andy panda

Just curious what features do you loose running the z32 ecu in an rb25? Am I correct in thinking you loose vtc? If so does it affect power much?

Do u know if these differ from the r33 gtst ones? Where are u located?

I'll also do swaps for a set of coil packs to fit an r33 gtst s2

Also what offset and what colour

Turns out it was just the actuator to pressure line hose being restricted. Now just gotta get some new coil packs, turns out they're stuffed -.- anybody got any? Heh..

I'm not organizing postage for wheels Sorry. Price drops: Ecu $350 Seats $75 Spacers $50

Bump.

Bump.

That would see it to the standard 7psi right? I remember getting RE customs to boost it to 10psi aaaage ago and then I got epa'd and put some stuff back to standard, they might have drilled a hole in the solenoid which Racepace said can be done.. Although using the solenoid before the gasket change it would get to around 7. >.<

No no there isn't... I guess I'll look into that then.

Plugs are already at .8mm... Hmmm more money to spend on the car greaaat lol

So I replaced my turbo gaskets and exhaust manifold gasket recently on my r33 gtst, and when driving it I noticed it was boosting higher than normal by about 3psi ( standard is 7 and it was boosting to 10-11), is this only because the new gaskets are holding boost better, and because it's cold tonight? Previously it stayed on 7psi the whole time no matter how cold it was. Could it also be my solenoid vac lines? I have it all as per standard and even if I swap the vac lines from the top nipple on the solenoid to the bottom one nothing changes. Do the stock tee piece have anything to it or are they just straight through? I also noticed once the car gets to 4500rpm it does something weird, it kinda coughs and splutters, like a rapid misfiring... Could it be the ecu activating a boost cut mechanism because for some reason it's running over 10psi? Or I thought it could be the fuel pump, or my coil packs or something, would I be able to put it on a dyno and target that kinda that? Or would it more be a trial and error replacing parts.. :S I'm positive I have everything bolted up and sealed properly so I'm baffled as to what's going on. Any help would be good.

Price drops: Rims $350 Ecu $400

Cam gear gone. Buy my other stuff

I dont have anything on today if u want to meet sOmewhere to pick it up, where abouts are you from?

They should both be the same, but I was intending on using it for an exhaust side as the inlet has vtc stuff

Put me down for skid pan stuff if you can. I might Leve during the battles though.

I'm pretty sure it'll fit any RB engine, not sure what the deal is with the neos though.. Might want to research that

Hey guys got a few things here that have been sitting around that I don't need, so putting them up for sale. Prices are ONO. Any enquiries just PM me. For sale: Greddy e-manage blue + wiring loom for r33 gtst (plug'n'play) + program install cd + spare loom parts:- $450 Volk f-zero challenge wheels:- 18x9 +45 and 18x10 +48. White with chromed outter lip. Fair few scratches, structurely fine though. $400 20mm bolt on spacers:- nearly new, missing 1 nut due to a stripped thread on my original wheel stud. $80 R33 gtst s1 front seats:- in good nick. $100 R33 gtst radiator:- not sure if it's busted or not but.. FREE. Blitz pod + adaptor for rectangular AFM bracket. $40 Apexi pod:- faulty screw hole on rectangular afm bracket. Fine for square type bracket. $20 Rb25det pod partition:- bought from JustJap and cut a hole for standard intercooler pipe. Black. $75 Tomei RB cam gear:- $50 SMS for pictures. I barely have any time for packaging and organizing couriers n stuff these days, so I'm going to say strictly pick up only at this stage. Located in eastern suburbs of Melbourne. SMS me on 0434145894. Thank you!

If you still need anybody I'll help, I cbf driving my car at this stage. Lemme know.

Na it's one of the black joiner kinda pipes it's all good though I've found somebody with what I was after thanks anyway though.

Actually if you have the reducer pilot that goes from the cold side i/c pipe to the silver one too that'd be great..

I'm after 1 of the rb25 90 degree bend sound mount intercooler pipe. I'm not sure if the one i want is the rubber or metal one, might as well grab both if anybody got them spare lying around. It's to go from the cold side of a return fmic to the standard intercooler pipe heading to the throttle body. The bit directly next to the air box mount. I'd rather do pick up unless you can send it down by the end of the week. Gimme a message on 0434145894, cheers!

White r33 gtst with black wheels on Anderson street in lilydale

Realized girlfriends birthday is that weekend so I can't go, imma so sad I missed the last one too. one day I'll join you guys... One day...