Jump to content
SAU Community

bmdrifta

Members
  • Posts

    52
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by bmdrifta

  1. Gotta keep it all in the Rob family!
  2. Ok, I want this gone. I'm going to pop it on carsales for $5,990 with stock brakes very soon. Make me an offer!
  3. I'm happy to remove front Big Brakes and put stock calipers back and let it go for $6,990
  4. Tein Flex Shocks sorry, not Super Street.
  5. 1996 R33 Skyline GTS25T Series 2, only done 147,000kms Black in color. Serviced regularly with hi grade oil. The car has never had any mechanical issues. Neat and clean apart from the front bar and bonnet (more details below). Whats Stock? Stock Turbo, running 12psi actuator, approximate power 180rwkw Stock ECU Stock SMIC (have FMIC to suit however pulled it off for RWC) Stock BOV Whats Not? Super big brakes on the front. 330mm Ksport 8 pot calipers with Bluestuff Pads Quiet Sleeper JDM catback exhaust. 17" Matt Black Rota Rims 9 inch wide with 255mm wide Advan Neova tyres (super grippy) These are $400 per corner for tyres alone. Immobilizer and alarm (central locking needs new actuators but wiring is there) Apexi style pod filter Turbo timer HICAS lock bar Unknown Clutch, but grabs brilliantly Tein Super Street Adjustable shocks and springs. Pioneer cd player Rear Strut Brace Front Strut Brace Have new tie rod ends to install Ok, now to the front bar and bonnet. I had an argument with a pole a while ago and wrecked the front bar and dented the very front of the bonnet. I replaced the front bar with a silver one. Check out the photos. The front bar will need a respray and either dint removed from the bonnet or a new bonnet. (Can supply a white bonnet to get resprayed if that's what you want to do). The respray should cost between $500 to $800 depending on how friendly you are with the s pray painters. I've been driving as it is for a year and a half, completely non structural. Comes without RWC and plates unless the right deal is struck. Viewing at 3199 Asking $7,800
  6. Dump pipe gone. I'm going to start putting things on eBay very soon so make me a reasonable offer and I will consider! Also have a drivers side R33 Universal Seat Mount. Looking for $80
  7. Sorry mate, paid and picked up last night. Gotta be quick!
  8. Turbo is going to cost $30 to post to Sydney. Sale also includes braided oil feed line and fitting worth over $50. Bushes are in good condition with no tares or anything. Yeh sorry mate, 24mm adjustable. Would be difficult to post for less than $40 but your only an hour away with east link. Would be cheaper to pickup. Cheers, Rob.
  9. The turbo is a stock r34 turbo that has been highflowed by Stao at Hypergear. (do a search on the forums if your not familiar with him) It has done approx 2000km since being highflowed still in perfect condition. It was running at 12psi on mine which was doing 220kw at the wheels. The limiting factor was the stock injectors though. Stao's tests show 280kw is easily possible on E85 with supporting mods, around 250rwkw on ULP. Response is kept almost stock with this turbo which is why I purchased for track. I wasn't going for raw power. Whiteline front swaybar to suit R33. 5 hole adjustable. There are a few scuffs on the paint but otherwise its great condition.
  10. Update, the harness bar and diff are paid and gone. Ive had some interest in the car as a complete setup however at this stage everything else is still up for sale. I forgot a few other parts to add to original $80 Drivers side seat rail to suit R33 mounting points $120 Front swaybar $75 R33 turbo manifold Also price drop on: $1200 Ksport 330mm 8 pot brakes. $1100 R34 Highflow Turbo
  11. Here are some pics, anything ive left out just let me know. Also Harness bar and Diff sold pending payment. Hypergear OP6 R34 Highflowed turbo. You can also see the turbo side of the Split Dump pipe in this pic. Its once peice right though to the cat. Strut Brace, radiator and crossover pipe for FMIC. ASI 52mm High performance Radiator. Ksport 330mm Big Brake kit. Velo Harness. 3 inch shoulder, 2 inch lap 4 point. Rotating Cam lock. Oil Cooler with relocation.
  12. Sorry mate, zoned out and forgot there was both abs and not abs. It's in an abs housing (has the hole for speed sensor) although its currently in a non abs car. I don't have a photo of the Center however I'll absolutly guarantee it's a 1.5way. Locks up hard under throttle and releases as soon as your off the loud pedal.
  13. JJR brand. Just core, Hoses and fittings. Has plugs for temp sensors but never installed any.
  14. Type of harness bar? I'll be getting pictures of everything tomorrow afternoon. Not sure what brand of diff, it came from a mates car when he bought it. He had two so I grabbed it for me. Locks up on power perfectly every time. Made oversteer out of slow speed corners much more predictable. Just in a standard R33 housing.
  15. So the decision is made that I'm getting out of track days for the next few years. To sell the car and make it roadworthy I'm getting rid of almost all the upgrades I’ve done over the past couple of years. All parts are all still currently on the car and all working flawlessly. Its also daily so may take a weekend to remove parts. Car is a Black R33 GTS-T If there is any interest in the car I am open to selling the whole package while everything lasts. Otherwise I will be putting back to stock before selling. $1200 Power FC $1200 Hypergear OP6 High flowed $250 19 row Oil Cooler with Filter Relocation $100 Drift Seat (Cheep autobarn special. The side is a little damaged by getting in and out) $140 Harness Bar $250 4 Point Harness $150 Strut Brace $150 Split Dump Pipe $1500 Ksport 8pot Brake kit. (Calipers, 2 part disks, Bluestuff pads) $150 ASI 52mm Radiator $150 Xforce 3inch Cat Type 1 $500 1.5 way Mechanical Diff in housing. $300 FMIC Kit Can Post pics or welcome to view items on the car. Make an offer to Rob 0430 310 430 Pickup from 3199
  16. Yeh didn't hit the dirt, but still lots of brown stuff around! It warmed up the tires for the next lap though I also hope neither of us out do that effort!
  17. yeh mate, the 180 spin just topped it all off! I hate boasting, but ive done a 270 up the strait at winton so still wining on a technicality http://www.youtube.com/watch?v=5Z1QfhjflPg Enjoyed looking at that concrete wall few times before coming to a stop... on the plus side, I got a cheer!
  18. dam, ive been outdone
  19. Yep 95% ill be there
  20. haha yeh, I might be able to at least match him if you convince 2 other (slow) std people to come along maybe keep the nails for his cooler
  21. haha sorry mate. I did happen to catch the score On another note, I will be checking for nails in my tires
×
×
  • Create New...