First time i've wrote a build up thread so i here i go
bought an r32 gtr with blown turbos after having many skylines aim is to build a street car with good power 350kw at all the wheels
and to mainly do it all my self with sum help from mates except engine build
its been 18 months since i bought the car still have not driven my gtr other then towed around the front yard to another shed.
pulled turbos off and of course turbo was seized so new turbos bought garrett 2860-5, but end up selling them and got a twin td05 18g high mount kit with 50mm hks gate.
test fitted
then i though better check what was in this engine, it had cams 264 9.25 bonus and ported head.
checked the oil pump drive not a pritty site so found a n1 vergin block and crank will use that, also found then engine had been taken out to 87.5 60 tho over.
also going to go extrenal oil pump with larger sump set up yet to buy.
sum of the upgrades so far
r33 brembo brakes painted red
braided brake lines
volk gtc 18x10+22 with 265x35
tein coil overs all round and few ajustable arms
buddy club race zorst
n1 head light and boot lip to keep the car looking stockish
hks gauges egt, boost, oil temp, water temp and oil pres
nismo twin plate clutch
nismo speedo clustor
greddy radiator
split fire coil packs
surge tank and 044 pumps
greddy fuel rail
so after seeing the oil pump drive thought may as well do it propley as well as the smell of the bearing shells
so did sum research what to buy and where
bits i have bought so far for the engine build
manly h bean rods with arp bolts
cp 86.5 pistons
tomei 1.5mm head gasket kit
os giken cam gears
tomei valve steam seals
tomei cam bolts
arp head and main bolts
tomei valve spings and retainers
n1 water pump
tomei over sized valves
have got most of the parts to have the engine built
its just the coin that holds u back
does not take much to spend so much