zoom

sweetr33, my brother's friend might have just the exh housing for the vg30 left in his garage but need to clean up to find it! if you really interested let me know. i will ask him!!

Sorry it's r33 gtst. you meant zero degree in both inlet and exh?

Sydneykid, have you tried to advance on the inlet of r33 with as et of poncams?

guys, i've just finished my hybrid gcg highflow turbo and poncam in the weekend. i will get it tune in a fornight. the car feel stronger than the stage 1 gcg highflow but laggy. it hit 1 bar at about 3800rpm. will post my result as soon as i get it done!

looking to buy a nismo grille or gtr grille for white r33 gtst! please let me know if you have one for sell!

does anyone know where i can buy exhaust manifold studs (10mm x 1.25) for r33?

gts_evilution, you need the copper washers: the stock washers are: 4 x 12mm int. diameter - 18mm ext. dia 2 x 14mm int. dia - 20mm ext. dia 4 x 18mm int. dia - 24mm ext. dia. hope this will help!

i actually reused my old washers the last time i did it. now my turbo out again for the hybrid highflow turbo. It's all depending on the condition of the washers. But i would recommend to get new ones though but tight arse like me, i will have to keep my eyes out for leaks. ...

my turbo is out, so i will let you know tonight.

sorry didn't attached b4! :crazy: HERE is the stock r33 highflwed vs hybrid r33 and vg30 rear.

HERE is the stock r33 highflwed vs hybrid r33 and vg30 rear.

bass junky, did you get my email?

r33 comp has "45V1, 45V2, etc" correct me if i'm wrong.

Angry, the print on the rear turbine should read "OP6". Your pic, it seems that the rear turbine is rb25. I could be wrong but i will post the pics of the r33 and vg30 for comparison as soon as i get the pics. dennis

i'm about to return it back to the seller becoz it wont fit the r33 dump. It's a 300zx single turbo tho! the rear turbine is the same as VL turbo. If you wanna use it as to hybri highflow i dont think it will fit!! You need something esle!! it cost me $550 which is too much anyway if you have to mod the dump or something and importantly i dont think CGC will do it. :werd: i dont have the pics but look similar to your photo except it has only water cool line, unlike r33 where it has two lines (water & oil). dennis

Bass Junky, i've got bought the turbo similar to the one shown on ur pic but i think it's not the one you want because the rear flange is different to the r33! This turbo is off 300zx single turbo. I think Ian's is VG30det off something else!!

Cubes, Thanks mate, it's alot clearer now. I think what i've got is the 300zx single turbo 1988 model. i should have ask him for the VG30det rather the 300zx single turbo as i understood! :crazy: ....

the guy swear by it that it's came off the 300zx red engine single turbo 1988 model. The rear has 7 bolts which the same as "Cubes" attachment but the comp side seem similar but smaller!! :chairshot Ian, what year is the 300zx you have got and it has the same exhaust flange to r33?

i was told by this guy that it's a 300zx turbo! Note taht the compressor side is quite small when comparing to r33!! can anyone confirm that the waste gate integral with the dump is vl? :crazy:

Just got myself a 300zx single turbo! the rear turbine is slightly larger than r33gtst, however, the flange to the rear of the turbine and the wastegate seem to join to the dump pipe! :confused: Ian, does the 300zx flange bolt up the stock pipe?

wtb r33 gtst s1 nismo front grille in white! will consider GTR front grille if it fit! please PM me!

if it doesn't cut out when the warning light flashing then check for loose wires! if live in the western area i can give you a had to sort it out, pm me if you need help!

set the warning a 3 psi higher than you max psi!

what is your max/peak boost when it cut out?

me mean disconnect the bov and not using it? beside the bov is stock!