r33skyhigh

hey mate i got a r33 full shell with nothing in it no interior no motor gearbox driveling suspension. not rolling but still rego has no front end and damage behind drivers door

all exterior parts(white immaculate condition) 18" rims with tyres 235 front 265 rear motec m800 rb25det with forged pistons and rods, cams, cam gears, stainless top end, strengthened crank (less than 30,000kms since rebuild) 5sp manual gearbox lsd rear diff nissan 4 pot front and 2pot rear brakes (EBC green stuff pads, dba 4000 rotors less than 2000kms old) rear axle shafts lightened and balanced tailshaft garrett gt35r turbo k&n filter 2x front facing plenum 80mm throttle body stock throttle body 2x top mount exhaust manifolds 48mm turbosmart progate wastegate turbosmart veeport bov hks ssqv bov 300kph nismo cluster 880cc denso injectors bosch high volume fuel pump high flow custom injector rail splitfire coils polished rocker covers with breathers & catch can turbo back 3" exhaust bilstein shocks king spring SL springs all whtieline bushes radiator power steering pump a/c compressor a/c condenser alternator m spec spoiler vented bonnet 2x short shifters tail lights nismo side indicators all interior parts black gear/handbrake boot with white stitching all original windows 2x defi bf boost and oil temp with sensors greddy pillar dual gauge pod AND MUCH MORE JUST MESSAGE ME FOR ANY PARTS/BOLTS ALL PARTS ON VEHICLE ARE AVAILABLE 0401439396 vehicle made 480rwhp and was all in good condition when removed

thanks mate ur a champion

hey guys just wondering if someone can take a pic of there tps and the colours of the wires as im rewiring mine or the order of the colours on the plug. thanks

yeah i got the fitting its just not on. ill try tapping it in see what happens shouldve done it before i put everything else on...

no where the actual top hose from the radiator clamps onto the inlet, mine didnt come welded on or anything but i got the littloe pipe that fits into the hole as pictured below

hey guys ive installed my intake plenum but have no idea how to install the top hose outlet on the plenum. cant weld it because of the different types of material. is there a special glue of some sort that you use to put it in. or what have you used? thanks

yep that sounds like the one. wen u get something sorted let me know and would appreciate if you could do the same to mine

hey guy i got a 80mm throtle body which is a universal type. the tps (throtle position sensor) on the side of it is completely different to the factory one. has anyone heard of an aftermaket tps to fit onto most aftermarket throtle bodys. thanks

Hey guys, last week i pulled my inlet manifold off to change a stupid cooling hose at the back of it. when i went to put everything back i realised there was a valve that didnt have a hose on it. since then the car has been running lean and there is air coming out of the valve. it is located under the inlet manifold. if anyone has a clue where it goes to or anyone in the noranda area that can pop down and give me a squizz at their skyline. thanks

hey guys today i was just driving along till all of a sudden my car stopped! got it towed, check for fuel and for spark, and i have no spark. they are all plugged in. im running a motec m800 not sure if the wiring is stuffed in the motec or in the standard wiring. any help is much appreciated. Thanks Paul

Well sometimes when i drive my car hard and get to high revs my oil dipstick desides to pop out and blow oil everywhere in my engine bay. has anyone made up a little clip for it or has tied the dipstick down to anything? Thanks Paul

also you can tell by how high the pedal is when it disengages aswell as slipping and squeeling

hey guys, plugged in my laptop today to my motec to see what that stupid hesitation is. everytime it does it the "traction control activated" popup comes up and when stops goes away. is this a faulty sensor of some sort? if so wats the go with replacing/ripping out the traction. Thanks Paul

looks like im doing the coil swap tomorrow spent all day polishing it haha

realised today that i need new brakes for the skyline, atm i am getting really bad brake shudder and fade. wat would yous reccomend to get? i ordered ebc green stuff pads which are 700 degrees resistand and dba slotted and dimpled 500 series. cost around $700 for front and rear pads and front rotors. bit steep but wen you have to stop you have to stop

did abit more work today, tomorrow i am putting my mates r33 coils in my car and seeing how it runs. hopefully better. gota do a few little things like change belts, service, brake fluid flush ect, and polish it too so its a big weekend for me!

yea the thing is its running full motec and i highly doubt that will shit itself. i have to get a cable for the motec to plug a laptop in and see hte problem, again this avro will b more diagnosing and ill see how i go, thanks for the help so far guys

im running iridium plugs, and they look near new. coils are good too not arcing around edges. im a mechanic so i have run fuel pressure tests to eliminate the fuel system. i have also quenched the cam sensor and that made no difference took out plugs and coils today to check them, put it back in and didnt seem as bad, took longer then usual for it to start stuffing up i think i might fill the plugs with a grease to see if that fixes it.

thanks for the help, umm its got forged pistons, cams, big garret turbo, full exhaust with extractors, full motec, front mount, bov, upgraded fuel system, upgraded ignition system, rims, all whiteline suspension + more i cant think of.

hey guys picked up my r33 yesterday and has a mad hesitation not only on boost but even down low, when accelerating it hesitates, then power comes in then hesitates once again. today i changed the fuel filter finding the filter itself inside the housing was rattling around. it made it slightly better. the car has a large bosch fuel pump in it and the next stage it to replace that. if anyone has had anything similar in the past i would like to hear about it. Thanks, Paul

would love to see this thing in action, surprisingly you managanged to squeeze it in, good work!

love the look of it, how many coats did you use?

i saw them on the US ebay a few weeks ago, try on there you might have some luck