unc33

have a new hdi sbd-c boost controller. (not used) comes with: -boost controller module -boost gauge (analog/digit) -boost solenoid -wiring looms this is a simple plug and play device that runs on 12v power, very easy to install! price $300 (no swaps) (-: pics soon :-)

lots of stock and used parts that were taken out at 65'000km all parts are off a 1995 ser 2 r33 gts-t skyline rb25det -2x stock afm one green label one pink label. $95 each -stock jap spec radio 2din $20 -stock springs $50 -stock intercooler (side mounted) $20 -random intercooler piping. 3" includes clamps and joiners.. txt or pm -stock rear bar (m spec) $200 -stock m spec rear wing mint condition (minus centre light strip) $150 -stock intake manifold $150 txt 0422455542

hi guys. ive spun the main bearings in my rb25det.. plannin on replacing main bearings and big end bearings.. anyone be able to tell me wat tourque values i should use for each one??

had the same problem on another r33 gtst ser 2.. was only gettin 250-300km per full tank.. was the o2 sensor.. id cheack that.. replaced it, reset the stock ecu and got 430km on the first tank and yes 470km is good..

bump

ok so that sale fell through... back up for sale!

SOLD!

bump.. still for spacers.. dont have to be new..

sorry.. yeah might wana do that.. were 700 now $650!

bump

make it 90 including postage and you have yourself a deal

need a pair of need 15mm bolt on spacers.. 5 stud 114.3mm nissan m12x1.25 0422455542

hey buddy.. i have some wheels that look hot on a 33.. check my topics. >> zora wheels

yeah they were blue at one stage... lol

i no its not the tyre rubbing because i took the rim off and the paint off that section of the rim is gone.. plus the sound from the rubbing is not rubber to metal. it is deffinately metal to metal.. i no that the wheel is a 18x9.5 with +18 offset.. i wana no if u can buy aftermarket parts of the arm that goes from the hub to the upper part of the suspension? spacers would be an option but the rim already sit on the edge of the gaurd and id prefer it if the rim was inside or flush with the gaurd..