gerryb

Thanks, I put an add on there.

I'm after a long nose R200,(HR31, Z31, 280zx, 260z etc) open centre, stuffed or just case is fine. [email protected]

I need a solid brake line that goes from the caliper to the flexible brake line for front RHS 4 pot caliper, off R32, R33, S15, Z32, etc. 0414508635

I've got a copy of win me-98 for sure and maybe a copy of win 2000.

Skorj just for info to help your injector sale. The crack you speak of sounds like it is just the pintal cap. I pay $1.60 for these direct from the main injection supplier here in Brisbane. It just needs the old one pushed off and the new one pushed on in its place. Re: R33 these injectors will not fit the standard fuel rail as R33's take side feed injectors the same as sr20det's, BUT just like sr20det's, (When fitting bigger top feed injectors such as RX7 series 4/5 ones), you can get a replacement top feed fuel rail and then they will fit, and you need to run resistors as R33 (GTS-T's) take hi impedance injectors.

I'm in Brisbane you have PM. (My mobile number is 0414 508 635).

I have some GTR injectors $35 each

I have some 460cc hi impedance nippon denso injectors, straight bolt in for rb20det's and match factory ECU. $35 each 0414508635

I'm the person you've been speaking to by PM! about them

Ah you made a mistake, you should have bought high impedance series 5 RX7 non turbo injectors from me, just $35 each. Exactly the same as GTR ones, (Nippon Denso top feed, same body etc), but hi impedance so you don't need a resistor pack to run them with a standard R32 computer and also 460cc each instead of 440cc. (Bet you paid a lot more for the GTR ones too?) Gerry

Price update $35 each. I`m selling them because I need side feed.

I have a set of 6 460cc series 5 RX7 hi impedance injectors that are direct fit to R32 silver top RB20det fuel rail and hi impedance to match the factory ECU. These are hard to find, (most around are series 4 lo impedance), $35 each.

R31 Skyline 40mm lowered pedders red front springs $60 the pair obo (can post if required) [email protected]

Pedders red 40mm lowered front springs for R31 Skyline. $60 the pair obo. [email protected]

Email sent I have a set of 6 `GTR` injectors $35 each. Best to call me on 0431387005 and I can tell you if your car is set up right to fit GTR injectors before you buy some that won`t suit if you don`t have the right setup. [email protected] Gerry

pm sent

High impedance injectors are all SOLD at this stage, I still have some low impedance ones left for those people running aftermarket ECUs, e.g. microtech etc., which will run either high impedance or low impedance injectors. Gerry

No price is $35 and thats it , (last lot I had sold fine at $40 and $45), so $35 is bottom dollar. I have a mailbox full of replies so no bargaining, $35 is the bottom price!, and cheap at that

No price is $35 and thats it , (last loy I had sold fine at $40 and 445), so $35 is bottom dollar. I have a mailbox full of replies so no bargaining, 435 is the bottom price!

Sorry Clinton the phone is charging I forgot about it! Ring my mobile now I've just turned it on, (its now 7.49pm), or go to your pm and I will pm you my home phone number now and you can ring me on that after 8pm tonight. Gerry

RB25det,in an R33 setup takes side feed injectors so these wouldn't work unless you got a custom fuel rail,( I don't know about R34's, but 666dan above says R34's take top feed so I'll defer to him on that)

All the same price $35 each

No way sorry, normally $45 each (and that's cheap), so $35each is bottom dollar.

yes they are a straight swap for an rb20det, (I also suply spare electrical connectors with them in case you need them). I'm presuming your rb20det is for an R32 skyline or Cefiro?Check your pm with regards to postage cost to London. Gerry

I have some 460cc injectors nippon denso high impedance to suit rb20det's $35 each, (also have some 460cc low impedance to suit ca18det $35 each) gbaulch@hn,ozemail or 0431 387 005