Selleck 34GTT

its brand new never been fitted. i have two 3" silicone joiners and a 2" one which i can give away with the turbo other parts were on order including the turbo outlet elbow, tclamps oil return pipe etc but wont get them till end of october i was going to retain the factory airbox so i would have had a custom intake pipe made up, then the small black pipe from the image would not be needed either

hey guys got a Hks gt2835 kai turbo for sale. 0.64 rear housing Its a bolt on for the Rb25/20's its brand new looking for $2000 also got a set of speedflow teflon braided lines and fittings for a direct fit for rb25/20 there all 90's no banjo fittings paid over $400 for all the fittings and hose looking for $350 also brand new, fittings are still in their bags Also got a Z32 AFM with plug looking for $200 All three together will let go for $2400 shipped open to offers also in another thread have sard 650cc rb25Neo injector set let all of this inc them go for $3300 can be picked up from western sydney 2145

anyone interested in the bonnet can have it, just come pick it up or its goin to the tip this w/e

sold

hey guys got a set of 6 sard 650cc injectors there a direct bolt on for the RB25det Neo so they come with the required fuel rail spacer and bolts pickup is available from western sydney or i can post them looking for $1000 ono

hey got a set of caps with my rota and dont want them $50 pickup from western sydney or can post for an extra $10 aus wide

got a set of these for sale bought them a couple years ago and lost them in my room just found em $50 http://www.phantomplate.com/photoshieldaussie.html

pm sent regardin catch can

pm sent regarding catch can

SOLD please remove thread

i never installed it so wouldnt know, its brand new

price drop $160

still here any offers??

right hand guard sold

price drop $20 for the bonnett

bump $180 posted

front reo sold brake lines sold evrythin else still here

lol ya i just wanted to get this stuff out, taking up too much room.

price drop $70

deffinately not what i had expected to sell first but reo bar sold everything else still for sale

R34gtt bonnet has light damage $50 left and right guards, fenders $50 each bonnet catch $40 Bonnet hinges 2x left hand side and 1 right $50 for a pair or $30 each front bumper bar, reo $60 Passanger side door with wndow regulator and wiring loom minus window power window plug $130 rb25det Neo rocker covers $70 2x 19mm 1/2" drive impact sockets $15each passanger side window $50 Gtt standard fuel pump 70thou kml old gtt standard coilover shocks removed at 50thou kms r34 gtt brand new nismo braided brake lines 46200-rsr40 looking for $230 on nengun there $240 plus shipping no reasonable offer will be refused pickup is from wentworthville sydney and i can probly post the smaller items but deffinately not the big ones

hey guys got a set of black rays nuts i used these for three months while i waited for a set of smaller ones to arrive, they were only put on once and taken off once when the new ones arrived. there m12x1.25 looking for $80 but open to offerspickup in wentworthville sydney area or can post for around $10 i think

hey guys got a brand new nismo solid shifter for r34 gtt in the box. part number 32839-rnr40 looking for $180 ono and hoping for a quick sale pickup from wentworthville sydney area. i can post at buyers expense

the turbo didnt actually come with any papers or instructions and its the kai, couldnt find a pro s anywhere. the cooler and sandwich plate ive got aree 100% -10 well thats wat i ordered anyway. i managed to find a shop near my place so i might just take it all down there and see what they can do, im worried about them not knowing which fittings are needed for the turbo lines on the motor end also do i need a new oil drain pipe or will the original one bolt up?

hey guys hoping some light could be shined here, ive just picked up a hks 2835 and a trust oil cooler for my gtt, ive tried searching on here but couldn't really find the details needed, im wanting to buy earls fittings and make my own lines but not sure about the sizes i need, with the oil cooler its AN10 so ill be sweet getting the fittings and an10 hose, does anyone know of a good place to buy it. now with the turbo i have no idea about what size fittings or lines ill need, i know ill need 90's into the turbo but thats about it. what fitting are need on the other end etc. if anyone could help here i would much appreciate it, its killing me seeing it sit in a box on my floor lol on another note does anyone know of a good place to get some alluminium plate or sheet, i need to fab a couple of brackets for the cooler aswell thanks