Jump to content
SAU Community

PROXIMITY

Members
 View Profile  See their activity

  • Posts

    339

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by PROXIMITY

  1. PROXIMITY
    Def a tooth out, thats terrible when you pay for stuff to get done from certified people.
  2. PROXIMITY
    lol at ARC prices, they will have same power levels as fmic with loads more response. Cheaper alternative is the 34 smic theyre good for the power your asking and flow very well. They use 80mm core, i have used them with 220-230 and been very happy compared to my fmic setups.
  3. PROXIMITY
    Over here on Adelaide, OZ, We have suspension places that do wheel allignments, shocks and replace all types of bushes standard and aftermarket. Whiteline is a great option slightly expensive yes but you will find the poly not adjustments to nearly be the same price, expect few hundred installed but the car will drive so much better. Good luck
  4. PROXIMITY
    I had this same problem thought it was broken so bought another one, only to find when i removed it was not broken on either end. The shaft that goes into the back of the cluster may not be pushing up enouogh ( stretch the spring or find another way of extending it.
  5. PROXIMITY
    Make sure its a reputable tyre place and they have done your type of car before.
  6. PROXIMITY
    My mate also has the 280 speedo in his ceffy and funny thing is it was NA lol
  7. PROXIMITY
    At a price lol ^^^^ I cut the standard auto surround, looks neat enough and used the back part of the 32 console which also looks neat enough.
  8. PROXIMITY
    Very nice. Everyone does the GTR bar thou would like to see sumfin bit different maybe.
  9. PROXIMITY
    Not sure with the rb26 but in rb20 when running bigger radiator you use part of an rb30 clutch it moves it back 10-15 mm.
  10. PROXIMITY
    agreed with others. Stock bovs are forever opening at any rev really when backing off as the spring is very soft. Something is wrong with yours if its only opening up that high, i would replace it because too much flutter will help Mr Ceramic wheel fall of earlier than it should lol.
  11. PROXIMITY
    Wasnt jumping, but i just had exactly the same thing happen without the noise.. The bearing i guess was not working, it was still silent, would boost then not boost untill the front wheel snapped off. A stuffed actuator is not going to stop the car revving but a failed bearing/turbo will.
  12. PROXIMITY
    ARC smic FTW if you want response =)
  13. PROXIMITY
    I think the stock one starts leaking around 14psi Anyone confirm this ?
  14. PROXIMITY
    Your turbo is farked !
  15. PROXIMITY
    Last time i checked, Bill at ATS sells them for round $350 and Vg's for $500.
  16. PROXIMITY
    leak between the afm and turbo, makesure all clamps are tight and sealed. Also you could have too much blow by in the cooler.Clean this out degreaser or something.
  17. PROXIMITY
    Unplug the standard solenoid thing, and use all new vaccumm hoses. you should be able to have whatever 2 presets you want within reason.
  18. PROXIMITY
    Thanks for the useless post mate.. Have you bought anything from viva that fits, and btw they are not the same skirts smart ass these were custom made and have not been used, so f*kk off.
  19. PROXIMITY
    What isnt illegal now lol.. Hide the boost controller and any split in your vac lines to run it. In S.A i have seen regency defect a bov if its plumback but not the factory plumback lol.. Rb20 should have a 9psi actuator, rb25 actuator is 7psi
  20. PROXIMITY
    A/F just runs of the 02 sensor wire going to your computer. Not completely accurate but gives you good idea, only accurate if you run a wide band 02 sensor. EGT ?
  21. PROXIMITY
    I have run the split dump on both my rb's withou this issue. One with an Ebc and the other with dual stage turbo smart. On both i die grinded all the inside smooth and made the divider much thinner.
  22. PROXIMITY
    i have stuffed up many of those screws grr, $&^$ of a location on the back one. Lots of crc and an impact driver on the first one will get it off, and the back one a right angled ratchet with p/h to suit. Have had a couple were the front ones are loose enough just with screwdriver. Then replace it with a bolt on Nissmo or tomei item Good luck
  23. PROXIMITY
    Nothing wrong with standard struts and a/m hardened/ lowered springs providing struts in good nick. How long they last no1 knows thou, But new stock struts and springs ride awesome.
  24. PROXIMITY
    replace with new items.
  25. PROXIMITY
    Just go into a reputable tyre/ wheel shop they should have many odd ones around you could check, otherwise order new.
×
×
  • Create New...