fattox33

Sorry, forgot. Prices for new parts: Injectors $400 the set FIRM Clutch $350 FIRM.

Also, I haven't put in prices because that's up to you to contact me and negotiate. Be realistic, this money is going into a trust fund for the two kids he left behind. No lowballers, no tight arses. Will sell the whole car as is, negotiate a FAIR price.

Hey guys, posting this on proxy for someone else. A close friend of mine passed away about 12 months ago, I've been asked to try get rid of the old Skyline and all the spare parts. For this, I'm just gonna say what's been done, you can judge what you assume may be there. R32 4 Door (M-Spec) Engine: T4 turbo (I think) I didn't get a good look Factory BOV, also aftermarket available Metal inlet piping PWR intercooler Coilpacks - didn't get a look but I think that he did put some in Forged/Stroked Engine - I couldn't say on part details, as far as I'm aware it's an RB23 stroker. I know he did buy the gear for it ad there's details on the receipts from Mercury Motorsport for an engine machine, balance and assemble. Head porting Nissan N1 oil pump with Tomei pump collar Nissan Water pump Gates belts Turbosmart E-boost Street ViPEC ECU Maybe cams? Exterior Parts - Nick was doing an R34 conversion, and as such has a full kit R32 - R34 Conversion Kit R34 Xenon Headlights R32-34 conversion front guards, bonnet, Z-Tune style front bar, rear bar, side skirts and widened rear guards 4x R32 M-Spec wheels Spares - 2x R32 M-Spec rear bar 1x R32 M-Spec front bar 1x Corner indicator for R32 (I think the passenger side?) 1x Spare R32 2-door rear light Interior R32 GTR bucket seats? Don't quote me on this but they looked right. I've been out of the skyline game 9 months, I forget a lot. Interior trim pieces Spare roof lining Also available: 6x Bosch 750cc injectors, BRAND NEW, UNOPENED IN BOXES. 6x NGK Spark Plugs - Part no. BCP6ES - brand new Set of Apex'i coilovers - fairly good cond. BRAND NEW UNOPENED Exedy Sports Tuff clutch kit Body has 141,xxx genuine KM on the clock. Contact: Matt (me) on 0413 475 969 I'm the first port of call. You go through me to sort everything and I tee up everything with the current owner. Any questions, direct them to my mobile number. NO PM's, I'm rarely on here any more. I've highlighted it in case you have trouble reading. I've attached receipts, I'd rather try and sell the car as a whole but will sell spare parts happily. The car was in an accident, chassis is fine and there's an undressed front cut there to replace the damaged sections. The front end doesn't actually look that bad where it was damaged, Nick was a qualified panel beater so he had a lot of work he did to get it right but decided to replace. Images: R34 Headlights R32-4 Conversion Guard R32-4 Flared Rear Guard R32-4 Side Skirt R34 Z-Tune copy front bumper Undressed front cut for repairs Conversion rear bar R32 Rear Bar Rear Bar 2 Rear Bar 2 again Turbo in engine Engine Bay R32 Rims PWR Cooler Cluster showing odometer Apex'i Shocks Rear End Spare Parts More Spare Parts Bosch 750CC Injectors Injectors and Plugs Plug showing P/N Clutch kit - box pic f**ked out Page 1 of Receipt showing details Page 2 of receipt showing totals spent.

BUMP - What's left you ask?? 2x R32 M-Spec rims 2x AU Falcon steelies - $100 for all 4 or 50 a pair! R33 GTR boot lid, immaculate condition, comes with lock and key to suit, $300 That's all folks! Get in quick before they go! 0413475969, items in Toowoomba QLD

Also available, full loom minus ignition $200

Have been wrecking/selling off my R33 S1 after accident, here's what's left: All prices are firm unless otherwise stated Interior: Cluster with ~168,000km (I can't remember) $75 + post Full dash minus passenger side air vent - $100 + post/freight All trim minus - centre console/shifter surround, door cards - $10 a piece plus post "2 Door" door glass pieces - tinted but could use a retint - 125 a piece, freight at buyer's expense Passenger side window regulator and motor - $125 (i know what these are worth, I've been through 4 of them and they cost me much more) Mechanical: R200 LSD with drive shafts - 5 bolt! $500 ono GReddy style polished plenum, with 90mm throttle body, and fuel rail with 650cc injectors (14mm o-ring) - as a set $550, seperately SMS for enquiry Factory R33 RB25DET plenum plus runners - suit polishing or plazmaman plenum - $100 ono plus post Factory R33 injectors (370cc with rail) - 50 plus post Panels/Exterior R33 GT-R boot lid, with spoiler. Primer grey. LED's work in GTR wing - 350 plus freight. This cost me $600 in August, price is firm. GTR side plate sanded and filled. Brand new lock on back R33 S1 front bar - pretty average nick - $50 R33 S1 front bar indicators - in near perfect condition, been on the car under 10,000km - $125 the set posted R33 S1 headlights - need either new front lenses or cleaning up, bit foggy. Matte black surrounds, would look mint with a clean up! - $50 each R33 GTST S1 boot lid, GTR centre brake light fitted, was shaved but due to bottom lock mechanism failure, has been drilled through, suit shaving. Primer grey - $100 posted Rims: Starcorp set - 18x8.5F, 18x9.5R, offset unknown but fit perfect! as per this style, but without the split in the spokes:http://www.tempetyres.com.au/products.php?Starcorp+Racing+Tracer $50 ea AU Falcon Steelies x 2 - $50 ea R32 M-Spec rims, factory, hard to come by! 16x6.5 +40? $50 each See: http://i6.tinypic.com/120h46f.jpg Other: HICAS lock bar with arms - $50, can't separate Rear cradle subframe collars (not mounts, these slip either side of bushing to stiffen up) - $50 the set, cost $125 new I'm sure I've missed something, but feel free to text or call on 0413475969 to discuss parts and prices!! Absolutely has to go by the 15/02! Willing to discount for big buyups!

i need my engineering degree before the "working my ass off" happens

BUMP BUMP BUMP Link G4 Plugin ECU and full car wiring loom available. 0413475969 Loom $500 ono, ECU $1300 firm or as a package negotiate with me

and computer

Bump - all I have left for the moment is Trust intercooler, wiring loom, bare motor (no clutch/intake but can supply factory plenum and injectors), catch can, exhaust manifold, 3.5 inch exhaust

Bump up to the top - ECU available, $1300 firm. Intake plenum, with fuel rail, 600cc injectors and 90mm throttle body - 750 firm, individually cost me 1400 all up with custom made adapter plate from greddy to 90mm throttle with some machining done. Splitfire coilpacks, suit series 1 rb25det, near new 350 the set Nearly all interior parts available, RB25DET wiring loom, ignitor, full loom $200, ignitor $50 Fuses needed? Ask away! Also, I have a rear battery relocation kit available Feel free to ask, turbo is sold however manifold, piping, genuine TRUST intercooler available

Also available - genuine Trust intercooler - 600x300x100 with piping to suit forward facing plenum. Piping custom handmade. $400ono. R33 4 door seats - $100 each plus post Engine is Series 1 RB25DET - supply with or without Link G4, offers currently in progress on ECU so if you want as a package get in quick! Front and rear strut brace - $100 the set, post anywhere, suit 2 door possibly 4 door? Hicas bar - $50 Rear subframe bushings - stiffen the back end up - $50 the set posted anywhere in australia Diff - standard R33 Series 1 diff - $100 Driveshafts - $100 the set any other parts ask away! I have most of the interior parts, as well as panels, GTR bootlid with spoiler, locks, dashboard pieces, interior trim! Text me on 0413475969 with enquiries

Hey guys just curious, currently parting out my 33 and am selling my gear to Convert auto to manual - would the tail shaft from a 2 door 33 fit a 4 door or not?

bump up, all parts currently available excluding: alloy radiator coilovers (possibly) gearbox - still taking offers one or both power window regs with motors horn plug in area

http://sphotos-b.ak.fbcdn.net/hphotos-ak-ash4/400044_10150545442027899_337224808_n.jpg