aerofocker

what about that durafix stuff?just an idea

the nuts are not working loose imo, maybe the thread pitch is 1.25, its over a year since i fitted the turbo, the lock nuts are about 17 mm and squashed oval, the stud actually stretches when it reaches red heat,it was far worse when I had the .63 housing from atp , I know what i need roughly just I cannot find them local to me

Im looking for inconel bolts and lock nuts for my own 3071 spacer set up,iirc the studs need to be about 50 - 60 mm and the thread pitch is m10 x 1.5 I cannot seem to locate the studs anywhere, pm me if you know where I can source the studs as im tired of tightening the existing arp studs about once every few months thanks in advance

so so many negative people! try it and see and report back your results, its better to do that than give these cocks the chance to spout off, in the real world they would just get a punch in the mouth and be on their way but this is the internet and the cock is free to shxit on everyone, I believe the idea is at least worth trying, best of luck with it!

nobody in their right mind would do this to a working engine surely,you need a slap in the face lol not a destroked rb25, why the hell would people use rb30s? oh i just realized...school holidays... has to be

was the test performed properly as in, fuel pressure dumped, throttle wide open all plugs removed?

any sign of updates?

oil starvation lol standard response

its quite reasonabel to suspect a boost leak,its the cheapest and easiest to find, as stated before im only interested in the guy getting his car sorted and giving plenty abust to those that are full of crap, enjoy your nm35s lads

outside the Japanese language we are it for the vq25det, congrats maybe i touched a nerve ha ha where exactly do you think i work by the way? and how do you get the impression i think these cars run on carbs? perhaps i should put more info for you in my personal profile?maybe my hourly rate?

ill always take the piss out of the internet mechanics because i empathise with the person with the fault who has to trawl through all the endless shite posted to find their problem, afm should have been fault code 12 on the ecu iirc, when diagnosing a fault with these symptoms i would always check intercooler pipework first then interrogate the ecu for fault codes for the others eg afm cas ect ect,usually with the afm the car just wont go above 2krpm, i just wish i had more time to give the internet mecs more abuse

what,you think i get my knowledge from these forums and the internet? has the guy resolved the problem?have you got a better call cockmaster? dont call me friend either

intercooler pipe has likely blown off, lol at the internet mechanics

yea what about the people the smash in to? i would be dead if i had a powerfull car as my first,ach hey your train set!

bump,japanese translation would help