black_tx5

i know for the rotor blokes dalton automotive is the choice for microtechs. should be getting my tx5 done there soon. not sure how they would be with a 6cyl, but i know they have done a few vl's.

it sounds like the ebc isnt setup properly. ive seen the same thing happen on my mates 180sx. try fiddling around with it.

Item: VG30 Turbo Location: Melbourne Item Condition: Turbo is in good condition. Exhaust wheel blades have slight dings in them, but it doesnt seem to hinder performance. I have only boosted it to 9psi. No internal wastegate actuator as I am running an external gate. Reason for Selling: Turbo is too laggy on my 2.2L TX5. Fullboost is at ~4500rpm, want a R33 turbo so it's more responsive. Price and Payment Conditions: Straight swap for an R33 turbo (non nylon compressor) after inspection on both turbos has been made. Contact Details: Call Nick on 0408 605 141

Sounds like a boost leak of some sort. check your intercooler piping before buying a new turbo.

Do the vg30 turbos have ceramic rear wheels? Because that looks awfully similar to my turbo, which i have always suspected was an rb25 turbo...

Because gcg want $2000 that i dont have.... Just out of curiosity, what are the measurements of the standard r33 compressor wheel? Inducer and exeducer would be great! Here is a pic of the wheel. On the left is my standard ihi comp wheel, in the middle is the t4 comp wheel. t4comp.bmp

I have just purchased a to4 compressor wheel with an inducer size of ~50mm and an exeducer size of ~75mm. I am looking to use this wheel in my r33 turbo but i have a few questions. The first is will any t04 comp cover fit on the hitachi centre cartridge? The second is there a non ceramic turbine wheel with ~6.5mm shaft that will fit the turbo? Thanks in advance. Nick.

Isnt the 1jzgte (2.5ltr) and 2jzgte (3.0ltr) from the mk3 jza80 supra? I thought the 1uz was from the soarer (4.0L quad cam v8)? They run a twin turbo variation of one of these engines in the hks drag supra.

Not sure if it is jasma approved. Is that some sort of governing body?

I have for sale a brand new 90mm Veislide cat-back exhaust for an r32/33/34 gtr. It is full titanium (the real deal here folks!!!) and weighs about 4kg's. Comes with VeilSide titanium teardrop muffler. It has never been used and is sitting at my uncles workshop collecting dust! Asking $2000. This is a quality product and buyer will not be disappointed! Call Nick on 0408 605 141 or email [email protected]

sounds like what happened with mine. if you find out what it is let me know!!! :Pimp2:

I thought leaky hose so i changed it, same thing. Boost has settled to 8psi through every gear to redline. BTW, I have an 88 TX5 Turbo with full engine rebuild (forgies, resized rods, knife edged crank etc), ported head, standard manifold with r33 s1 gtst turbo (plain bearing) and some other goodies. Still have to get it tuned with the microtech and fuel system upgrades. Shooting for 160kw atw on 14psi.

i installed mine yesterday and had it running at stock boost. The ext wastegate spring is 7psi, and prior to installing the boost controller, my boost was 6psi constant. after installing it, boost went up to 8psi (the instructions say it will go up slightly), but then it started boosting higher and higher until the wastegate wouldnt open! i pulled it off and ran straight hose from turbo to wastegate, and now my boost is at 10psi. I dont understand how it can be at 6psi for 3 months, then go up to 10psi by itself?

I have an EMS Stinger 4424 for sale (version 3 i think?). had it in a wrx, but sold the car since, and returned it to its standard form. ecu was in the car for 3 months, and pumped out a healthy 160kw at all four wheels on 15 psi, tuned by xtc in coburg. As for pricing, well they retail for $1000, so willing to let it go for $800. Comes with full loom. Located in Melbourne western suburbs. If pics are required, i can supply, but it is all on the ems website. Interested? email [email protected] or call 0408 605 141. -Nick.

The series 4 rx7 injectors are rated at 550cc and are high impedance. Model number is 195500-1370.