gzrecoil
Members-
Posts
16 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by gzrecoil
-
I hand pumped it in the transfer case via the fill plug. I did not run the car, but I can still feel some in the bottom of the pan. I'm not sure if it would have gotten on the gears etc. without running the car and if they will slip if I simply just try to jack the car up on one side and flush with ATF. I am not sure if it matters that I did not fill it through the boot, rather the fill plug above the drain plug under the car.
-
I am an idiot. Don't know how this happened. Am I okay getting as much of the diff fluid out of the transfer case that I can and flushing it with ATF or do I have to take the transfer case out and clean it somehow? Please help! I was thinking of jacking the car up on one side only and try to get as much out as possible, and then doing the same thing with ATF, and then refilling after flushing. Does anyone have any suggestions? I don't want it to slip, I'd rather fix it the proper way even if it requires dropping the transmission
-
PLEASE DELETE
-
Cam Angle Sensor Position
gzrecoil replied to ZIGZAG GTR POWER's topic in R Series (R30, R31, R32, R33, R34)
HOLY CAPS LOCK BATMAN... Sorry, wish I could help. -
Most battery tenders can test alternators. Some shops will test them for free also. That will rule that out.
-
Car Almost Stalls After Revving - Help?
gzrecoil replied to gzrecoil's topic in R Series (R30, R31, R32, R33, R34)
Ok, so i see it goes in after the MAF, I'll have to look tonight to find out where I can run a tube. I haven't noticed any open plugged holes before. My BOV is on the left side of the motor by the battery, and intake is on the right. I would have to run a tube across or under my motor, or relocate my BOV (No clue how to re-locate) Should I buy an SAFC or an idle stabilizer or should I just go re-circ? I could care less about the noise, reliability and cheapness of fixing the issue are the most important things here. -
Car Almost Stalls After Revving - Help?
gzrecoil replied to gzrecoil's topic in R Series (R30, R31, R32, R33, R34)
If I were to buy the attachment above to recirc the Greddy Type RS where do I run the piping to? I don't have the stock recirc piping or anything so I assume I will have to fab it. Would really appreciate your guys help, I really could use this car on the road for the summer -Recoil -
Car Almost Stalls After Revving - Help?
gzrecoil replied to gzrecoil's topic in R Series (R30, R31, R32, R33, R34)
I found this recirc adaptor I just don't know what kind of piping to buy or where to hook it up. http://www.frsport.c...product_id=1309 -
Car Almost Stalls After Revving - Help?
gzrecoil replied to gzrecoil's topic in R Series (R30, R31, R32, R33, R34)
We'll see... I would love to have something but haven't had the money. Curious, I'm being told if I have the right size flange I can make the greddy bov recirc? If that's the case I wonder if I should try to acquire stock piping or make some myself and buy a flange somewhere. So confused... Picture of my BOV attached. -
Wow Looks Like A Mean R32 Gtr Bodykit On The Way!
gzrecoil replied to tango29's topic in R Series (R30, R31, R32, R33, R34)
Looks pretty ugly to me lol. -
Car Almost Stalls After Revving - Help?
gzrecoil replied to gzrecoil's topic in R Series (R30, R31, R32, R33, R34)
Thanks. I did a quick google search for CAS last night and realized that. After reading a lot about VTA BOV's I agree this very much could be causing the problem since I'm still running MAF's. I wish I had enough money to take the jump to a Power FC D-Jetro w/ MAP sensors but I think I'll take the cheap route and try to find some stock recric BOV's. Will post up my findings when I can find some to use. -
Car Almost Stalls After Revving - Help?
gzrecoil replied to gzrecoil's topic in R Series (R30, R31, R32, R33, R34)
Yes I do have a VTA BOV, a greddy one. I don't know anything about how it's hooked up. I will have to figure out all the vacuum hose locations and trace them I guess, not looking forward to that. I just bought a compression tester so hopefully I can test tomorrow. Just need to locate where the CAS is to remove it for the compression test, I'm a noob lol. -
Hey guys, recoil here. Have a Skyline R32 GTR, live in BC, Canada. My mods are much larger intercooler, n1 turbos, 300 lph fuel pump, oil cooler, sway and strut tower bars front and back, trust dump, straight pipe, 3" apexi exaust, lowered w/ coil overs, 18" LM GT4's. Been a lurker for a while but I'm currently having a lot of problems with the car almost stalling after revving, and misfires, and I need your guys help. Please see my thread http://www.skylinesa...r-revving-help/ It is summer time and I don't want my car to sit for a whole nother' summer, I'm starting to get really depressed that it's not on the road. --Recoil
-
Car Almost Stalls After Revving - Help?
gzrecoil replied to gzrecoil's topic in R Series (R30, R31, R32, R33, R34)
I should also note that one of the spark plugs that I put in is very charred. Although it was at 1.1mm gap, now .8mm, the car was never driven since they have been put in, only idled about 4-5 times to warm it up. See attached picture below. Charred is on right, all the rest look like the one on the left. I wish I knew which cylinder this came out of. I at least know I put it back in cylinder 1. -
Hey guys. Sorry I've never posted, been a member for a while now but haven't been too active. Hope you can welcome me to the communityl I left a post in the newbies section of wasteland. I have a R32 Skyline GTR that is having problems(lots of problems ) When I rev my engine above 4-5K, and let it drop, it almost stalls. It goes down as low as 500RPM and you can barely hear the engine for a moment and then it starts back up. Any idea? I have recently replaced all spark plugs to PRF6A-11 with .8mm gap, also replaced two coil packs that appeared bad, and I also addition taped my current coils with electrical tape although there were no cracks, and replaced the fuel filter. I also have a hesitation and complete loss of power around 5K that I was hoping the above could fix, but I can't get it out on the road to test it for a couple weeks. In regards to the almost stalling problem I have found these could be the problems: Coil packs(Need to test), wires to coil packs Vacuum leak Over-Rev (Bent valves) Bad injectors Fuel pump Head gasket Throttle body IAC valve? I do see a little oil where my spark plugs sit if that matters at all Can you list thess in order of most likely, and if you have any to add? In regards to the hesitation problem: Mostly the same things as listed above except crank angle sensor or o2 sensors could need replacing. The car runs extremely rich. The mods currently done are a Greddy VTA BOV, N1 turbos @ 1bar, larger intercooler, oil cooler, 300lph fuel pump, apexi filters, trust dump, 3" apexi exhaust, straight pipe, that's about it. It seems to have problems with low fuel when going up hills, and I can't seem to empty 3/4 of the tank but I could be hallucinating and my gas gauge is broken. I cleaned the MAF's already so I don't think it's them. Any help is greatly appreciated. It's summer time and my baby just keeps sitting in the driveway, I'm starting to get really sad