sideshow

yes at this moment the r34 auto 4wd ecu requires an extra signal for the auto to work properly and so far there is no easy fix so i would not waste time on it

no trick will fix the prob cause its a speed sort of signal and i think the s1 boxes dont have it

i know what the problem with the auto is the s1 doesnt have wiring for a certain sensor for the auto that the r34 ecu needs not sure if the s2 auto has the sensor but its not in the actual wiring so if the auto has the sensor all it means is adding the wire if the sensor is not in the auto then its too big a job to worry about im trying to find a fix that wont cost the earth

hi all has anyone had much luck on this issue i finally got time to do some research with an r34 auto ecu with nistune on it fitted to a s1 stagea found th ecommon boost sensor missing error easy fix need to fit new wire into harness on ecu then drove it and got the auto problem like described above will do bit more research this week to see if its physically doable or money wise if its doable as transmission migh need to be pulled apart to see if it can be done or if im lucky the wires are theere and would just need to be lengthened and wired up to ecu