Burgz32

O.K mate, an SR20 is a type of engine not a model of car, do you want standard R31 brake dics's???, or have your brake's been upgraded?? if there standard then Repco/Bursons/Auto service solution's are all the same regards Jon

i'm with WARPS, the greytronics gear is way above anything else out there. it's disign was done by the military, for use in Tank's so it's sound quality is awesome, cystal clear with no feed back or electrical interference, as this kind of thing in a Tank can make thing's go BANG!!! Cheers Jon

gotta love a limiter launch!!!!! also gotta love having a complete spare drive train in the workshop..... Mine was the Grey 1 with white wheel's...

Thanks champ, you can emial them to me if you like @ [email protected] Cheers

can you post some pic's mate, could be very intrested.. Cheers

just fitted the new power fc, booked in with the great Andy Kuc at pro automotive for a tune.. then hopfully Bosnjak engineering will have my caliper adaptor's finished so i can fit my DBA 5000 324mm rotor's

if there's anything i can do to help, just let me know old boy..

spotted, just about every 32 GTR in the state at baskeville today, great turn out... oooooooooo and poor old Funz's GTSt keeping it's self warm with a small under bonnet fire, at the side of the track

Got a couple instock at work mate Moonah Auto Salvage 62280274, ask for Jon (me) and mention the forum and look after you as best i can Cheers

sound's like it's gunna be a GTR fest!, looking forward to have a run, even better it's ment to rain sunday!!! have a spare engine and gearbox, so no need to spare the poor little thing, rev limiter launch's will be the order of the day..

so who else is having a run??, put my entry in today not the most exciting event, but you can have a real crack and know that you shouldn't hit to much... Cheers Jon

PM sent old mate Cheers Jon

have a full set of Bilstein height adjustable strutt's, 3 diffirent height setting's via a circlip, with 50mm lowered king spring's ordered them for a customer and they never picked them up, Boss what's they owe us which is $1450 Cheers Jon

being Marlin, it would be what your thinking.....

Hey Paul, spoke to you tuesday night about the cams, if you could get your mechanic's number thru to me so i can chat to him my number is below Cheers Jon 0417 156 234

your welcome champette, still have those hicas line's hear. i have a mate how live's in lonny and travel's to hobart for work once or twice a fortnight, would you like me to give them to him?? he live in prospect,.. Cheers Jon

it's to do with the wheel's being forged and not cast, wheel's that are cast contain some small air bubble's. as they melt the alloy, then tip it into a mould.. Forged wheel's, they heat the alloy till it's soft and plyable, then they stamp the wheel which mean's there are on air bubble's IE Spartan air, as in no air.. Cheers

you more than likely have 13/16th or 21mm nut's, best bet is uselly to use a spark plug socket, these are thin in the wall and will get you out of trouble. Nissan use 21mm wheel nut's, head down to your local tyre shop and buy some 19mm nut's and you should be right and i aggree DO NOT use those stupid inner hex nut's, the amount of these that i've had to remove is huge.. you have to drill the head of the stud, and it's a massive pain in the arse, and we charge $65 per nut removelly

this is what i'm checking tomorrow, i cant' see it being a head gasket, it would have shown up in the leak down and comprestion test's...

OK guy's, i have an R32 GTR, that's getting oil in the water both in the rad and in the overflow bottle not a huge amount maybe 30-40 mill's every 400k's engine is running fine, no misse's, no smoke, done comp and leak down test's, 150 in all 6, leak down is 3-4%, not bad for a donk with 120k's, rad pressure test show's nothing, oil pressure is fine also.. i'm not loosing oil or water, and it's only oil in the water no water in the oil.. any idea's??, i'm at lose!, have i cracked a head or block??, or is it something simple and common?? was thinking i may check the water cooler around the oil filter base, see if that's crack or corroded.. and idea's or prevous experence's would be greatlly appreciated cheers Jon

mmmmmmmmmmmmmm MCA's or as we call them MURRYFLEX, they are the single greatest thing you can do to any car, turned our tarmac car from a rough jumpy thing into a magic carpet ride...

do you have any spec's on the cam's??? Cheers

speaking of the Parsons TR7, YT is in NZ at the moment, spoke to him tuesday and he was doing lap's at hampton down's in Parson's rig, recon's it's a fair jigger....

i've got one at work ya borrow for the weekend, you'll just have to pick it up and drop it back.. it's in moonah

got 1 off an R33 GTS-r, 4 wheel drive 2.5 thing don't know if it's any good to you or not.. Cheers