Clockworks

Blue wire with black stripe it was worked a treat!Cheers.

Someone may be able to help me out with this, Im running a r34gtt with a r33 rb26 and pfc fitted,When i connect the water temp out on the pfc pin(28) to the r34 dash,I have problems starting,any one have experience of this, or know if the sensors are different on the rb26 and the neo?Will the pfc accept the signal from the r34 sensor if they are different? asking a lot here but once again ,thanks in advance.

Hi,maybe someone can help me, when im slowing down for a corner (in gear ),theres a bump from the rear of the car after I have pressed the brakes(though not instantly after or 2/3 seconds),almost seems like iv just left the clutch out though i havent. Its been suggest that its prop related any ideas?

thanks for that. . .

Hi guys,after converting my r34gtt to rb26(r33 eng/box/loom)the wiring is absolutly driving me mad(no tacho/speedo,watertemp,abs,hicas..),would a simple solution be to fit a complete loom from an r34 gtr to my gtt and just reverse the cas?

my apologies to all, the tacho is not working at all,nor the speedo,im not sure where the r34 will get its signal from the r33 pfc and if the r34 speedo will accept a signal. From the r33 box,once again all help and advice greatly appreciated. . .. . Thanks.

help please?

Hi guys I wonder if anyone could help me, We have fitted the engine,box and loom(inc pfc)from an R33 to my 98 R34 gtt Its all gone well and the car is starting driving ok,where im having the problems is with the speedo,rev clock,and water temp,Iv been told that simply connecting the relevent wires to the R33 ECU wont work....any ideas?,help/advice would be great....... I also need help with the abs system should it connect up fairly easily to the R33 ECU?needless to say wiring is not my strong point........ sorry to drone on,one last thing,If I was to get the loom from an R34 Gtr would it be a simple plug and play affair to get everything working?I know I would need a new ECU...... Thanks in advance.