StilledCefiro

the deal is my old ceffy only if it is boonged up pretty bad, might be able to get it cheap (hahahahahahaha) as long as the drivline is all good i can fix the exterior up

i have permission (apparently) to get it back if it becomes available just getting a bit nostalgic in my old age haha so it would seem it needs rescuing i have to admit that kit was always a bitch to keep in one bit

Hi Guys, haven't been on here in a while. pretty impressed there is a WA Cefiro community happening. anyway reason i post is i was wondering if anyone has an idea as to where my old cefiro might be. it was the clearner of the two Red Speedwork sponser drift cefiro it had RB25 with HKS t300 turbo and external gate GTR front monnt with piping that looped back over the standard plenum five stud conversion, all adj arms in the rear red sparco drivers seat rest of interior was black there would be holes in the floor from the bolt in cage it did have thanks Stewart

Hey Guys, Just to let you know our next track day is on the 10th March at Collie Motorplex. It is a Full Day event,Cost for this event $70. Its a Test and Tune event, you will be divided into groups of 7 or 8 and let out on the track in 5-10 lap runs. Gates open at 8am, be there at 8am for scrutineering. The day ends at 4pm. All types of cars are welcome from Corollas, WRX's, Supra's, Skylines, Rx7's, Mx5, Falcodores. Requirements: Roadworthy Car Approved Helmet Long Clothing CAMS L2S License or Day License (available on the day). For any further enquries or To put your name down for a spot email [email protected]. Entrys in by 2nd March 2007 Cheers Stewart Kirk AFARCC Motorsport Co-Ordinator

this car lives in Perth, very hot in person and that laurel is hot

thats the weekend after Motorvation so that should be good my ceffy will be ready i dont know about froggys Stewart

for sure name a time and place stewart

here is a few of my baby how it is every day http://i16.photobucket.com/albums/b9/still...ro/0b1566f3.jpg drifting at wanneroo http://i16.photobucket.com/albums/b9/still...ro/_mg_3920.jpg http://i16.photobucket.com/albums/b9/still...ro/_mg_4004.jpg i just need a spare kit to go drifting with Stewart

the window works the cables just dont have enough tension to hold it in place or get it to go all the way to the top Stewart

Well the other week my front passanger window stopped working whilst being "wound" back up, stopped an inch from the top pulled it apart and found that the nylon bracket that tensions the wire the is used to pull the window up is broken now i'm assuming that i will have to replace the rail???? if so who has one and how much or how can i fix this i really want to be drivin my cefiro around, it suck drvin a toyota Stewart

power window amplifier for the rear windows nissan part number # 25424-71L00 (drivers side) just installed this in my car, works perfectly

please find below link to the poster for the up coming drift battle in Feb http://putfile.com/pic.php?pic=1/1800492121.jpg&s=x11 Stewart

new photos taken recently (ie yesterday) http://photobucket.com/albums/b9/stilledcefiro

will have fixed the power steering and the power windows next week(i hope) Stewart

This car is still for sale

offers around $15K would get the following mods 1988 Nissan Cefiro A31 R33 Series 2 RB25DET 5spd Gearbox from R33 Trust FMIC Trust Type R BOV FET turbo Timer Nismo 5 puk Clutch Nissan Standard LSD 5 Stud Conversion R33 Brakes Front and Rear Tein HR Coilovers with camber tops front, solid top hats rear Front Strut Brace Rear Subframe Alloy Bush Kit Sparco Race Seat 4-Point Sparco Harness Momo Steering Wheel Razo Shift Knob Full Bodykit Registered For 6months Oil Change done ever 5000kms Front 17"x8" with P6000 tyres 75% Rear 17"x9" with Bridgestone SO3 70%

Well i have recentrly purchased a project car, so i think it might be best if the cefiro goes 1988 Nissan Cefiro A31 R33 Series 2 RB25DET 5spd Gearbox from R33 3"dump/front pipe 3" Titanium Cat Back Trust FMIC Trust Type R BOV FET turbo Timer Nismo 5 puk Clutch Nismo(old school) Locked Diff (recently been reshimed, tight as) 5 Stud Conversion R33 Brakes Front and Rear Tein HR Coilovers with camber tops front, solid top hats rear Cusco Adjustable Castor Arms Adjustable Rear Camber Arms Adjustable Rear traction Arms Adjustable Rear Toe Arms Front Strut Brace Rear Subframe Alloy Bush Kit 6-Point Bolt In Roll Cage, Front Half Paded Sparco Race Seat 4-Point Sparco Harness Momo Steering Wheel Razo Shift Knob Full Bodykit MP3 Player Kenwood Front Speakers Registered For 6months Oil Change done ever 5000kms Front 17"x8" with P6000 tyres 75% Rear 17"x9" with Bridgestone SO3 70% This car handles very well. Price with mods listed $18K Price is subject to negotiation. Car is located in perth email me for more info [email protected]

Well i have recentrly purchased a project car, so i think it might be best if the cefiro goes 1988 Nissan Cefiro A31 R33 Series 2 RB25DET 5spd Gearbox from R33 3"dump/front pipe 3" Titanium Cat Back Trust FMIC Trust Type R BOV FET turbo Timer Nismo 5 puk Clutch Nismo(old school) Locked Diff (recently been reshimed, tight as) 5 Stud Conversion R33 Brakes Front and Rear Tein HR Coilovers with camber tops front, solid top hats rear Cusco Adjustable Castor Arms Adjustable Rear Camber Arms Adjustable Rear traction Arms Adjustable Rear Toe Arms Front Strut Brace Rear Subframe Alloy Bush Kit 6-Point Bolt In Roll Cage, Front Half Paded Sparco Race Seat 4-Point Sparco Harness Momo Steering Wheel Razo Shift Knob Full Bodykit MP3 Player Kenwood Front Speakers Registered For 6months Oil Change done ever 5000kms Front 17"x8" with P6000 tyres 75% Rear 17"x9" with Bridgestone SO3 70% This car handles very well. Price with mods listed $18K Price is subject to negotiation. email me for more info [email protected]

all three uni joint replaced, new center bearing, extension and the front yoke($120) got ripped $900

speedo cable is a good question, cefiro=manual speedo pickup rb25 gearbox=digital speedo pickup so u need to change the speedo sensor in the box to a manual pickup or change your speedo to digital(i did the later cost small fortune), apparently a sensor from a navara is suppossed to fit

yeah u need an rb25 slave cylinder, the mounting holes are different

the 25 box will go in the ceffy behind the rb20, but u will need to sort out clutch slave cylinder(they is different) and tailshaft(front tailshaft yoke is different and the rb25 box is shorter)

i have no idea if u are serious i may be able to look into it

i have some wheels for sale they look mint on a cefiro see link below http://www.skylinesaustralia.com/forums/sh...ead.php?t=64208 Stewart [email protected] 0422530361

yeah i thought i would try and post these again these are genuine SSR Longchamps same style as whats on KEn Satohs Hachi but not as wide they have tyre on them (fronts are great, rears not so great) wanting about $650ono will have exact dimension details tomorrow but they are 15" by about 7" i have put this in here cause they go onto cefiros no worries and they look mint