URW34K

Hi, does it still have the sock and loom attached? Mill

lights received. top guy to deal with!

pm replied. still looking for one in sydney. if i dont find one today, ill take up the interstate offer

hi, as topic states, need one asap! will pick up within metro sydney. sms me with price and location. 0401755512 no manual radiators and no n/a radiators. must be turbo, auto to suit RB25DET thanks.

pm sent for type x tails

pm sent for z32 afm

Kabul Jap import wreckers, Smithfield SSS automotive, Girraween <<<i highly recommend for skyline parts/import parts in general. top blokes and are very knowledgeable with skylines, as they have a gtr race car themselves.

try calling around import wreckers? just tell them what car youve got, not real hard. or troll the for sale section?

this is what i would do in order; check for vacuum leaks (it is a 20yr old car after all) check coolant temp sensor and idle air control valve fuel pump/wiring to the fuel pump clean/service injectors good luck.

it depends what you use the car for. lowering springs such as king springs/pedders/teins fitted to standard shocks can prove to be a great upgrade over standard. keep in mind that these springs are lowered to suit the stroke of the standard shock, to ensure you are not hitting the bump stops. makita-spec springs are terrible, unless you like the car bouncing around like a pogo stick. aftermarket coilovers are great for adjustability and are a good option for not just lowering, but provide proper handling (depending on what sort of adjustments there are). if you plan on slamming the car, make sure you get body height adjustable coilovers.

maybe something like this if you are concerned about your bumper getting burnt?

hi, keen on the cusco coilovers for s13. pm sent.

hi, need money very soon, got a few things up for sale. nistune ecu to suit s13 180sx sr20det red top (ecu number 62) tuned for: FMIC 3inch turbo back exhaust t28bb walbro fuel pump 550cc inj R33 Rb25 s2 pink label afm this thing owes me over $500 road tuned by toshi, very safe AFR on 12psi- 155rwkw with dyno paper to prove stock bov was not letting me boost anymore than 12psi on the dyno. was told by unigroup that it can potentially make 200rwkw on 18psi have not yet gone back to dyno though. if you are thinking of buying the ecu/inj/afm as a plug in package, i do advise a power run to double check that all is in order. $350 2) R33 series 2 pink label afm with plug was used with above ecu mesh still intact same diameter as z32afm rated at approx 220-230rwkw one corner of the afm housing where the bolt runs through is chipped off, but can supply another dead r33 afm for the purpose of reshelling still works as it should though. $120 3) high flowed sr20de 550cc injectors by pj's quickbits flowed within +/- 2% of their range no flow report- lost it was used with above ecu package, working 100% all o-rings attached $250 total package owes me $720 will take $620 for the lot, free delivery aust wide. IM HAPPY TO SPLIT THE PACKAGE! 4) bridgestone turanza's- pair. 225/55/17 80% tread. $80 5) x8 extended studs- came off abs 1997 type x front hubs $30 6) rear s13 subframe- all arms attached, no diff. non hicas. came off '93 180sx. very straight. $200 7) Ca18det auto VLSD diff 4.3 ratios. 6-bolt pattern. oil has been drained. $150 pickup (before it was damaged) call/sms/pm me <removed> miller located in sydney, nsw

seen this car in person. looks the goods with plenty of potential. good choice on the purchase of the s15 miller.

hi. does it have rego? if so, how long? will the a/c be hooked up if you sell with the rb25det? thanks.