Dunc

I've heard positive things about Jez @ DVS Tuning but I dont know if he does basic mechanical work or not, or if its economically viable to have him do it. I'd suggest it is worth giving them a call to see what the options are or if they could recommend someone also.

Hi Nic, That one you're looking at fits both a 350z and NM35 AWD Stagea (as well as V35 Skyline). It's the very same one I had installed in my car a fortnight ago (literally that ebay seller, and that item). EPC Data for the PM35 350RX (2WD) has the same part (https://nissan.epcdata.ru/stagea/pm35/6844-vq35de/trans/400/40014/) and that's based off Nissans FAST data, I've never had an issue with part numbers from it. So I'm not sure what to tell you here other than that's the right part number, can you confirm you received the right part?

For what it's worth, I purchased some 2nd hand with the same intention. At first it solved my issue, but they too ended up sagging after not long also. I ended up getting mine re-gassed a couple of years ago now and haven't had any issues since.

Never seen one of those! How weird. Is there anything on the interior of the windows in the boot? A puck and some wires?

That integrated audio is crazy! I've never seen the speakers placed like that before. Was it done in Australia or did it come out like that?

Thats a lot of car for $3k! I can see why you jumped at that.

Welcome back mate. You just love a good project car, don't you

You're going to want to look at aftermarket seats imho, I'm 195cm and fit fine in my Stagea which has a set of Recaro's however in others my head will basically touch the roof.

I've never seen that second pocket! Mine has a weird Panasonic DVD drive in there for the GPS system.. that'll get ripped out eventually

Yes, if I'd had a kit or anyone I know had a kit I'd have used it. Fixed ages ago, it was a pig to drive getting on to boost as it basically leaking air and over fuelling (as you can tell) at about 3-3.5k

Split in the silicone hose on the cold side of the FMIC, took ages to find.I think I replaced every other silicone hose before I got to that one, as well as coil packs, spark plugs, hose clamps etc. Heres what it was running like:

Is it blowing smoke at all? Mine had similar symptoms to what you're describing plus the smoke blowing.

Any chance you've got the little shroud that goes around the key barrel in the M35?

I have no idea what formula you used.. but I'm going out on a limb to say its incorrect. TE = T*R*1000/r I dont know the gear ratios, diff ratios, or rolling radius of Matts tyres so it'd all be a stab in the dark. Dyno sheets are just a tuning tool, I'm looking forward to it having a run at AIR and seeing what numbers it can put down!

My friends couldn't believe it, I was skeptical it'd fit but wasn't outright shocked like they were.