Ruff Ryda

*** New Genuine Japanese Endless Brake Pads for Evo, GTR, Chaser, V35, Skyline, 350 & WRX *** Selling premium genuine unopened Japanese Endless brake pads for Evo, GTR, Chaser, V35, Skyline, 350Z & WRX. Get the pads you won't look back and breath-taking longevity. There's a reason they are called Endless! Prices from $599, which includes both front and rear for premium Jap pads! We are a new business in SA called Ninja Imports and promoting Endless pads at near cost prices! Available for various setups such as decent street upgrade over OEM with low dust (SS-M) , street and track purpose (MXRS) or a weekend track warrior that still drives home safelty even when cold (CC-Rg). Details below: SS-M | 0 -530 degrees C http://www.endless-sport.global/au/products/pad_1a/3 MXRS | 50-700 degrees C http://www.endlessusa.com/#!__brake-pads/mxrs CC-Rg | 50 - 800 degrees C http://www.endless-sport.global/au/products/pad_1a/117 NOTE: The less the graph is coloured in yellow, the more aggressive the pad. Choose which pad is most suitable! Check reviews on these and you will know they are the real deal. FREE postage Australia wide. Any questions, you can reply, PM or email us on [email protected] and we will get back to you as soon as possible. Find us on Facebook! https://www.facebook.com/ninjaimportssa/ Stock and prices are below (NOTE the pads sets RRP between $670 and $799 depending on caliper type and compound): EP400 SSM V35 350Z V35 Brembo Front $560.00 EP408 SSM V35 350Z V35 Brembo rear EP400 MXRS V35 350Z V35 Brembo Front $600.00 EP408 MXRS V35 350Z V35 Brembo rear EP400 CCRG V35 350Z V35 Brembo Front $660.00 EP408 CCRG V35 350Z V35 Brembo rear EP357 SSM V-X, Evo V-X, STi Brembo front $560.00 EP291 SSM V-IX, Evo V-IX, STi, R33/R34 Brembo rear EP357 MXRS V-X, Evo V-X, STi Brembo front $600.00 EP291 MXRS V-IX, Evo V-IX, STi, R33/R34 Brembo rear EP357 CCRG V-X, Evo V-X, STi Brembo front $660.00 EP291 CCRG V-IX, Evo V-IX, STi, R33/R34 Brembo rear EP290 SSM R33/R34, Nissan R33/R34, 350Z Brembo front $540.00 EP291 SSM R33/R34 or EVO, Evo V-IX, STi, R33/R34 Brembo rear EP290 MXRS R33/R34, Nissan R33/R34, 350Z Brembofront $560.00 EP291 MXRS R33/R34 or EVO, Evo V-IX, STi, R33/R34 Brembo rear EP290 CCRG R33/R34, Nissan R33/R34 Brembo, 350Z front $600.00 EP291 CCRG R33/R34 or EVO, Evo V-IX, STi, R33/R34 Brembo rear EP351 SSM WRX Subaru WRX Front DB1170 $560.00 EP231 SSM WRX Subaru WRX rear DB1220 EP351 MXRS WRX, Subaru WRX, Nissan R32,S14 Front $600.00 EP231 MXRS WRX Subaru WRX rear DB1220 EP351 CCRG WRX, Subaru WRX, Nissan R32,S14 Front $660.00 EP231 CCRG WRX Subaru WRX rear DB1220 EP292 SSM JZX100 Chaser JZX100 Front $560.00 EP352 SSM JZX100 Chaser JZX100 Rear

Bump. NOTE: Clutch is XTD, the fly and pressure plate is Xtreme. Any offers?

NOTE: ITEM WON:LT BE SOLD SEPERATELY: S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fork pivot ball to minimise the load that's placed on the standard one. Will be sold in the clutch kit package, not seperately so please disregard listing.

NOTE: Fork pivot ball above is included, it won't be sold as a seperate item so please disregard the listing where it mentions it's for sale at $30 ONO.

Located in Southern Suburbs of SA. Pickup preferred but will post if necessary. No low-ballers please but willing to consider somewhat reasonable offers. Reason for sale is because I have since upgraded and no longer require the current parts: Used but good condition S15 6 Puck Xtreme Clutch which was installed in April this year. - $800 ONO Car is a daily and it has only travelled around about 10,000 kms, cost me $980 alone for the clutch when it was replaced in April. The entire kit is being sold including: Xtreme 6 puck sprung clutch (ceramix & brass compund which handles well over 250 and up to 300 rwkw) Lightweight moly flywheel (single-mass, less weight than the dual-mass) Set of shorter high tensile flywheel bolts to fit the flywheel (could be ARP?) Xtreme Pressure plate Fork pivot ball The only thing that's required is a thrust bearing, it's best to buy a new one while the clutch is out. The part number for it is: TB40017 Part is only about $50 direct fomr ACS in Wingfield, SA Link: http://www.australia...sp?parentid=118 Picture attached of clutch and pressure plate: PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps! Great for decent power gains required on a budget without much pressure drop. Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core. Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core. If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK! S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy. S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one. 2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $40 or so? 8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO Will post some items if they don't sell locally except for the intercooler. In regards to contacting, please PM me and we can go from there. Cheers.

Located in Southern Suburbs of SA. Pickup preferred but will post if necessary. No low-ballers please but willing to consider somewhat reasonable offers. Reason for sale is because I have since upgraded and no longer require the current parts: Used but good condition S15 6 Puck Xtreme Clutch which was installed in April this year. - $800 ONO Car is a daily and it has only travelled around about 10,000 kms, cost me $980 alone for the clutch when it was replaced in April. The entire kit is being sold including: Xtreme 6 puck sprung clutch (ceramix & brass compund which handles well over 250 and up to 300 rwkw) Lightweight moly flywheel (single-mass, less weight than the dual-mass) Set of shorter high tensile flywheel bolts to fit the flywheel (could be ARP?) Xtreme Pressure plate Fork pivot ball The only thing that's required is a thrust bearing, it's best to buy a new one while the clutch is out. The part number for it is: TB40017 Part is only about $50 direct fomr ACS in Wingfield, SA Link: http://www.australia...sp?parentid=118 Picture attached of clutch and pressure plate: PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps! Great for decent power gains required on a budget without much pressure drop. Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core. Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core. If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK! S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy. S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one. 2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $40 or so? 8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO Will post some items if they don't sell locally except for the intercooler. In regards to contacting, please PM me and we can go from there. Cheers.

The sooner you fix it, the less costly it could be. If it's a bush get right onto it as once a bush goes, all other parts around it can deteriorate rapidly including your coilover(s).

What BMC did you use with the Aclons? NOTE: Just saw factory BMC was used. If they were the same piston size as the R32 Sumitomo brakes then that would be fine. If not then the Alcons never reached their full potential...

NOTE: I will be adding a Xtreme 6 puc button clutch + pressure plate to suit S15 on here shortly so once it's out in about 2 weeks I'll add it to the list below. Only done around 6,000 kms, cost me $1000 brand new. - Feel free to PM me anyway regarding the clutch. Reasonable offers considered. Located in Southern Suburbs of SA. Pickup preferred but will post if necessary. No low-ballers please but willing to consider somewhat reasonable offers. Reason for sale is because I have since upgraded and no longer require the current parts: S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps! Great for decent power gains required on a budget without much pressure drop. Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core. Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core. If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK! S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy. Unused Nismo 1.3 Bar Radiator Cap - $50 ONO - WILL POST FOR FREE! Hold that pressure in for more effective cooling! S15: Used Clutch fork pivot ball from an Xtreme Clutch set: TO BE SOLD WITH CLUTCH KIT Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one. 2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - $40 or make an offer? 8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO - RELISTED In regards to contacting, please PM me and we can go from there. Cheers.

Very tempted, but after what I've read I'll take my chances with Jap rotors albeit they are twice the price.

NOTE: I will be adding a Xtreme 6 puc button clutch to suit S15 on here shortly so once it's out in about 2 weeks I'll add it to the list below. Only done around 6,000 kms, cost me $1000 brand new. - Feel free to PM me anyway regarding the clutch. Reasonable offers considered. Located in Southern Suburbs of SA. Pickup preferred but will post if necessary. No low-ballers please but willing to consider somewhat reasonable offers. Reason for sale is because I have since upgraded and no longer require the current parts: PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps! Great for decent power gains required on a budget without much pressure drop. Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core. Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core. If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK! PRICE DROP S15: Unused Whiteline Subframe Bush set (Plus Polyurethane Type) - $150 ONO Stiffen up that chassis and minimise that horrible Noise, harshness and vibration on your daily / track car! S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy. Unused Nismo 1.3 Bar Radiator Cap - $50 ONO Hold that pressure in for more effective cooling! S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one. 2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $? 8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO - RELISTED In regards to contacting, please PM me and we can go from there. Cheers.

NOTE: I will be adding a Xtreme 6 puc button clutch to suit S15 on here shortly so once it's out in about 2 weeks I'll add it to the list below. Only done around 6,000 kms, cost me $1000 brand new. - Feel free to PM me anyway regarding the clutch. Reasonable offers considered. Located in Southern Suburbs of SA. Pickup preferred but will post if necessary. No low-ballers please but willing to consider somewhat reasonable offers. Reason for sale is because I have since upgraded and no longer require the current parts: PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps! Great for decent power gains required on a budget without much pressure drop. Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core. Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core. If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK! PRICE DROP S15: Unused Whiteline Subframe Bush set (Plus Polyurethane Type) - $150 ONO Stiffen up that chassis and minimise that horrible Noise, harshness and vibration on your daily / track car! S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy. Unused Nismo 1.3 Bar Radiator Cap - $50 ONO Hold that pressure in for more effective cooling! S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO Previous owner had this installed on the car. You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one. 2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $? 8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO - RELISTED In regards to contacting, please PM me and we can go from there. Cheers.

NOTE: I will be adding a Xtreme 6 puc button clutch to suit S15 on here shortly. Once it's out I'll add it to the list. Only done around 6,000 kms, cost me $1000 brand new. - Feel free to PM me anyway regarding the clutch. Reasonable offers considered. Only rad cap is firm, all prices negotiable. Located in Southern Suburbs of SA. Pickup preferred but will post if necessary. No low-ballers please but willing to consider somewhat reasonable offers. Reason for sale is because I have since upgraded and no longer require the current parts: PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 ONO - Includes all silicon joiners and clamps! Great for decent power gains required on a budget without much pressure drop. Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core. Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core. If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK! PRICE DROP S15: Unused Whiteline Subframe Bush set (Plus Polyurethane Type) - $150 ONO Stiffen up that chassis and minimise that horrible Noise, harshness and vibration on your daily / track car! S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 ONO Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy. Unused Nismo 1.3 Bar Radiator Cap - $50 FIRM Hold that pressure in for more effective cooling! S15: Used Clutch fork pivot ball from an Xtreme Clutch set ?- $30 ONO? You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one. 2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $? 8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO - SOLD PENDING PAYMENT In regards to contacting, please PM me and we can go from there. Cheers.

All good, snapped one up. Cheers for the offer.

Any daily cars for sale in SA <$1000? Cheers.

S15 6 speed gearbox in good working order. Must be located in SA. PM me if you fit in this category!

Hi, Does anyone have an S15 6 speed gearbox in good working order? Must be located in SA. Cheers.

I need Kumho KU36 preferably or KU31 by Saturday morning. (29/10/2011) Must be in 235 / 40 / 18 profile. Please reply or PM me if anyone has any for sale in SA. Cheers.

Sub sold pending payment

Located in Southern Suburbs of SA. Pickup preferred but will post if necessary. No low-ballers please but willing to consider somewhat reasonable offers for prices listed that aren't firm. Reason for sale is because I have since upgraded and no longer require the current parts: PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 FIRM - Includes all silicon joiners and clamps! Great for decent power gains required on a budget without much pressure drop. Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core. Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core. If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK! PRICE DROP S15: Unused Whiteline Subframe Bush set (Plus Polyurethane Type) - $150 ONO Stiffen up that chassis and minimise that horrible Noise, harshness and vibration on your daily / track car! S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 FIRM Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy. Unused Nismo 1.3 Bar Radiator Cap - $50 FIRM Hold that pressure in for more effective cooling! Velocity 12" Subwoofer including box in OK condition - $50 ONO. NOTE: There are some small dents at the front of the cone but nothing that should affect the output. Good for a low-mid end system without too many hassles. Good bass for the price paid. Comes with harness holders without the belts, one broken but usable. Also has a plate for cable attachments (2nd pic). S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one. 2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer $? 8x NGK BCPR7ES to Suit Modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO (RELISTED) In regards to contacting, please PM me and we can go from there. Cheers.

Would have gone Blitz all the way from the front pipe to the tip but Xforce isn't a bad Aussie product. Changing the front pipe on a tuned SR makes a difference apparently but not sure on an RB. Xforce do make a metallic 100 cell cat in a 3" setup, don't know about 3.5" though. Either way, you enjoy your setup mate. If noise is a concern either throw in on nice big muffler box and / or an Apexi ECV 95mm. If you're game try one of those velocity pipes that have a smaller diameter but flow better with pressure.

Hopefully this helps too. I've asked about his setup and how he's fit it too but he didn't specify any information on his manifold as it looks rather unique:

Location? Highly considering these if you're in SA.

NOTE: Added my subwoofer I no longer require. Located in Southern Suburbs of SA. Pickup preferred but will post if necessary. No low-ballers please but willing to consider somewhat reasonable offers for prices listed that aren't firm. Reason for sale is because I have since upgraded and no longer require the current parts: PRICE DROP: for S14 / S15 2nd hand Hybrid FMIC RS Spec - $200 FIRM - Includes all silicon joiners and clamps! Great for decent power gains required on a budget without much pressure drop. Piping is damaged but will throw that in for free as I believe there may be missing pipes too (can only find 2 pieces since my last tune as tuners changed intercooler to a Blitz CS). Buyer is to arrange adequate piping for intercooler core. Core was previously damaged due to the preivous owner incorrectly installing it, however it has been addressed with a weld and Epoxy. Doesn't leak any boost what-so-ever from the core. If you are concerned it may leak then try some Expoy Multi-Metal from Sprint / Autobarn for $10, BUT I CAN GAURANTEE IT WILL NOT LEAK! PRICE DROP S15: Unused Whiteline Subframe Bush set (Plus Polyurethane Type) - $150 ONO Stiffen up that chassis and minimise that horrible Noise, harshness and vibration on your daily / track car! S14 / S15: Unused and Unpackaged K&N Panel Filter - $80 FIRM Throw away that Ryco filter and get some air flow form a proven filter to provide better throttle response and economy. Unused Nismo 1.3 Bar Radiator Cap to suit all Skyline / Silvia models - $50 FIRM Hold that pressure in for more effective cooling! Velocity 12" Subwoofer including box in OK condition - $50 ONO. NOTE: There are some small dents at the front of the cone but nothing that should affect the output. Good for a low-mid end system without too many hassles. Good bass for the price paid. Comes with harness holders without the belts, one broken but usable. Also has a plate for cable attachments (2nd pic). S15: Used Clutch fork pivot ball from an Xtreme Clutch set - $30 ONO You will want this if you have an aftermarket kit and didn't install the upgraded clutch fort pivot ball to minimise the load that's placed on the standard one. 2nd Hand Gearbox and Engine Mounts from an S15, OK Condition - Make an offer. 8x NGK BCPR7ES to suit modified CA / RB Setups (will fit SR but not the preferred sparkplug) - $30 ONO In regards to contacting, please PM me and we can go from there. Cheers.

Will these fit S15 too? I'm assuming they do if they fit S14/R33 but just checking.