Red Devil Turbo

using this diagram, I beleive I have to connect it to pin #113 http://www.skylinesaustralia.com/forums/ip...ECU_Pinouts.jpg Also, which Tomei cams would be better? Is it only one type for the RB25 with VCT and Hydraulic lifters? Or what about the Greddy easy cams?

I just don't want to mess up my ECU or my engine

which one is the pin from the ecu that it has to be wired to?

I just bought a MSD rpm switch, any idea how to install it?

someone knows how to make the vct work on the RB25 using the Rb20 ECU and Nistune?

the problem is that I can't get a good explanation of how to make it work right with the RB20 ECU

I'm rebuilding my head using Supertech valves, hydraulic spring kit, seals, valve guides. I'm also rebuilding the bottom end with supertech pistons and eagle rods N1 oil and water pumps. I'm running Nistune with an Rb20 ECU, so I don't have VCT, I want to buy uprated cams, should I buy the Tomei pon cams or the Greddy easy cams for the VCT or use a different profile cams and remove the VCT? If which would be the best and reliable set up for a 500 to 600 BHP car, daily driver a lot of autobahn and some track.

WTB rb30 block, it would be better if it ready to accept rb25 head. Need it ASAP.

How to install a Buddy Club VCT controller I'm using an RB20 ECU Nistune.on my RB25det I just need to know where to install the grey wire (vct input) yellow wire (vct output) green wire (RPM) and do All of the go to the wiring loom at the ECU? also at which RPM should be set?

Bump! NO one in Australia make a kit for the RB25? a full kit including intake pipe and downpipe, manifold with external wastegate?

Somebody selling one of this, gt3076R turbo kit external wastegated.... willing to buy ASAP.

AM performance has a website?

I think is a fures, any I dea where is the ECU fuse or what kind of fuse you think might be blown?

do you know where is the fuse for the ECU

what about the black grounding cable going to the ECU, when I remove it to remove the ECU is sparked like it had a connection, but now does not do it anymore. Where does that cable goes to?

what about the black grounding cable going to the ECU, when I remove it to remove the ECU is sparked like it had a connection, but now does not do it anymore. Where does that cable goes to?

I tried to run my Nistune ECU, it did not worked, I put back the stock one, it started I drove it, park it and the next day tried to start it again and it does not start. I hear the starter cranking the engine but does not start. HELP PLEASE...

I tried to run my Nistune ECU, it did not worked, I put back the stock one, it started I drove it, park it and the next day tried to start it again and it does not start. I hear the starter cranking the engine but does not start. HELP PLEASE...

do you have the manifold, send PM or e-mail for payment, Thanks

how much for a full turbo back exhaust 3.5 with cannon muffler?

how much for r33 gtst nistune ecu? do you sell the software too, I live in germany so I would need the software to tune it

how much shipped to 317th MAINt CO CMR 459 BOX 17511 APO AE 09139 United States

how much shipped to 317th MAINt CO CMR 459 BOX 17511 APO AE 09139 United States