5ky-lin3

bump

Bump Still after manifold (6boost) and exhaust and also piping to suit gt3076 to z32 AFM

Bump. Still looking for a manifold and exhaust

Sorry mate pretty set on the gt30

Hey guys, Looking for the following items; Gt ot GTX3076r Tial 50mm wastegate or similar Manifold for rb25 to suit turbo and external wastegate (6boost prefered) 600cc or more side feed injectors for factory rail or topfeed with rail to suit plenum Front facing plenum (greddy or plazmaman) Exhaust to suit turbo, manifold. Dump + screamer Any help is appreciated. Cheers!

Seperate the Turbo?

Stainless high mount? As in the manifold? What kind?

Hey guys, Looking for the following on a r33 gtst S2; *Swaybays (whiteline adjustable) *toe rods *Coilovers *Z32 with plug *Plenum (plazmaman or greddy with throttle body if available) Cheers.

still up?

Pics? What build were you going to put it on?

bump

Bump

Hey guys, Chasing a few parts for my r33 S2 rb25det. Firstly is a new or very near new Garret 3076r turbo with A/R .82 or .63 housing suited for external wastegate. next is a wastegate to suit turbo. eg 38mm tial wastegate with 1 bar spring and finally to match a manifold to fit the rb25 and the turbo. not too fussed about high or low mount. something good like a 6boost manifold is favourable. Other smaller parts im chasing are a Z32 AFM with plugs etc, and 550 or 600cc injectors to suit rb25 SERIES 2. Any help is appreciated. Thanks

my worry was exactly that. That they wont last and that the small benefits would not offset the possible outcomes

Hey guys, Just been roaming and stumbled upon these things call Air intake supercharger boosters. Does anyone know if they actually work or do anything? any feedback would be appreciated. This link explains what they are meant to do. http://www.performancechiptuning.com/Air+Intake+Supercharger+Booster/2/ Another gizmo I found was a Pivot Mega Raizin battery stabalizer chip. Any word on these and how they perform? Here is a link to one of these http://www.nengun.com/pivot/mega-raizin Cheers, Dallas

righto thanks for the help lads.. Think it has been lowered before i got it but has been a spring cut job

After some quick research I have compiled a list of things that would help address this issue and improve overall suspension. What do you guys think? Have I missed anything? Decent tires (Kuhmo Ku36 for street use) Front and Rear Coilovers (monovalve) Castor rods Front & Rear Camber arms Adj Tie rod ends Pineapples Nolathane Control upper arm inner bushes Nolathane radius rod adj bushes

All suspension (shocks/springs/camber) is all stock.. Unsure on what dimensions the 17" rims are but am just running average tires..

bump

Hey guys! Just a quick question. After my last stage of installments my r33 gtst is now running over 220rwkw, however im having all sorts of trouble putting that power to the ground and before I go for any more power i think it needs to be addressed. What suspension/handling upgrades are there out there that I should be looking at for my rb25? I know a good set of tires is an obvious reason and also a reduction in tire pressure also helps but what other ways are there so I can keep it in a straight line? At the moment under full throttle and it cannot hold grip until the beginning of third Cheers!!

Bump.. All parts still available and keen to get rid of

How much for wheels?

bump

sounds sick !