legend01

This was fixed today ended up being a faulty map senser thanks guys for the help and all the reply's cheers Peter

Hi Draconis About the easiest way for you to find the answer to this question would be to have a look in the forced induction section at the dyno graphs,or in same section the top rb20 club .there's about 64 pages of people who are making big hp with rb20's relyably its onpage 2 atm. I was making over 280rwkw for 12 months on a stock bottom end check them out im sure you'll find the answers you want there Cheers Peter

No, direct fire has splitfire coil packs

BHdave Its a new nismo pump so farily quiet hard to hear but I do still have fuel pressure by the gauge

Zoltarc I don't have a laptop to plug into the ecu to do those sort of annalace on the cpu atm just wanna try what I can b4 i get it towed to the tuner MBS206 the cams are the same hks items the adjustable cam gear settings havn't been touched head was ported in old set up only differance is the 1mm oversized valves and I don't think thats enough to stop it from firing but thanks for the idea's

rb26s13 I did think of that and checked no OVL-747 I thought i might have done that but when I took the fuel line off b4 the reg it pumped out fuel like a presure hose

MBS206 the set up was on the old engine nothing's been changed same cms,turbo manifold cam settings just been freshend up.wont run at throttle dead32 when running is sounds smooth and quiet sounds good for that couple seconds,haltes e11v2 is the ecu needs a laptop to have a look for any errors and I dont have one atm cheers Peter

dead32 just tried unplugging that and spraying it with contact cleaner all to no avail .It'll be something small I've overlooked u can bet on that

Keeper brand new fuel pump and fresh fuel already in anf brank new fuel filter high flow Ken Yes mate going of the dial whilst cranking undolted the line jsut to make sure fuel was getting through and turned it on filled orchie bottle in no time Kinks Yes mate plugged in no afm after market computer

Hi Guys Just finished putting in and plumbing up new engine fresh rebuild ,now car will fire and run for about 2 to 5 seconds then stall ,Its getting fuel its fireing otherwise it wouldn't run for those couple seconds it just wont stay running just pulling of the fast idle now to check just looking for ant other idea's I might be missing as to cause of problem Cheers Peter

Wooo nice result with plenty usable power there

Try this guy http://www.jsai.com.au/

Well uuummmmm damnation ,Ill have ta wipe me chin Im salavating

is the diff just the centre or the whole assembly ?

Go with closest its the best way

I'll want to do the b4 and after thing with my rb20 after its all run in and going properly with the plazma man plenum just to see if there are any gains,but thats a while off just yet

I run custom 3" front pipe to catco stainless barrel cat 3.5" to the resinator 4" from there to the cannon its a hks exhaust .I picked up 12rwkw when I did thisover my old 3" exhaust and that was a trial Cheers Peter

I had mine checked out at all about gearboxes at girraween.After the crash I didn't know if there was any damage to the box so took it there and had it checked,he welded up a small crackin the rear housing checked the gears and syncroses and bearing's said all was fine cost me $250 Cheers Peter PS web site. www.allaboutgearboxes.com

Its a big jigsaw puzzle half the fun is figgeren it out and the headaches

Pictoral on hicas the larger lines seen in pic's are the hicas ones and were removed

Hi All getting closer just thought id post some picks of some intresting info i came across with the nismo fuel pump and the gtr fuel pump seems there the same numbers on them tried to take a pic but don't think they turned out to well, bought from nengun and same part numbers for rb20 and sr20det the nismo one has a band around the top.And a bit of a pictoral on removing the hicas and plumbing and what I did the reroute the p/s fluid and fitting hicas lock bar as well as fitting pineapples for traction

Waiting, waiting, waiting

Or you can get a permit from nsw rta that allows you to drive unregistered car from point a to b

I just pulled the whole assembly and diff out my 93 model gtst what are you after ??? its viscus

Way to go roy .So whats this new motor im hearing about ?????