressure is usually around 34psi im not to sure if its not been set. I did have a while ago a fuel smell and some hoses on the plenum side had to be changed im wondering maybe ive got a loose or broken hose on that side, thats causing the issue. Also possibly im thinking i might have a fuel sock blocked or fuel filter. Could someone tell me what could be the causes off a rough idle that will smooth out when reved but it will stall on idle once the ac is turned on. Note that the car also has no bov but has been tuned without a bov, dont know if this could cause issues.

Okay then, well i dont think hell remember me i got it tuned like 2 years ago and thought it could be something else other then the tune. But alright then ill see how it goes Thanks,

Hi i got a r34 gtt and my cars is having issues starting were itll start after 3-5 sec after turning the key and it has a rough idle like as it has cams in it. This weekend im going to do a service on it were ill also do the plugs and fuel filter and clean the AAC valve, but i believe i got a bad o2 sensor. The car has a tune on it i got the typical high mount with a gt3582 with the gate going straight to atmosphere and got a plazemaman plenum. I haven't had this issue till recently were its started to run rough and take a while to start. But when i checked my power fc i noticed that once the car was warmed up and after a drive the o2 sensor reading was at 0.02v and when i reved it to about 3000rpm it would only go up to 0.04v. Ive got a photo of my data reading from the power fc, but does anyone know what else could cause my issues as i got no vacuum leaks or anything, but i am pretty certain it is the o2 sensor it self, as i dont believe it has been disabled. I was planning on just replacing the o2 sensor with just a genuine nissan o2 sensor. Thanks, Nick

Hi, I am selling a set of 18” G-Max Engima wheels in good condition, they recently came of a R34 GT-T, and these wheels are an 18” rim. The rears are rims are a 9.5” wide rim with a +35 Offset while the fronts are 8.5”rim with a +33 offset. They are in really good condition and are 2 piece fully forged wheel, these are a very good quality set of rims and not made of cheap material, I never had any what so ever trouble with the wheels rubbing on the guards or on full lock, I bought them a couple years ago for $2300 new. These wheels are in no way out of balance or buckled. These rims are a perfect fit for any skyline, however will fit other cars as well, plus they look great with a nice deep dish touch to it. It shares a PCD Stud pattern of 114.3 X 5, the wheels comes with center caps. Price is $1100 Negotiable Wheels are located in Darch Contact number is 0481-502-605 contact me any time.

Hi im wrecking my 33 skyline motor and gearbox are gone, cars got rear end damage as got rear ended on the Tonkin, though car chassis was still in driveable condition. Plus selling off some parts ive had lying around. List as follows: Nistune ECU Z32 Fits R33 RB25: $500 Turbosmart Eboost Street purchased mid last year still has warranty and receipt: $300 Left front fender KR4 Silver No damage or scratches: $80 Cluster 142,xxx kms: $110 S2 Dash with no damage and airbag panel still intact: $250 Passanger side airbag kit: $200 Drivers Mirror: $70 R33 Manual Tailshaft: $100 R33 Diff i installed thicker shims a while ago and is in very good condition, this fits ABS model cars: $200 Center Console: $50 Drivers Door : $150 Passanger Door: $150 Roof Liner; $50 Door Side cards Series 2: 50 each side Have plenty more parts wrecking will update tomorrow with more photos and parts. Contact no: 0481502605

Hi i got a factory optioned R33 Momo Steering wheel in good condition with airbag, item is in good condition its been on the car its whole life and has 130000km worth of wear on it. Reason for sale someone rear ended me and car has been written off so im just stripping it. Price is $500 neg. Located in Perth

Hey i got a rear diff and brake setup and subframe from a ABS model 33 if your still intrested

I have a R32 Power steering Pump nothing wrong with it fitted it only once thought it was my pump gone turned it was my rack and its been just sitting in my garage. You can have it for $60 I can provide you photos if youd like

Hi i have a pair of 20mm gktech wheel spacers these are brand new never been used, i was going to use them for some wheels that needed spacers, but i ended up getting a different set of rims and have no use for it. Items are located in Perth and will come with receipt and will ship any where Aus wide, with registered postage and insurance. If need to get in contact with me send me a text on 0481-502-605

Price drop $450

Hi I got one how much are you offering

Hi I got one how much are you offering

Hi I got a pair of 20mm gtech ones if your still interested pm me if you still want them

Hi I got a pair of 20mm gtech ones if your still interested pm me if you still want them